Why do quality and reliability feedback loops not always work in practice: a case study

P.A Molenaar,A. Huijben,D. Bouwhuis,A. Brombacher

DOI: https://doi.org/10.1016/S0951-8320(01)00117-X

IF: 7.247

2002-03-01

Reliability Engineering & System Safety

Abstract:

What problem does this paper attempt to address?

Oriented Crystal Growth of Li 0.33 La 0.557 TiO 3 Nanowire Induced by One-Dimensional Polymer Sheath toward Rapid Lithium-Ion Transfer

Weijie Kou,Junmei Zhang,Chenye Wang,Wenjia Wu,Jie Zhang,Zhirong Yang,Kun Dai,Jingtao Wang

DOI: https://doi.org/10.1021/acsnano.4c09863

IF: 17.1

2024-09-27

ACS Nano

Abstract:Superionic conductor-based solid-state electrolytes with preferred crystal structures hold great promise for realizing ultrafast lithium-ion (Li^(+)) transfer, which is urgently desired for all-solid-state lithium batteries. However, the precise control of crystal growth of superionic conductors is still challenging since the crystals always spontaneously grow to disordered structures with the lowest internal energy to ensure thermodynamic stability. Herein, a coaxial nanowire with a...

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology
Preparing Two-Dimensional Ordered Li0.33 La0.557 TiO3 Crystal in Interlayer Channel of Thin Laminar Inorganic Solid-State Electrolyte towards Ultrafast Li+ Transfer

Ruixin Lv,Weijie Kou,Shiyuan Guo,Wenjia Wu,Yatao Zhang,Yong Wang,Jingtao Wang

DOI: https://doi.org/10.1002/anie.202114220

2022-02-07

Abstract:Inorganic superionic conductor holds great promise for high-performance all-solid-state lithium batteries. However, the ionic conductivity of traditional inorganic solid electrolytes (ISEs) is always unsatisfactory owing to the grain boundary resistance and large thickness. Here, a 13 μm-thick laminar framework with ≈1.3 nm interlayer channels is fabricated by self-assembling rigid, hydrophilic vermiculite (Vr) nanosheets. Then, Li0.33 La0.557 TiO3 (LLTO) precursors are impregnated in interlayer channels and afterwards in situ sintered to large-size, oriented, and defect-free LLTO crystal. We demonstrate that the confinement effect permits ordered arrangement of LLTO crystal along the c-axis (the fastest Li+ transfer direction), permitting the resultant 15 μm-thick Vr-LLTO electrolyte an ionic conductivity of 8.22×10-5 S cm-1 and conductance of 87.2 mS at 30 °C. These values are several times' higher than that of traditional LLTO-based electrolytes. Moreover, Vr-LLTO electrolyte has a compressive modulus of 1.24 GPa. Excellent cycling performance is demonstrated with all-solid-state Li/LiFePO4 battery.
Oriented Crystal Growth of La 0.557 Li 0.330 TiO 3 in Bulk Ceramics Induced by LaAlO 3 Single-Crystal Fibers

Tao Wang,Rafael B. de Oliveira,Marcello R. B. Andreeta,Haoyuan Wang,Zhitai Jia,Xutang Tao

DOI: https://doi.org/10.1021/acs.cgd.0c01518

2021-01-26

Abstract:Perovskite La0.557Li0.330TiO3 (LLTO) has been considered as one of the most promising solid-state electrolytes for lithium-ion batteries because of its high bulk ionic conductivity at room temperature (∼10–3 S/cm). However, the full potential of this compound, as a ceramic electrolyte, is limited by the low ionic conductivity of the grain boundary (<10–5 S/cm). One way to avoid the grain boundary barrier is to introduce LLTO crystals connecting the two electrodes. In this work, using LaAlO3 (LAO) single-crystal fibers as seeds, the conditions for oriented crystal growth of the LLTO compound, inside a bulk ceramic, are presented and discussed for different crystallographic directions ([100], [110], and [111]). The relationship between the LLTO crystal region and sintering parameters was investigated in detail, and a maximum growth rate was obtained using a [111]-oriented LAO single-crystal fiber. It is also shown that anisotropic epitaxial growth behaviors of LLTO crystals, in the LLTO/LAO composites, could be explained by morphological analysis and DFT simulations. The successful implementation of controllable LLTO crystal growth provides a feasible design for new solid-state electrolytes.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.cgd.0c01518?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.cgd.0c01518</a>.Experimental section about the growth of oriented LAO crystal fibers and DFT computation parameters (<a class="ext-link" href="/doi/suppl/10.1021/acs.cgd.0c01518/suppl_file/cg0c01518_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

chemistry, multidisciplinary,materials science,crystallography
Improved Li-ion Diffusion and Stability of a LiNi0.5Mn1.5O4 Cathode Through in Situ Co-Doping with Dual-Metal Cations and Incorporation of a Superionic Conductor

Weijie Liu,Qiang Shi,Qunting Qu,Tian Gao,Guobin Zhu,Jie Shao,Honghe Zheng

DOI: https://doi.org/10.1039/c6ta08891k

IF: 11.9

2017-01-01

Journal of Materials Chemistry A

Abstract:The co-doping with metal cations and incorporation of the Li7La3Zr2O12 (LLZO) superionic conductor into spinel LiNi0.5Mn1.5O4 are achieved in situ through a spray drying method by co-doping with Zr and La elements. Microscopic structural characterizations reveal that the doping of hetero-cations into LiNi0.5Mn1.5O4 is effective at reducing the amount of Mn3+, enhancing the cation ordering, and improving the structural stability of LNMO crystals. Scanning transmission electron microscopy (STEM) and Energy Dispersive Spectrometric (EDS) analyses validate the successful growth of LLZO during the calcination of the LNMO material. Incorporation of the LLZO superionic conductor into the bulk phase of LNMO considerably improves the intrinsic lithium diffusion rate within the crystal. Electrochemical studies reveal that the LNMO/LLZO composite at 50 : 1 ratio exhibits the best overall electrochemical behavior, in terms of reversible capacity, rate capability, and long-term cycling performance. At 20C discharge rate, the composite cathode delivers a capacity of 84.5 mA h g(-1), whereas the pristine LNMO only maintains 14.8 mA h g(-1) capacity. After 300 cycles, a capacity retention of 95.9% is obtained for the composite electrode, but only 87.6% for the pure LNMO cathode. The lithium ion diffusion coefficient of 1.83 x 10(-10) cm(2) s(-1) is obtained for the composite cathode, which is three times as high as that of pure LNMO (6.43 x 10(-11)).
Microscopic Origin of the Ionic Transport Behaviors in Solid Electrolytes for Li Batteries

Cheng Ma,Chengdu Liang,Karren More,Miaofang Chi

DOI: https://doi.org/10.1149/ma2014-01/2/301

2014-01-01

ECS Meeting Abstracts

Abstract:Recently Li-ion-conducting solid electrolytes have received intensive research interest, as they provide solutions for issues associated with the organic liquid electrolytes in conventional Li-ion batteries. However, despite the relatively high bulk conductivity achieved in many solid electrolytes, the grain-boundary conductivity is frequently low and limits the application. Detailed atomic structure and elemental distribution on the grain boundaries in these materials must be revealed in order to fundamentally understand the origin of large grain-boundary resistance. Such studies, however, are currently very rare. Here we present a detailed atomic scale study on the conduction behaviors of an extensively studied solid electrolyte (Li3x La2/3-x )TiO3 (LLTO). Using aberration-corrected scanning transmission electron microscopy (STEM) and the associated electron energy loss spectroscopy (EELS) analysis, we found that the large grain-boundary resistance of LLTO arose from the intrinsic local structural reconstruction, which is energetically not favorable for Li accommodation. Therefore, large flux of charge carriers was unlikely to occur both along and across the grain boundary, leading to the poor grain-boundary conductivity. The relationship among the processing condition, microstructure, and ionic conductivity was established. And the ionic transport behavior in LLTO is further compared to that in garnet-type Li7La3Zr2O12. These results paved the way for further improvement of the Li-ion-conducting solid electrolytes.
Anomalous High Ionic Conductivity of Nanoporous Β-Li3ps4

Zengcai Liu,Wujun Fu,E. Andrew Payzant,Xiang Yu,Zili Wu,Nancy J. Dudney,Jim Kiggans,Kunlun Hong,Adam J. Rondinone,Chengdu Liang

DOI: https://doi.org/10.1021/ja3110895

IF: 15

2013-01-01

Journal of the American Chemical Society

Abstract:Lithium-ion-conducting solid electrolytes hold promise for enabling high-energy battery chemistries and circumventing safety issues of conventional lithium batteries. Achieving the combination of high ionic conductivity and a broad electrochemical window in solid electrolytes is a grand challenge for the synthesis of battery materials. Herein we show an enhancement of the room-temperature lithium-ion conductivity by 3 orders of magnitude through the creation of nanostructured Li(3)PS(4). This material has a wide electrochemical window (5 V) and superior chemical stability against lithium metal. The nanoporous structure of Li(3)PS(4) reconciles two vital effects that enhance the ionic conductivity: (1) the reduction of the dimensions to a nanometer-sized framework stabilizes the high-conduction β phase that occurs at elevated temperatures, and (2) the high surface-to-bulk ratio of nanoporous β-Li(3)PS(4) promotes surface conduction. Manipulating the ionic conductivity of solid electrolytes has far-reaching implications for materials design and synthesis in a broad range of applications, including batteries, fuel cells, sensors, photovoltaic systems, and so forth.
Lithium Lanthanum Titanate Single Crystals: Dependence of Lithium-Ion Conductivity on Crystal Domain Orientation.

Daisaku Yokoe,Y. Fujiwara,Y. Ikuhara,S. Kobayashi,Kazuaki Kawahara,A. Kuwabara

DOI: https://doi.org/10.1021/acs.nanolett.2c01655

2022-06-13

Abstract:Lithium lanthanum titanate La2/3-xLi3xTiO3 (LLTO) has the potential to exhibit the highest Li-ion conductivity among oxide-based electrolytes because of the fast Li-ion diffusion derived from its crystal structure. Herein, bulk Li-ion conductivity of up to σbulk = 4.0 × 10-3 S/cm at 300 K, which is approximately three to four times higher than that of LLTO polycrystals, was demonstrated using LLTO single crystals, and their dependence on crystal domain orientation was examined. A change in the activation energy, which was previously obscured because of random crystal orientation, was observed at approximately 260 K. Furthermore, electron microscopy analysis indicated that the ionic conductivity of LLTOs remained higher because the region with the highest ionic conductivity was tilted away from the ideal conduction orientation. The results reported herein provide the highest conductivity in LLTO and important insights into their crystal structures, enabling higher conductivity in novel oxide-based electrolyte design.

Chemistry,Medicine,Materials Science
Open-Structured Nanotubes with Three-Dimensional Ion-Accessible Pathways for Enhanced Li + Conductivity in Composite Solid Electrolytes

Song Hu,Lulu Du,Gang Zhang,Wenyuan Zou,Zhe Zhu,Lin Xu,Liqiang Mai

DOI: https://doi.org/10.1021/acsami.0c22635

2021-03-09

Abstract:Composite solid electrolytes (CSEs) hold great promise toward safe lithium metal batteries with high energy density, due to integration of the merits of polymer matrixes and fillers. Rational design of filler nanostructures has attracted increasing attention for improving the ionic transport of CSEs in solid batteries. In this work, we fabricated open-structured Li0.33La0.557TiO3 (LLTO) nanotubes (NTs) as ion-conductive fillers in CSEs by a gradient electrospinning method for the first time. Different from nanoparticles (NPs) and nanowires (NWs), our nanotubes are composed of connected small NPs, which offer three-dimensional (3D) Li+-accessible pathways, large polymer/filler interfacial ionic conduction regions, and enhanced wettability against the polymer matrix. As a result, the solid electrolytes based on LLTO NTs and polyacrylonitrile (PAN) can display a high ionic conductivity of up to 3.6 × 10–4 S cm–1 and a wide electrochemical window of 5 V at room temperature (RT). Furthermore, Li–Li symmetric cells using the LLTO NTs/PAN CSE can work stably over 1000 h with a polarization of 20 mV. LiFePO4–Li full cells exhibit a high capacity of 142.5 mAh g–1 with a capacity retention of 90% at 0.5 C after 100 cycles. All of these results demonstrate that the design of open-structured nanotubes as fillers is a promising strategy for high-performance solid electrolytes.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c22635?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c22635</a>.Details for structural and electrochemical characterizations; SEM images of LLTO nanotubes at different calcination temperatures; SEM images of the Li metal surface before and after cycling; TGA curves of different molecular-weight PVP and LLTO NTs/PAN CSEs from 35 to 800 °C; XRD patterns of LLTO NTs; BET result of LLTO with different structures; Li ion transference number and ionic conductivity of as-obtained solid electrolytes; and charge/discharge profiles of full batteries based on a high-voltage cathode (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c22635/suppl_file/am0c22635_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

materials science, multidisciplinary,nanoscience & nanotechnology
Self-organized hetero-nanodomains actuating super Li+ conduction in glass ceramics

Yantao Wang,Hongtao Qu,Bowen Liu,Xiaoju Li,Jiangwei Ju,Jiedong Li,Shu Zhang,Jun Ma,Chao Li,Zhiwei Hu,Chung-Kai Chang,Hwo-Shuenn Sheu,Longfei Cui,Feng Jiang,Ernst R. H. van Eck,Arno P. M. Kentgens,Guanglei Cui,Liquan Chen

DOI: https://doi.org/10.1038/s41467-023-35982-7

IF: 16.6

2023-02-07

Nature Communications

Abstract:Abstract Easy-to-manufacture Li 2 S-P 2 S 5 glass ceramics are the key to large-scale all-solid-state lithium batteries from an industrial point of view, while their commercialization is greatly hampered by the low room temperature Li + conductivity, especially due to the lack of solutions. Herein, we propose a nanocrystallization strategy to fabricate super Li + -conductive glass ceramics. Through regulating the nucleation energy, the crystallites within glass ceramics can self-organize into hetero-nanodomains during the solid-state reaction. Cryogenic transmission electron microscope and electron holography directly demonstrate the numerous closely spaced grain boundaries with enriched charge carriers, which actuate superior Li + -conduction as confirmed by variable-temperature solid-state nuclear magnetic resonance. Glass ceramics with a record Li + conductivity of 13.2 mS cm −1 are prepared. The high Li + conductivity ensures stable operation of a 220 μm thick LiNi 0.6 Mn 0.2 Co 0.2 O 2 composite cathode (8 mAh cm −2 ), with which the all-solid-state lithium battery reaches a high energy density of 420 Wh kg −1 by cell mass and 834 Wh L −1 by cell volume at room temperature. These findings bring about powerful new degrees of freedom for engineering super ionic conductors.

multidisciplinary sciences
Utilizing fast ion conductor for single-crystal Ni-rich cathodes to achieve dual-functional modification of conductor network constructing and near-surface doping

Xin''an Zhou,Feilong Zhang,Xiaolan Fu,Ningshuang Zhang,Jin Huang,Xingpeng Cai,Hao Ding,Baoqiang Li,Lei Niu,Shiyou Li

DOI: https://doi.org/10.1016/j.ensm.2022.07.029

IF: 20.4

2022-11-01

Energy Storage Materials

Abstract:Ni-rich transition metal oxides are regarded as appealing candidate cathodes for next-generation lithium batteries because of their high discharge capacity. Single-crystal is an effective means to restrain the formation of microcracks to improve the cyclic property of LiNi0.8Co0.15Al0.05O2 (NCA) materials. Nonetheless, critical structural and interfacial instabilities make single-crystal NCA cathodes hard to achieve ideal electrochemical performance at high voltage. Herein, the fast ion conductor Li5La3Nb2O12 with higher conductivity and wider electrochemical window was selected as the material to enhance the high voltage performances for single-crystal NCA. Interestingly, density functional theory calculations found that La and Nb have different distribution characteristics in NCA. Therefore, we take advantage of oxidation reaction and element diffusion during high temperature sintering to achieve dual-functional modification of La-rich conductor network constructing and near-surface Nb doping for single-crystal NCA material. Impressively, the modified electrodes exhibit excellent cycling performances with a retention of 82.9% after 500 cycles at 2.7–4.3 V and even outstanding stability under extended cutoff voltage as well as improved rate capabilities. Detailed study reveals that the doped Nb with stronger Nb-O bond can suppress the migration of transition metal ion, thus impeding the distortion of material structure. Meanwhile, surface ion-conductor network layer provides fast Li+ diffusion channels as well as protecting interface layer from electrolyte decomposition products. The facile approach of Li5La3Nb2O12 modification proposed in this manuscript is suitable to solve interfacial instability and structure stability for cathodes but not only for single-crystal NCA, which provides application hopes for high energy lithium-ion batteries.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology
In Situ Constructing Robust and Highly Conductive Solid Electrolyte with Tailored Interfacial Chemistry for Durable Li Metal Batteries

Yingmin Jin,Yumeng Li,Ruifan Lin,Xuebai Zhang,Yong Shuai,Yueping Xiong

DOI: https://doi.org/10.1002/smll.202307942

IF: 13.3

Small

Abstract:Employing nanofiber framework for in situ polymerized solid-state lithium metal batteries (SSLMBs) is impeded by the insufficient Li+ transport properties and severe dendritic Li growth. Both critical issues originate from the shortage of Li+ conduction highways and nonuniform Li+ flux, as randomly-scattered nanofiber backbone is highly prone to slippage during battery assembly. Herein, a robust fabric of Li0.33La0.56Ce0.06Ti0.94O3-δ/polyacrylonitrile framework (p-LLCTO/PAN) with inbuilt Li+ transport channels and high interfacial Li+ flux is reported to manipulate the critical current density of SSLMBs. Upon the merits of defective LLCTO fillers, TFSI- confinement and linear alignment of Li+ conduction pathways are realized inside 1D p-LLCTO/PAN tunnels, enabling remarkable ionic conductivity of 1.21 mS cm-1 (26 °C) and tLi+ of 0.93 for in situ polymerized polyvinylene carbonate (PVC) electrolyte. Specifically, molecular reinforcement protocol on PAN framework further rearranges the Li+ highway distribution on Li metal and alters Li dendrite nucleation pattern, boosting a homogeneous Li deposition behavior with favorable SEI interface chemistry. Accordingly, excellent capacity retention of 76.7% over 1000 cycles at 2 C for Li||LiFePO4 battery and 76.2% over 500 cycles at 1 C for Li||LiNi0.5Co0.2Mn0.3O2 battery are delivered by p-LLCTO/PAN/PVC electrolyte, presenting feasible route in overcoming the bottleneck of dendrite penetration in in situ polymerized SSLMBs.
Flux Synthesis of A‐site Disordered Perovskite La0.5M0.5TiO3 (M═Li, Na, K) Nanorods Tailored for Solid Composite Electrolytes

Tao Wang,Jiyoung Ock,X. Chelsea Chen,Fan Wang,Meijia Li,Matthew S. Chambers,Gabriel M. Veith,Lauren B. Shepard,Susan B. Sinnott,Albina Borisevich,Miaofang Chi,Amit Bhattacharya,Raphaële J. Clément,Alexei P Sokolov,Sheng Dai

DOI: https://doi.org/10.1002/advs.202408805

IF: 15.1

2024-11-28

Advanced Science

Abstract:Single crystal La0.5M0.5TiO3 (LMTO, M═Li, Na, and K) nanorods with an A‐site‐disordered, cubic perovskite phase are synthesized by a flux strategy. The flux media promotes the oriented growth of nanorods, prevents nanorods from sintering, and provides multiple alkali metal ion doping at M sites to stabilize the cubic phase. Inorganic fillers play an important role in improving the ionic conductivity of solid composite electrolytes (SCEs) for Li‐ion batteries. Among inorganic fillers, perovskite‐type lithium lanthanum titanate (LLTO) stands out for its high bulk Li+ conductivity on the order of 10−3 S cm−1 at room temperature. According to a literature survey, the optimal LLTO filler should possess the following characteristics: i) a single‐crystal structure to minimize grain boundaries; ii) a small particle size to increase the filler/polymer interface area; iii) a 1D morphology for efficient interface channels; and iv) cubic symmetry to facilitate rapid bulk Li+ diffusion within the filler. However, the synthesis of single crystal, 1D LLTO nanomaterials with cubic symmetry is challenging. Herein, a flux strategy is developed to synthesize La0.5M0.5TiO3 (LMTO, M═Li, Na, and K) single‐crystal nanorods with an A‐site‐disordered, cubic perovskite phase. The flux media promotes the oriented growth of nanorods, prevents nanorods from sintering, and provides multiple alkali metal ion doping at M sites to stabilize the cubic phase. SCEs compositing the Li+‐conducting LMTO nanorods as fillers and poly[vinylene carbonate‐co‐lithium sulfonyl(trifluoromethane sulfonyl)imide methacrylate] matrix exhibit more than twice the conductivity of the neat polymer electrolyte (30.6 vs 14.0 μS cm−1 at 303 K).

materials science, multidisciplinary,nanoscience & nanotechnology,chemistry
Competitive Li-ion Coordination for Constructing a Three-Dimensional Transport Network to Achieve Ultra-High Ionic Conductivity of a Composite Solid-State Electrolyte

Yiteng Ma,Yong Qiu,Ke Yang,Shun Lv,Yuhang Li,Xufei An,Guanyou Xiao,Zhuo Han,Yuetao Ma,Likun Chen,Danfeng Zhang,Wei Lv,Yun Tian,Tingzheng Hou,Ming Liu,Zhen Zhou,Feiyu Kang,Yan-Bing He

DOI: https://doi.org/10.1039/d4ee03134b

IF: 32.5

2024-01-01

Energy & Environmental Science

Abstract:The porous structure of poly(vinylidene fluoride) (PVDF)-based polymer electrolytes and their disordered ion transport properties restrict the continuous and highly efficient transport of lithium ions (Li+), which is a major challenge in further improving ionic conductivity. Herein, we constructed a compact composite solid-state electrolyte with a three-dimensional continuous Li+ transport network by coupling a heat-treated polyacrylonitrile fiber network with an interconnected metal organic framework coating layer (h-PAN@MOF). The MOF crystal surface exhibits strong interactions with C 00000000 00000000 00000000 00000000 11111111 00000000 11111111 00000000 00000000 00000000 O of N,N-dimethylformamide (DMF), effectively weakening the Li+-O binding strength of DMF in the Li+ solvation structure. Highly-efficient Li+ transport channels and networks were constructed to achieve a high ionic conductivity of 1.03 x 10-3 S cm-1. The MOF-dependent Li+ coordination environment prompts the formation of a stable interphase. The h-PAN@MOF network also contributes to the high tensile strength (20.84 MPa) of the compact electrolyte. The Li||LiNi0.8Mn0.1Co0.1O2 full cells with the h-PAN@MOF network realize robust cycling for 1000 cycles at 5C. This work provides a facile strategy for regulating the Li+ coordination state and its spatial distribution in solid-state electrolytes for fast-charging solid-state Li metal batteries. The competitive Li+ coordination environment with a three-dimensional transport network is designed in a composite solid-state electrolyte to realize a high ionic conductivity of 1.03 x 10-3 S cm-1 and ultralong-cycling solid-state batteries at 5C.
Achieving multi-dimensional Li + transport nanochannels via spatial-partitioning in crystalline ionic covalent organic frameworks for highly stable lithium metal anode

Wenbo Wang,Yantao Zhang,Haichao Jiang,Ruijuan Zhang,Ning Wang,Yaying Dou,Zhiyi Zhao,Xue Yang,Xiaoyun Fan,Xiaodi Li,Xiaomeng Guo,Qingliang Feng,Shanlin Qiao

DOI: https://doi.org/10.1016/j.cej.2023.144888

IF: 15.1

2023-07-26

Chemical Engineering Journal

Abstract:The fragile solid electrolyte interphase (SEI) and anisotropic dendrite growth during Li plating/stripping have posed as intractable handicaps to the practical implementation of lithium metal batteries (LMBs). The Li + uniform distribution and unimpeded transfer play significant roles to enable protuberance-free Li textures. Herein, the highly-crystalline TFSI − ionic-covalent organic framework (I-COF) endowed with designated mixed-dimensional channels was constructed as an artificial SEI layer via anionic post-modification. Benefiting from the desirable spatial-partitioning effect triggered by nanochannels reconfiguration, the I-COF with expanded multi-dimensional Li + transport channels and scaled-down pore volume could effectively disperse the local concentration gradient of Li + flux and inhibit growth of Li dendrites. Besides, the coordinated TFSI − anions with a high t Li+ of 0.76 can selectively restrict the delivery and decomposition of homogeneous ions. To understand the interfacial charge transfer mechanisms, the lithophilic properties and the energy barriers for Li + migration were also calculated. Correspondingly, the I-COF(TI − ) modified Li|Li symmetric cell showed superb durability over 5500 h at 4 mA cm −2 with extraordinary overpotential. The Li|S full cell also displayed prolonged lifespan and excellent rate performance. The comprehension of the mixed-dimensional interfacial strategy via spatial-partitioning provides new insights into the fabrication of solid–solid interfaces, which can aid in the improved design and development of advanced lithium-metal batteries (LMBs).

engineering, chemical, environmental
Mesoscopic Framework Enables Facile Ionic Transport in Solid Electrolytes for Li Batteries

Cheng Ma,Yongqiang Cheng,Kai Chen,Juchuan Li,Bobby G. Sumpter,Ce-Wen Nan,Karren L. More,Nancy J. Dudney,Miaofang Chi

DOI: https://doi.org/10.1002/aenm.201600053

IF: 27.8

2016-01-01

Advanced Energy Materials

Abstract:Li‐ion‐conducting solid electrolytes can simultaneously overcome two grand challenges for Li‐ion batteries: the severe safety concerns that limit the large‐scale application and the poor electrolyte stability that forbids the use of high‐voltage cathodes. Nevertheless, the ionic conductivity of solid electrolytes is typically low, compromising the battery performances. Precisely determining the ionic transport mechanism(s) is a prerequisite for the rational design of highly conductive solid electrolytes. For decades, the research on this subject has primarily focused on the atomic and microscopic scales, where the main features of interest are unit cells and microstructures, respectively. Here, it is shown that the largely overlooked mesoscopic scale lying between these extremes could be the key to fast ionic conduction. In a prototype system, (Li0.33La0.56)TiO3, a mesoscopic framework is revealed for the first time by state‐of‐the‐art scanning transmission electron microscopy. Corroborated by theoretical calculations and impedance measurements, it is demonstrated that such a unique configuration maximizes the number of percolation directions and thus most effectively improves the ionic conductivity. This discovery reconciles the long‐standing structure–property inconsistency in (Li0.33La0.56)TiO3 and also identifies mesoscopic ordering as a promising general strategy for optimizing Li+ conduction.
[A preliminary study on placenta hematopoiesis].

F. Zeng,B. Shen,Hong Wang,Q. Shi,H. Hou,X. Ma

2000-06-01

Abstract:OBJECTIVE To study the role of placenta on fetal hematopoiesis during embryo ontogeny, so as to find a new source of hematopoietic stem/progenitor cells (HSC/HPC) for clinical transplantation. METHODS Cord blood was collected separately from cord vein and artery. CD(34)(+) cells were detected by FACS, CFU-GM semisolid agar culture, and hematopoietic growth factors (HGFs) by ELISA. The results of HE stain and CD(34) McAb immunohistochemistry stain of placenta chorionic villi were investigated. RESULTS The CFU-GM yields and the percentage of CD(34)(+) and CD(34)(+)/CD(38)(minus sign) cells in cord vein were higher than that in artery. The cord vein contained larger amount of hematopoietic stimulating factors and similar level of hematopoietic inhibitory factors as compared with that in artery. Blood island, reticular cells and scattered CD(34)(+) cells were found in the mesenchyme of placenta chorionic villi. CONCLUSION The placenta might be an another hematopoietic organ in ontogeny. It could be applied to clinical hematopoietic cell transplantation.
Effect of Sr and Nb co-doped on the total conductivity of Li0.5La0.5TiO3 ceramic electrolytes

qiyunwu qiyunwu,Deyi Zheng,Run yu Mao,Chang Liu

DOI: https://doi.org/10.1088/2053-1591/ad2cc6

IF: 2.025

2024-02-25

Materials Research Express

Abstract:The solid electrolyte Li0.5La0.5TiO3 is widely used in solid-state batteries due to its high grain conductivity at room temperature (RT). Researchers have often improved its huge grain boundary impedance by optimizing its crystal structure and doping it with suitable elements. Here, an Li0.5−y+xSrxLa0.5−xTi1−yNbyO3(LLSTN, x = 0, 0.04, 0.06, 0.08, and 0.1 mol%) ceramic solid electrolyte was prepared via the conventional solid-state reaction method. The introduction of Sr2+ and Nb5+ increases the lithium-ion content and transforms the Li3xLa2/3−xTiO3 (LLTO) crystal structure from tetragonal to cubic. The resultant LLSTN samples have a high conductivity and are characterized by the coexistence of the two phases. On the other hand, the lattice constant becomes larger, causing the migration channel of the lithium ions to become larger. At the same time, the introduction of Nb5+ increases the concentration of lithium vacancies, which facilitates the transport of the lithium ions. With increasing doping amount, lithium lanthanum niobate is formed between the the crystals grains, which inhibits grain growth. The presence of lithium lanthanum niobate, which is an ionic conductor, at the grain boundaries, effectively decreases the LLTO grain boundary impedance. The conductivity of sample Li0.5La0.42Sr0.08Ti0.92Nb0.08O3 reaches 5.10×10−5S·cm−1 at RT, which is about six times higher than that of the undoped sample, and the activation energy is 0.28 eV.

materials science, multidisciplinary
Aldosterone, sodium, and hypertension: lessons from torcetrapib?

J. Funder

DOI: https://doi.org/10.1161/HYPERTENSIONAHA.109.146936

IF: 9.8968

2010-02-01

Hypertension

Abstract:On epidemiological grounds, inhibition of cholesterol ester transport protein (CETP), and, thus, blockade of transfer of cholesterol esters from high-density lipoprotein (“good cholesterol”) to other lipoproteins, represents a promising target in the prevention and treatment of atherosclerosis.1,2 The first large trial to test this hypothesis was the Investigation of Lipid Level Management to Understand Its Impact in Atherosclerotic Events (ILLUMINATE) Trial, a major phase 3 secondary prevention morbidity and mortality trial in >15 000 subjects. ILLUMINATE compared the CETP inhibitor torcetrapib plus atorvastatin with atorvastatin alone. In an unanticipated outcome, the trial was terminated in December 2006 in the light of higher all-cause (cardiovascular and noncardiovascular) mortality in the torcetrapib arm.3 Three years later, the reasons for this increase in mortality remain uncertain. In addition to its undisputed effect on plasma lipoproteins, torcetrapib has been shown to raise blood pressure in humans4 and in rodents that lack CETP.5 In the ILLUMINATE Trial, subjects receiving torcetrapib showed highly significant increases in blood pressure (systolic: 4.0 mm Hg; diastolic: 2.0 mm Hg) after 3 months, as well as small but highly significant ( P <0.001) elevations in serum [Na+] (0.58 milliequivalents/L) and [HCO3−] (0.27 milliequivalents/L) in the torcetrapib arm, and a decrease (0.14 milliequivalents/L) in serum [K+]. Similar blood pressure and electrolyte changes have been consistently reported in additional clinical trials of torcetrapib.6–10 Consistent with these blood pressure and electrolyte changes, which were maintained at the 12-month point, post hoc analysis of plasma samples from the ILLUMINATE Trial showed similarly small but significant increases in plasma aldosterone levels in the torcetrapib arm. In a cohort the …
Competitive Li-ion Coordination Constructing Three-Dimensional Transport Network for Ultra-High Ionic Conductivity of Composite Solid-State Electrolyte

Yiteng Ma,Yong Qiu,Ke Yang,Shun Lv,Yuhang Li,Xufei An,Guanyou Xiao,Zhuo Han,Yuetao Ma,Likun Chen,Danfeng Zhang,Wei Lv,Yun Tian,Tingzheng Hou,Ming Liu,Zhen Zhou,Feiyu Kang,Yanbing He

DOI: https://doi.org/10.1039/d4ee03134b

IF: 32.5

2024-09-22

Energy & Environmental Science

Abstract:The porous structure of poly(vinylidene fluoride) (PVDF)-based polymer electrolytes and their disordered ion transport properties restrict the continuous and highly efficient transport of lithium ion (Li+), which exists as the major challenge to further improve the ionic conductivity. Herein, we construct a compact composite solid-state electrolyte with a three-dimensional continuous Li+ transport network by coupling heat-treated polyacrylonitrile fiber network with interconnected metal organic framework coating layer (h-PAN@MOF). The MOF crystal surface exhibits strong interactions with C=O of N,N-dimethylformamide (DMF), which effectively weakens the Li+-O binding strength of DMF in Li+ solvation structure. Highly efficient Li+ transport channels and networks are constructed to achieve a high ionic conductivity of 1.03×10–3 S cm–1. The MOF-participated Li+ coordination environment prompts the formation of a stable interphase. The h-PAN@MOF network also contributes to a high tensile strength (20.84 MPa) of the compact electrolyte. The Li||LiNi0.8Mn0.1Co0.1O2 full cells with h-PAN@MOF network realize robust cycling for 1000 times at 5C. This work provides a facile strategy of regulating the Li+ coordination state and its spatial distribution in solid-state electrolytes for fast-charging solid-state Li metal batteries.

energy & fuels,chemistry, multidisciplinary,engineering, chemical,environmental sciences
Amorphous Dual‐Layer Coating: Enabling High Li‐Ion Conductivity of Non‐Sintered Garnet‐Type Solid Electrolyte

Yuan Gao,Shuyang Sun,Xin Zhang,Yongfeng Liu,Jianjiang Hu,Zhenguo Huang,Mingxia Gao,Hongge Pan

DOI: https://doi.org/10.1002/adfm.202009692

IF: 19

2021-01-27

Advanced Functional Materials

Abstract:Garnet‐type oxide Li6.4La3Zr1.4Ta0.6O12 (LLZTO) has attracted considerable attention as a highly promising solid state electrolyte. However, its high ionic conductivity is achievable only after high temperature sintering (≈1200 °C) to form dense pellets but with detrimental brittleness and poor contact with electrodes. Herein, a novel strategy to achieve high Li+ ion conductivity of LLZTO without sintering is demonstrated. This is realized by ball milling LLZTO together with LiBH4, which results in a LLZTO composite with unique amorphous dual coating: LiBO2 as the inner layer and LiBH4 as the outer layer. After cold pressing the LLZTO composite powders under 300 MPa to form electrolyte pellets, a high Li+ ion conductivity of 8.02 × 10–5 S cm–1 is obtained at 30 °C, which is four orders of magnitude higher than that of the non‐sintered pristine LLZTO pellets (4.17 × 10–9 S cm–1). The composite electrolyte displays an ultrahigh Li+ transference number of 0.9999 and enables symmetric Li–Li cells to be cycled for 1000 h at 60 °C and 300 h at 30 °C. The significant improvements are attributed to the continuous ionic conductive network among LLZTO particles facilitated by LiBH4 that is chemically compatible and electrochemically stable with Li metal electrode.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology

Why do quality and reliability feedback loops not always work in practice: a case study

Oriented Crystal Growth of Li 0.33 La 0.557 TiO 3 Nanowire Induced by One-Dimensional Polymer Sheath toward Rapid Lithium-Ion Transfer

Preparing Two-Dimensional Ordered Li0.33 La0.557 TiO3 Crystal in Interlayer Channel of Thin Laminar Inorganic Solid-State Electrolyte towards Ultrafast Li+ Transfer

Oriented Crystal Growth of La 0.557 Li 0.330 TiO 3 in Bulk Ceramics Induced by LaAlO 3 Single-Crystal Fibers

Improved Li-ion Diffusion and Stability of a LiNi0.5Mn1.5O4 Cathode Through in Situ Co-Doping with Dual-Metal Cations and Incorporation of a Superionic Conductor

Microscopic Origin of the Ionic Transport Behaviors in Solid Electrolytes for Li Batteries

Anomalous High Ionic Conductivity of Nanoporous Β-Li3ps4

Lithium Lanthanum Titanate Single Crystals: Dependence of Lithium-Ion Conductivity on Crystal Domain Orientation.

Open-Structured Nanotubes with Three-Dimensional Ion-Accessible Pathways for Enhanced Li + Conductivity in Composite Solid Electrolytes

Self-organized hetero-nanodomains actuating super Li+ conduction in glass ceramics

Utilizing fast ion conductor for single-crystal Ni-rich cathodes to achieve dual-functional modification of conductor network constructing and near-surface doping

In Situ Constructing Robust and Highly Conductive Solid Electrolyte with Tailored Interfacial Chemistry for Durable Li Metal Batteries

Flux Synthesis of A‐site Disordered Perovskite La0.5M0.5TiO3 (M═Li, Na, K) Nanorods Tailored for Solid Composite Electrolytes

Competitive Li-ion Coordination for Constructing a Three-Dimensional Transport Network to Achieve Ultra-High Ionic Conductivity of a Composite Solid-State Electrolyte

Achieving multi-dimensional Li + transport nanochannels via spatial-partitioning in crystalline ionic covalent organic frameworks for highly stable lithium metal anode

Mesoscopic Framework Enables Facile Ionic Transport in Solid Electrolytes for Li Batteries

[A preliminary study on placenta hematopoiesis].

Effect of Sr and Nb co-doped on the total conductivity of Li0.5La0.5TiO3 ceramic electrolytes

Aldosterone, sodium, and hypertension: lessons from torcetrapib?

Competitive Li-ion Coordination Constructing Three-Dimensional Transport Network for Ultra-High Ionic Conductivity of Composite Solid-State Electrolyte

Amorphous Dual‐Layer Coating: Enabling High Li‐Ion Conductivity of Non‐Sintered Garnet‐Type Solid Electrolyte