[Studies of human intestinal parasitism at Compodimele (Latina province)].

M. Ricci,A. Sabatini,P. Fatima

1968-06-01

Abstract:

What problem does this paper attempt to address?

A novel sustainable phosphorus-containing heteroatom-based coating for polyamide 6.6 textiles: Enhanced flame retardancy and hydrophilicity

Mohammad Ziaur Rahman,Xin Wang,Lei Song,Yuan Hu

DOI: https://doi.org/10.1016/j.indcrop.2023.117425

IF: 6.449

2023-09-10

Industrial Crops and Products

Abstract:The demand for "green" materials increases due to concerns about the effects of flame-retardant textiles. Using natural plant-base compounds such as phytic acid (PA) and the most abundant green amino polysaccharide chitosan (CS) as effective and durable flame retardants for textiles is essential for creating sustainable and ecological textile products . This study aims to develop a novel, eco-friendly, phosphorus- and nitrogen-containing flame retardant known as ammonium phytate (AP), intending to improve the flame retardant properties of polyamide 6.6 (PA6.6) textiles. UV-induced grafting with 2-acrylamide-2-methylpropane sulfonic acid (AMPS) increases the surface functional groups of PA6.6 fabrics. Later, the surface-modified fabrics were coated with phosphorus-containing heteroatom-based components, namely, sulfur, nitrogen, silicon, and boron, onto a single flame retardant system via layer-by-layer (LBL) deposition of positively charged chitosan/boron drop (3-aminopropyl) triethoxysilane/silicon dioxide (CS/BAPTES/SiO 2 ) sole solution and negatively charged AP solution to enhance superior hydrophilic and durable flame retardant performance. According to the data, a weight pick-up of 56.5% is attributable to only 4 BLs. However, all the flame-retardant-coated fabrics can completely stop the melting-dripping tendency and achieve B-3 to B-2 ratings after the UL-94 vertical burning test. In addition, the LOI values of treated fabrics increase from 18.5% to 23.5% compared to a pure sample. The AMPS grafted with a 4BL-deposited fabric sample exhibits a maximum decrease in peak heat release rate (PHRR) of more than 54%. Moreover, the thermogravimetric analysis (TGA) test reveals a significant increase in thermal stability and char yield. Additionally, the as-prepared phosphorus-containing heteroatom-based coatings impart a water contact angle value of approximately 00 within 2 s, demonstrating that the treated fabrics exhibit superior hydrophilic performance. Moreover, using AMPS-grafted and only 2-BL-deposited treatments improves coating stability in washing and imparts durable flame retardancy that can resist up to 20 washing cycles. It is proposed that the sustainable phosphorus-containing heteroatom-based coating may be a potentially effective replacement for existing durable flame retardants routinely used in textile finishing operations.

agronomy,agricultural engineering
Bio-inspired and dual interaction-based layer-by-layer assembled coatings for superior flame retardancy and hydrophilicity of polyamide 6.6 textiles

Mohammad Ziaur Rahman,Chanchal Kumar Kundu,Xin Wang,Lei Song,Yuan Hu

DOI: https://doi.org/10.1016/j.eurpolymj.2021.110320

IF: 6

2021-03-01

European Polymer Journal

Abstract:A dual interaction-based (i.e., ionic/covalent) deposition of carbohydrate polymers, namely chitosan (CS) and oxidized sodium alginate (OSA) along with a plant-derived phosphorus-rich compound like phytic acid (PA) and a nitrogen rich compound like melamine (ME) was considered onto the phosphorylated chitosan (PCS) modified polyamide 6.6 (PA6.6) fabric surfaces in order to impart durable flame retardancy along with super-hydrophilicity of the same. Firstly, the pure PA6.6 textile surfaces were modified by PCS via UV-induced grafting and subsequently, the above-mentioned polyelectrolytes were assembled onto the fabric surfaces in a quadralayer fashion [i.e., (CS/ME-OSA-CS/ME-PA) n; "n" represents the number of quadralayers (QLs)]. Here, the amino groups of CS/ME and the aldehyde groups of the OSA were stabilized via covalent interaction and the deposition of positively charged CS/ME and negatively charged phytic acid (PA) formed ionic interaction. In the vertical burning (UL-94) test, both the only PCS grafted and the simultaneously PCS-grafted along with LbL assembled fabrics could completely stop the melt dripping tendency and attained a V-1 rating. In the meantime, the limiting oxygen index (LOI) value received a moderate increase from 18.5 % of pure PA6.6 to 23.5% for the PCS grafted and 8-QLs deposited fabric sample (i.e., PA6.6-g-PCS-8QL). Moreover, the PA6.6-g-PCS-8QL fabric sample exhibited a dramatic decrease in the peak heat release rate (pHRR) and total heat release (THR) by about 45 % and 24.7% respectively alongside enhanced thermal stability. Apart from the appreciable flame retardancy, this fabric sample (i.e., PA6.6-g-PCS-8QL) could boost up the hydrophilicity to attain a water contact angle of 0o. Finally, this dual interaction-based deposition of bio-inspired polyelectrolytes posed a positive impact in enhancing the coating stability in laundering and imparting durable flame retardancy to sustain even up to 20 laundering cycles.

polymer science
Hybrid Coatings for Durable Flame Retardant and Hydrophilic Treatment of Polyamide 6.6 Fabrics

Mohammad Ziaur Rahman,Chanchal Kumar Kundu,Hafezeh Nabipour,Xin Wang,Lei Song,Yuan Hu

DOI: https://doi.org/10.1016/j.porgcoat.2020.105640

IF: 6.6

2020-01-01

Progress in Organic Coatings

Abstract:The layer by layer (LBL) deposition of chitosan/melamine/urea (CS/ME/UREA) and phytic acid (PA) onto the acrylic acid (AA) grafted Polyamide 6.6 (PA6.6) fabrics including a pad-dry-cure treatment with chitosan/graphene oxide (CS/GO) nanocomposites were considered to improve the hydrophilicity and durable flame retardancy. Obtained results indicated that these hybrid coatings could significantly improve the flame retardancy as the limiting oxygen index (LOI) value reached up to 25 % from 18.5 % and could completely stop the melt dripping where the fabric sample with two bilayers deposition and simultaneously treated with CS/GO nanocomposite (PA6.6-g-AA-2BL-CS/GO) achieved a V-1 rating. A 2BLs deposited hybrid coating (i.e., PA6.6-g-AA-2BL-CS/GO) could decrease the peak heat release rate (pHRR) by 47.1 %; whereas a maximum reduction of pHRR by about 56 % was achieved for 5BLs deposition. Moreover, a considerable improvement in thermal stability and char yield% were also realized in the thermogravimetric analysis (TGA) test. Furthermore, the as-prepared hybrid coatings imparted better hydrophilicity as a 2BLs deposition along with pad-dry-cure treatment by CS/GO could boost up the hydrophilicity of the treated fabrics further compared to the only 2BLs deposited fabric sample. In addition, the application of CS/GO nanocomposite could improve the stability of this coating and able to stop the dripping tendency even after 10 laundering cycles as well.
Improving the hygroscopicity and flame retardancy of polyamide 6 fabrics by surface coating with β-FeOOH and sulfamic acid

Jian Liu,Peng Qi,Feng Chen,Xiaobei Li,Jingfan Zhang,Lijun Qian,Xiaoyu Gu,Jun Sun,Sheng Zhang

DOI: https://doi.org/10.1016/j.chemosphere.2023.139115

IF: 8.8

Chemosphere

Abstract:The combustion of polyamide 6 (PA6) fabrics releases toxic smoke, which will pollute the environment and threaten human life and health. Herein, a novel eco-friendly flame-retardant coating was constructed and applied to PA6 fabrics. Needle-like β-FeOOH with a high surface area was firstly constructed onto the surface of PA6 fabrics by the hydrolysis of Fe3+, sulfamic acid (SA) was then introduced by a facile dipping and nipping method. The growth of β-FeOOH also endowed the PA6 fabrics with certain hydrophilicity and moisture permeability, resulting in improved comfortability. The limiting oxygen index (LOI) of the prepared PA6/Fe/6SA sample was increased to 27.2% from 18.5% of control PA6 sample, and the damaged length was reduced to only 6.0 cm from 12.0 cm of control PA6 sample. Meanwhile, the melt dripping was also eliminated. The heat release rate and total heat release values of the PA6/Fe/6SA sample were decreased to 318.5 kW/m2 and 17.0 MJ/m2, respectively, compared with those of control PA6 (494.7 kW/m2 and 21.4 MJ/m2). The analysis results indicated that nonflammable gases diluted flammable gases. The observation of char residues demonstrated that the stable char layer was formed, which effectively inhibited the transfer of heat and oxygen. The organic solvent-free coating does not contain any conventional halogens/phosphorus elements, which provides a useful methodology to produce environmentally friendly flame-retardant fabrics.
Few Layer Deposition and Sol-Gel Finishing of Organic-Inorganic Compounds for Improved Flame Retardant and Hydrophilic Properties of Polyamide 66 Textiles: A Hybrid Approach

Chanchal Kumar Kundu,Xin Wang,Longxiang Liu,Lei Song,Yuan Hu

DOI: https://doi.org/10.1016/j.porgcoat.2019.01.010

IF: 6.6

2019-01-01

Progress in Organic Coatings

Abstract:A hybrid methodology, including a few layer deposition of bio-based polyelectrolytes, chitosan (CS) and phytic acid (PA), along with a sol-gel treatment from (3-Aminopropyl) triethoxysilane (APTES) and boron doped APTES sol solutions, was followed in constructing a flame retardant and hydrophilic coating onto polyamide 66 (PA66) fabric surfaces. Layer by layer (LbL) assembled and simultaneously sol-gel treated PA66 fabric samples (i.e., PA66-5BL-APTES and PA66-5BL-B-d-APTES) could be able to stop the melt-dripping in vertical burning test. The boron doped APTES sol treated fabric samples with a 2-5 bi-layers deposition showed a reduced peak heat release rate (pHRR) (i.e., 22-30 % reduction) in cone calorimetry test and revealed improved thermal stability in thermogravimetric analysis test. More interestingly, the boron doped silica sol could boost up the hydrophilicity of the treated fabrics significantly compared to only LbL and simultaneously LbL deposited and silica sol treated fabric samples. Furthermore, only the 5 bi-layers deposited and concurrently sol-gel treated fabric samples exhibited durable flame retardant behavior after laundering.
Microwave-initiated modification of polyamide 6.6 fabric surfaces for superior hydrophilic and flame retardant properties

Mohammad Ziaur Rahman,Chanchal Kumar Kundu,Xin Wang,Hafezeh Nabipour,Lei Song,Yuan Hu

DOI: https://doi.org/10.1016/j.polymdegradstab.2022.110128

IF: 5.204

2022-11-01

Polymer Degradation and Stability

Abstract:Microwave-assisted surface modification of polyamide 6.6 (PA6.6) fabrics was carried out in a grafting polymerization technique in the presence of acrylic acid (AA) monomer with an aim to enhance the extent of surface functional groups onto the PA6.6 fabric surfaces. In the next step, the surface modified fabric substrate was gone through a layer by layer (LbL) deposition process in the presence of some hybrid (organic/inorganic) polyelectrolytes in imparting hydrophylic and flame retardant properties and finally, the as prepared coating was subjected to a cross-linking treatment aided by hypo-phosphorus acid (HP) in enhancing the stability of the same. From the obtained results, it was revealed that the simultaneous microwave assisted grafting, LbL deposition and HP cross-linking left positive impacts in improving the flame retardant performance and hydrophilicity of PA6.6 fabrics along with the enhancement of coating stability in laundering. For example, acrylic acid grafted PA6.6 fabric sample with a 5-BL deposition and cross-linked with HP (i.e., PA6.6-g-AA-5BL-HP) attained a limiting oxygen index (LOI) value up to 23.5%, while exhibiting a significant level of reduction in the peak heat release rate (pHRR) by ca. 50 %. In line, a super-hydrophilic surface was obtained for this fabric sample as the water contact angle value declined to 0o. Furthermore, such kind of surface modification displayed a considerable level of coating stability during laundering as the anti-dripping properties still exist even after 10 home launderings.

polymer science
A novel green phosphorus-containing flame retardant finishing on polysaccharide-modified polyamide 66 fabric for improving hydrophilicity and durability

Mohammad Ziaur Rahman,Xin Wang,Lei Song,Yuan Hu

DOI: https://doi.org/10.1016/j.ijbiomac.2023.124252

IF: 8.2

2023-04-15

International Journal of Biological Macromolecules

Abstract:Rising concerns about the toxic effects and environmental issues associated with various fireproof treatments on textiles have led to a demand for "green" materials. Chitosan (CS) is an amino polysaccharide green, recyclable, and non-toxic highly biocompatible biopolymer that consists of multiple hydroxyl groups and has a wide range of applications, including as a flame retardant additive. In this study, an eco-friendly bio-based formaldehyde-free flame retardant containing a higher level of phosphorus and nitrogen in phytic acid ammonia (PAA) was synthesized to amplify the most plentiful green chitosan (CS)-modified polyamide 66 (PA66) fabric surface through a simple pad-dry-cure technique for the improvement of durable flame retardancy with hydrophilicity. The findings revealed that each UV-grafted CS fabric could entirely stop the melt-dripping tendency during the vertical burning (UL-94) test and reached a V -1 rating. Meanwhile, limiting oxygen index (LOI) testing showed a rapid increase from 18.5 % to 24 % for the PA66 control and the PAA-treated (i.e., PA66-g-5CS-PAA) fabric samples, respectively. Moreover, compared to the PA66 control sample, a dramatic decrease in the peak heat release rate (PHRR), fire growth rate (FGR), and total heat release (THR) by approximately over 52 %, 0.63 %, and 19.7 %, respectively, was observed for the PA66-g-5CS-PAA fabric sample. Additionally, this arrangement of PAA catalyzed the charring of grafted CS and acted as a condensed phase flame retardant, resulting in a significant improvement in char yield% in both air and N 2 atmospheres for the PA66-g-5CS-PAA fabric sample in TGA. In addition, only the lower grafting ratio of CS with PAA-treated fabric sample (i.e., PA66-g-2CS-PAA) could encourage it to gain its lowest water contact angle of 0 0 , as well as impersonating a positive effect in improving the flame retardant coating durability in washing and sustaining even after 10 home laundering cycles. This phenomenon suggests that an actual hydrophilic and durable flame retardant finishing procedure for polyamide 66 fabrics might be applied with the novel, plentiful, sustainable, and environmentally friendly bio-based green PAA ingredient.

polymer science,biochemistry & molecular biology,chemistry, applied
A bio-based flame retardant coating for improving flame retardancy and anti-dripping performance of polyamide 6 fabric

Wen-Jie Jin,Xian-Wei Cheng,Wei-Lin He,Liang Gu,Jin-Ping Guan,Wen-Jie Jin,Xian-Wei Cheng,Wei-Lin He,Liang Gu,Jin-Ping Guan

DOI: https://doi.org/10.1016/j.polymdegradstab.2022.110087

IF: 5.204

2022-09-01

Polymer Degradation and Stability

Abstract:Eco-friendly and sustainable flame retardant (FR) approaches derived from natural products for polyamide 6 (PA6) fabrics are of interest. Therefore, a novel biomass phytate taurine salt (PTS) was synthesized using phytic acid and taurine, and then it was coated onto PA6 fabric. The chemical structure of PTS, and the flame retardant performance and mechanism, the washing durability and physical properties of coated PA6 fabrics were explored. The damaged length of coated PA6 fabrics reduced to 12.0 cm without droplets during the vertical burning test, achieving a UL94 V-0 level. The LOI increased from 23.0% to 31.8% after PTS coating. The results of cone calorimetry showed that the pHRR of PA6-PTS sample decreased by about 11.0% with a char residue of 12.0%. The investigations on violates and char residues confirmed that PTS coating improved the flame retardancy of PA6 fabric through a combined gas-phase and condensed-phase action. In addition, the coated PA6 fabrics could still maintain V-0 level after 15 washing cycles. The tensile strength of PA6 fabrics was also slightly improved after PTS coating. In general, this work developed a durable and sustainable PTS coating with excellent flame retardancy for PA6 fabric.

polymer science
An eco-friendly and intumescent P/N/S-containing flame retardant coating for polyamide 6 fabric

Wen-Jie Jin,Wei-Lin He,Liang Gu,Xian-Wei Cheng,Jin-Ping Guan

DOI: https://doi.org/10.1016/j.eurpolymj.2022.111610

IF: 6

2022-10-01

European Polymer Journal

Abstract:This study focused on the construction of an eco-friendly and intumescent flame retardant (FR) coating for polyamide 6 (PA6) fabric. The intumescent FR coating, consisting of phytic acid, pentaerythritol and thiourea, was deposited onto PA6 fabric through dip-coating technique. The FR performance, anti-dripping ability, thermal stability, combustion behavior and mechanical property of the coated PA6 fabrics were explored. The severe dripping of coated PA6 fabric was totally eliminated, achieving an excellent FR performance at a low P (2.2%) and S (3.4%) content. Correspondingly, the LOI increased to 28.8% versus 23.2% of pristine one, displaying good flame retardancy. The char residue analyses confirmed the intumescent FR behavior of coated PA6 fabrics. The intumescent char layer played a major role in isolating the exchange of combustibles, oxygen and heat, leading to the significant reduction in heat release performance. The results of cone calorimetry test showed that the peak heat release rate and average effective heat of combustion of coated PA6 fabric decreased by about 36.5% and 34.4%, respectively versus pristine one. Meanwhile, the sulfur-based gases captured free radicals to interrupt the continuous combustion, leading to the significantly improved flame retardancy. Furthermore, the FR coating exerted little influence on the mechanical performance of PA6 fabric.

polymer science
Nanoparticles Based Coatings for Multifunctional Polyamide 66 Textiles with Improved Flame Retardancy and Hydrophilicity

Chanchal Kumar Kundu,Lei Song,Yuan Hu

DOI: https://doi.org/10.1016/j.jtice.2020.07.013

IF: 5.477

2020-01-01

Journal of the Taiwan Institute of Chemical Engineers

Abstract:Novel nanoparticles (NPs) namely, TiO2 and SiO2 along with naturally derived phytic acid (PA) and chitosan (CS) were used to improve the flame retardant and hydrophilic properties of polyamide 66 (PA66) fabrics via pad-dry-cure technique. The application of PA-TiO2 enhanced the limiting oxygen index (LOI) value up to 24.5 % for the treated fabrics from 19.5% of the pure fabric and accelerated char yield%. Conversely, the introduction of chitosan (CS) into the PA-TiO2/SiO2 formulations brought a significant reduction in the peak heat release rate (pHRR) where a maximum reduction of 25 % was achieved for the PA66-PA-CS-T fabric sample. Meanwhile, the hydrophilicity of treated fabrics was improved significantly, especially with PA-SiO2 formulation as the water contact angle was reduced to 29 degrees for the treated fabrics from 112 degrees for the pure PA66. In addition, the formulations containing nanoparticles (TiO2/SiO2) along with PA boosted up the tensile strength of treated textiles. (C) 2020 Taiwan Institute of Chemical Engineers. Published by Elsevier B.V. All rights reserved.
Borate Cross-Linked Layer-by-layer Assembly of Green Polyelectrolytes on Polyamide 66 Fabrics for Flame-Retardant Treatment

Chanchal K. Kundu,Xin Wang,Lei Song,Yuan Hu

DOI: https://doi.org/10.1016/j.porgcoat.2018.04.031

IF: 6.6

2018-01-01

Progress in Organic Coatings

Abstract:Borate cross-linked thin coatings made from green polyelectrolytes, chitosan (CS) and phytic acid (PA), were deposited on polyamide 66 (PA66) fabrics via layer-by-layer (LbL) assembly to develop a durable flame retardant method. The surface and morphological characterization showed that CS and PA were successfully deposited onto the PA66 fabrics and cross-linked by borate. The presence of the coating slightly changed the limiting oxygen index (LOD values, but suppressed flame spread and completely stopped melt-dripping of PA66 in UL 94 vertical burning test. The CS-PA coating also decreased the peak heat release rate of PA66 observed in cone calorimeter tests, and a maximum reduction of 31% was observed for PA66-10BL fabric sample. The addition of CS, PA and borate moieties lowered the initial decomposition temperature of PA66, but the char yield and char quality were improved. Especially, the char of the PA66 fabrics treated by borate exhibited better thermal resistance in thermogravimetric analysis (TGA) tests. More importantly, it was noticed that the stability of deposited CS-PA coating in sodium dodecyl sulfate (SDS) solution was enhanced significantly after cross-linking by borate, which would be favourable to durable flame-retardant treatment.
An environmentally-friendly sandwich-like structured nanocoating system for wash durable, flame retardant, and hydrophobic cotton fabrics

Dongqiao Zhang,Brandon L. Williams,Jingjing Liu,Zaili Hou,Andrew T. Smith,Sunghyun Nam,Zain Nasir,Harsh Patel,Anthony Partyka,Elaina M. Becher,Benjamin J. Lofink,Victor H. Santos,Xiaohong Peng,Luyi Sun

DOI: https://doi.org/10.1007/s10570-021-04177-y

IF: 6.123

2021-09-06

Cellulose

Abstract:Surface modification is a main approach for natural polymers to gain flame retardancy. Developing a green coating system to endow natural polymers with flame retardancy and wash-durability is extremely challenging. Herein, a sandwich-like structured nanocoating system with mutual restricted network through electrostatic interaction, hydrogen bonding, and chemical bonding were designed via multi-layered coating and UV curing. The coated natural cotton fabrics demonstrated exellent flame retardancy, wash durability, and hydrophobicity. The chemicals involved include montmorillonite (MMT), ammonium polyphosphate (APP), acrylated polyurethane (PU), branched polyethylenimine (bPEI), and polydimethylsiloxane (PDMS). The concentration of bPEI governed the wash durability of the coated fabrics, and those samples with a higher concentration of bPEI possessed better wash durability. Meanwhile, bPEI served as a flammable resource to deteriorate the flame retardant performance. The systematic evaluations of the coated fabrics after washing demonstrated that this coating system can maintain balanced wash durability and flame retardancy.Graphic abstract

materials science, textiles,polymer science, paper & wood
Fully bio-based coating for nylon/cotton blend fabrics with improved flame retardancy and smoke suppression properties

Jian Liu,Peng Qi,Feng Chen,Jingfan Zhang,Hongfei Li,Xiaoyu Gu,Jun Sun,Sheng Zhang

DOI: https://doi.org/10.1016/j.porgcoat.2023.107884

IF: 6.6

2023-08-19

Progress in Organic Coatings

Abstract:With the increasing requirements of eco-friendly flame retardant fabrics, fully bio-based flame retardants have attracted more and more attention. In this work, a fully bio-based flame retardant coating (PALC) was prepared by combining phytic acid and L-cysteine through ion exchange, which was then applied to nylon-cotton blends. The water contact angle (WCA) test indicates that the hydrophilicity of treated blend fabrics is significantly increased. The treated blend fabrics also exhibited excellent antibacterial property against E. coli and S. aureus . Besides, the limiting oxygen index (LOI) value of the treated blend fabric is increased to 27.2 % from 19.3 %, and the damage length is reduced to 5 cm from 30 cm. The analysis of cone calorimetry test results demonstrates that the total heat release (THR) and peak heat release rate (pHRR) values of the treated blend fabric are reduced by 62.6 % and 65.4 %, respectively, relative to CO/NY. At the same time, the PALC coating can also endow the blend fabric with smoke suppression properties. The total smoke production (TSP) and smoke production rate (SPR) values are reduced by 64.5 % and 67.6 %, respectively. The combination analysis of TG-FTIR, SEM and XPS proves that the phytic acid promotes the dense char layers forming, and L-cysteine generates non-combustible gases. This work provides an eco-friendly and organic solvent-free method for producing flame-retardant nylon/cotton blends with reduced smoke release.

materials science, coatings & films,chemistry, applied
Coordination driven layer‐by‐layer deposition technology used for fabrication of flame retardant polyamide 66 fabric

Wei Liu,Rui Shi,Zejiang Zhang,Mingqiang Yan,Xiaosui Chen,Yuyan Chen

DOI: https://doi.org/10.1002/pat.5335

IF: 3.348

2021-04-19

Polymers for Advanced Technologies

Abstract:Phytic acid (IP6) as the major phosphorus‐containing component of certain plants, such as cereal, oil plant, and bean possesses strong capability of coordinating with metal ion to form complex salt. In this study, low concentration IP6 was utilized in combination with Al3+ ion to in situ form insoluble Al3+‐IP6 complex salt on the surface of the fabric through coordination driven layer‐by‐layer deposition technology without high temperature cure step, which is an attempt to provide a facile bio‐based flame retardant finishing to polyamide (PA) 66 fabric. Surface structure of the treated PA fabric has been analyzed via ATR‐FTIR and SEM characterization. Effect of BLs' number on the flame retardancy and burning behavior of the treated sample has been examined by the limiting oxygen index (LOI) test, the vertical burning test, microcalorimetry, and thermogravimetric analysis. The results show that 20LBL PA fabric has the highest LOI value, highest residual char yield, and lowest THR value in all the samples and no melt dripping behavior could be detected during combustion of 20LBL PA fabric. Moreover, the insolubility of Al3+‐IP6 salt from the surface could promote the durability of the treated fabric after laundering procedure using water single. This is the first time to use coordination driven layer‐by‐layer deposition technology in the fabric's flame retardant finishing.

polymer science
Efficient, durable, and breathable flame retardant cotton fabric via a feasible surface finishing

Ziqiang Hu,Yanan Ma,Hao Chen,Lulin Wei,Guocheng Zhu,Lin Liu,Juming Yao

DOI: https://doi.org/10.1016/j.apsusc.2022.156314

IF: 6.7

2023-01-08

Applied Surface Science

Abstract:Flame retardant cotton fabric has attracted extensive attention and research with the increase of public safe awareness. However, it still remained a great challenge to balance the performances of high flame retardancy, durability, mechanical strength, as well as formaldehyde-free, comfort, green and feasible process. Herein, efficient, durable and breathable flame retardant cotton fabrics were fabricated through a one-pot approach based on a synergetic system combining phytic acid (PA) with polyethyleneimine (PEI) and 3-Glycidyloxypropyltrimethoxysilane (GPTMS). The modified cotton fabrics displayed high-efficiency fire resistance, self-extinguishing and excellent washing resistance due to the formation of surface hybrid network architectures from multiple covalent bonds (SiOC, CN, POC) and electrostatic assembly. The limiting oxygen index (LOI) could retain at 27.1% after 50 laundering cycles (LCs). Moreover, the peak of heat release rate (PHRR), total heat release (THR) and total smoke release (TSP) declined by 85.89%, 52.72% and 47.22% compared with neat fabric, indicating boosted flame retardance and excellent smoke suppression ability. In addition, the proposed surface finishing process substantially retained the mechanical properties and moisture permeability, providing a simple and feasible approach for high-efficiency, durable and breathable flame retardant cotton fabric.

chemistry, physical,physics, applied, condensed matter,materials science, coatings & films
Flame retardant and anti-dripping modification of polyamide 6 fabric by guanidine sulfamate with enhanced durability

Wen-Jie Jin,Xian-Wei Cheng,Wei-Lin He,Liang Gu,Shuo Li,Ya-Wen Gou,Jin-Ping Guan,Guoqiang Chen

DOI: https://doi.org/10.1016/j.tca.2021.179073

IF: 3.5

2021-12-01

Thermochimica Acta

Abstract:This study focused on durable flame retardant functionalization of polyamide 6 (PA6) fabric using guanidine sulfamate (GAS). The modified PA6 fabric self-extinguished during vertical burning test (ASTM D6413) without droplet; it had a low damaged length of 8.0 cm and a high LOI of 31.3 %, showing good flame retardancy. However, the modified PA6 fabric showed poor washing durability. An anionic thin film on fiber surface was fabricated using condensed tannin resin to improve the washing durability. The electrostatic repulsion action between thin film and GAS contributed to a good washing durability of the modified PA6 fabric, reflected by the self-extinguishing ability after 20 washing cycles. The formation of incombustible violates suggested by thermal stability analysis was beneficial to dilute combustible gases, leading to improved flame retardancy of PA6 through a gas-phase mechanism. This work offers a novel approach of developing durable flame retardant PA6 textile by combining GAS modification and anionic resin coating.

chemistry, physical, analytical,thermodynamics
Sustainable Flame-Retardant Flax Fabrics by Engineered Layer-by-Layer Surface Functionalization with Phytic Acid and Polyethylenimine

S Ehsanimehr,R Sonnier,M Badawi,F Ducos,N Kadi,M Skrifvars,M R Saeb,H Vahabi

DOI: https://doi.org/10.1007/s10694-023-01387-7

2023-03-28

Abstract:New generation of mission-oriented fabrics meets advanced requirements; such as electrical conductivity, flame retardancy, and anti-bacterial properties. However, sustainability concerns still are on-demand in fabrication of multi-functional fabrics. In this work, we used a bio-based phosphorus molecule (phytic acid, PA) to reinforce flax fabrics against flame via layer-by-layer consecutive surface modification. First, the flax fabric was treated with PA. Then, polyethylenimine (PEI) was localized above it to create negative charges, and finally PA was deposited as top-layer. Fourier-transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA), scanning electron microscopy (SEM), energy dispersive X-ray spectrometry (EDX), and inductively-coupled plasma atomic emission spectrometry (ICP-AES) proved successful chemical treatment. Pyrolysis-combustion flow calorimetry (PCFC) showed significant drop by about 77% in the peak of heat release rate (pHRR) from 215 W/g for untreated to 50 W/g for treated flax fabric. Likewise, the total heat release (THR) decreased by more than three times from 11 to 3.2 kJ/g. Mechanical behavior of the treated flax fabric was completely different from untreated flax fabrics, changing from almost highly-strengthened behavior with short elongation at break to a rubber-like behavior with significantly higher elongation at break. Surface friction resistance was also improved, such that the abrasion resistance of the modified fabrics increased up to 30,000 rub cycles without rupture. Supplementary information: The online version contains supplementary material available at 10.1007/s10694-023-01387-7.
Chitosan-based Flame Retardant Coatings for Polyamide 66 Textiles: One-pot Deposition Versus Layer-by-layer Assembly.

Chanchal Kumar Kundu,Xin Wang,Lei Song,Yuan Hu

DOI: https://doi.org/10.1016/j.ijbiomac.2019.11.220

IF: 8.2

2020-01-01

International Journal of Biological Macromolecules

Abstract:Chitosan (CS) and phosphorylated chitosan (PCS) were deposited onto the polyamide 66 (PA66) fabric surfaces along with poly-acrylate sodium (PAS) via ‘one pot’ and layer by layer (LbL) assembly methods in preparing flame retardant coatings. Subsequently, to stabilize the deposited coatings, some of the fabric samples were treated under the UV-irradiation and additionally, a thermal treatment was also carried out for the remaining fabric samples. The LbL assembled fabrics showed a better homogeneity in the coating structure over the one pot deposited fabrics as appeared in scanning electron microscopy (SEM). Nonetheless, the LbL treated fabric sample (i.e., PA66-10BL-UV) with a higher weight gain% exhibited a greater improvement in limiting oxygen index (LOI) (i.e., 23%), and a reduced peak heat release rate (pHRR) (i.e., 25%). Yet more, only the LbL assembled and thermally cross-linked fabric sample could able to retain the flame retardant behavior in the vertical burning test even after 5 washing cycles.
Flame retardant and hydrophilic coatings on undyed and dyed polyamide 6.6 textiles: Clarifying the processing and performance

Mohammad Ziaur Rahman,Chanchal Kumar Kundu,Hafezeh Nabipour,Xin Wang,Lei Song,Yuan Hu

DOI: https://doi.org/10.1016/j.porgcoat.2021.106600

IF: 6.6

2022-02-01

Progress in Organic Coatings

Abstract:This work was intended to clarify if the dyeing treatment could modify the functional properties of white substrate as well as the surface finishing would alter the initial color of dyed textiles. Thus, in this work, a kind of surface coating was applied to modify the flame retardant and hydrophilic properties of both the undyed (white) and dyed polyamide 6.6 (PA6.6) textiles using some novel compounds like chitosan (CS), montmorillonite (MMT), sodium alginate (ALG) and phytic acid (PA) in a quadralayer (QL) or a hexalayer (HL) fashion. The obtained results revealed that the dyed fabric samples exhibited better flame retardancy and hydrophilicity compared to the undyed one; indicating the dyeing treatment contributed in improving the functional properties. For example, the 5HL-deposited dyed fabric sample (i.e., PA6.6-D-5HL) showed a maximum reduction in the peak heat release rate (pHRR) by 32% and the 7.5QL-deposited dyed fabric sample (i.e., PA6.6-D-7.5QL) brought a water contact angle (WCA) value of 0°. However, this kind of surface finishing caused a slight loss in depth of color for the dyed fabric samples.

materials science, coatings & films,chemistry, applied
Facile fabrication of ultradurable flame-retardant and hydrophobic cotton fabric with P/N-rich maltodextrin derivative and octadecyltrimethoxysilane

Tao Mao,Suhui Xie,Jiang Tu,Hang Xiao,Peng Wang

DOI: https://doi.org/10.1016/j.ijbiomac.2024.135685

2024-09-14

Abstract:Flame-retardant and hydrophobic cotton fabric provides protections from fire, stain and bacteria in daily life. However, it is still a great challenge to achieve ultrahigh durability via a green and facile technology. Herein, we synthesized a reactive P/N-rich maltodextrin derivative (PM), and reported a facile dipping-baking strategy to fabricate ultradurable flame-retardant and hydrophobic cotton fabric with PM and octadecyltrimethoxysilane (OTMS). The acids released from PM not only reacted with cellulose during baking, but also catalyzed the hydrolysis-polycondensation of OTMS and silylation reaction of cellulose. Thanks to the P/N/Si synergy and the existence of polyalkylsiloxane coating, treated fabric exhibited outstanding flame retardancy and hydrophobicity with a limiting oxygen index (LOI) of 34.7% and a water contact angle (WCA) of 143.3°. The chemical crosslinkings in PM-cellulose and OTMS-cellulose imparted ultrahigh durability to treated fabric. The LOI and WCA of treated fabric still reached 27.2% and 127.9° after 50 harsh washing cycles, respectively. Moreover, the WCA still maintained above 125° after 3000 intense friction cycles or soaked in strongly acidic/alkaline solution for 3 days. This work not only provides a new idea to synthesize biobased reactive flame retardant, but also a feasible and sustainable strategy for fabricating ultradurable hydrophobic and flame-retardant cotton fabric.

[Studies of human intestinal parasitism at Compodimele (Latina province)].

A novel sustainable phosphorus-containing heteroatom-based coating for polyamide 6.6 textiles: Enhanced flame retardancy and hydrophilicity

Bio-inspired and dual interaction-based layer-by-layer assembled coatings for superior flame retardancy and hydrophilicity of polyamide 6.6 textiles

Hybrid Coatings for Durable Flame Retardant and Hydrophilic Treatment of Polyamide 6.6 Fabrics

Improving the hygroscopicity and flame retardancy of polyamide 6 fabrics by surface coating with β-FeOOH and sulfamic acid

Few Layer Deposition and Sol-Gel Finishing of Organic-Inorganic Compounds for Improved Flame Retardant and Hydrophilic Properties of Polyamide 66 Textiles: A Hybrid Approach

Microwave-initiated modification of polyamide 6.6 fabric surfaces for superior hydrophilic and flame retardant properties

A novel green phosphorus-containing flame retardant finishing on polysaccharide-modified polyamide 66 fabric for improving hydrophilicity and durability

A bio-based flame retardant coating for improving flame retardancy and anti-dripping performance of polyamide 6 fabric

An eco-friendly and intumescent P/N/S-containing flame retardant coating for polyamide 6 fabric

Nanoparticles Based Coatings for Multifunctional Polyamide 66 Textiles with Improved Flame Retardancy and Hydrophilicity

Borate Cross-Linked Layer-by-layer Assembly of Green Polyelectrolytes on Polyamide 66 Fabrics for Flame-Retardant Treatment

An environmentally-friendly sandwich-like structured nanocoating system for wash durable, flame retardant, and hydrophobic cotton fabrics

Fully bio-based coating for nylon/cotton blend fabrics with improved flame retardancy and smoke suppression properties

Coordination driven layer‐by‐layer deposition technology used for fabrication of flame retardant polyamide 66 fabric

Efficient, durable, and breathable flame retardant cotton fabric via a feasible surface finishing

Flame retardant and anti-dripping modification of polyamide 6 fabric by guanidine sulfamate with enhanced durability

Sustainable Flame-Retardant Flax Fabrics by Engineered Layer-by-Layer Surface Functionalization with Phytic Acid and Polyethylenimine

Chitosan-based Flame Retardant Coatings for Polyamide 66 Textiles: One-pot Deposition Versus Layer-by-layer Assembly.

Flame retardant and hydrophilic coatings on undyed and dyed polyamide 6.6 textiles: Clarifying the processing and performance

Facile fabrication of ultradurable flame-retardant and hydrophobic cotton fabric with P/N-rich maltodextrin derivative and octadecyltrimethoxysilane