Abstract:Background: Platinum (Pt), palladium (Pd), rhodium (Rh) and iridium (Ir) are platinum group elements (PGEs) and also important elements of geochemistry and environmental chemistry with the similar physic-chemical properties, which have been widely used in industry and laboratory. However, due to the low abundance and inhomogeneous distribution in natural ore as well as the nugget effect, the accurate determination of PGEs has been a challenge to analytical chemistry. Methods: In this work, a novel fire assay method was reported for the determination of ultra-trace Pt, Pd, Rh and Ir in geochemical samples. Tin powder (Sn) instead of stannic oxide (SnO 2 ) was used as a fire assay collector to reduce the melting temperature from 1250°C to 1050°C, the escape of molten material caused by high temperature was successfully avoided. Tin bead was compressed into thin slice and dissolved by HCl. For the target Pt, Pd, Rh and Ir, HCl insoluble substance such as PtSn 4 , PdSn 4 , RhSn 4 and Ir 3 Sn 7 were formed and separated from matrix by filtering. The metal compounds precipitate together with filter paper were microwave-assisted completely digested by aqua regia (50%, v/v), thence the sample solution was determined by inductively coupled plasma mass spectrometry (ICP-MS). Results: Compared with nickel oxide and lead oxide in nickel sulfide /lead fire assay, the reagent blank of tin powder were relatively low and could be directly employed in tin fire assay to collect Pt, Pd, Rh and Ir without purifying. Moreover, the harm of nickel oxide and lead oxide to the analyst and environment was avoided by using the non-toxic tin powder. The decomposition method of chromite and black shale was investigated as well as the amount of tin powder and flour, microwave digestion program for the determination of Pt, Pd, Rh and Ir were optimized. Besides, the influence of mass spectrum interference of co-existing elements was discussed and the standard mode and kinetic energy discrimination collision pool mode were compared. Under the optimal conditions, excellent curve fitting of Pt, Pd, Rh and Ir were obtained between 0.01~100 ng mL -1 , with the correlation coefficients exceeding 0.9996. The detection limits were from 0.003 ng g -1 to 0.057 ng g -1 . Conclusion: The developed method was applied to analyze the Chinese Certified Reference Materials and the determined values were in good agreement with the certified values.

The Effect of Complexity of a Matrix on Variation of Platinum Group Metal Determination Using ICP OES and Correction Method: A Spent Catalyst as a Case Study

Performance Parameters of Inductively Coupled Plasma Optical Emission Spectrometry and Graphite Furnace Atomic Absorption Spectrometry Techniques for Pd and Pt Determination in Automotive Catalysts

Development of Palladium Separation Process from Nitric Acid Medium Utilizing a New Hybrid Multi-Nitrogen Adsorbent

Recovery of platinum group elements from waste material

Simultaneous Determination of Ultra-trace Pt, Pd, Rh and Ir in Geochemical Samples by Inductively Coupled Plasma Mass Spectrometry Following Tin Fire Assay Preconcentration and Microwave Digestion

Single-Step Hydrometallurgical Method for the Platinum Group Metals Leaching from Commercial Spent Automotive Catalysts

A simple and accurate method for the determination of Rh, Pd, and Pt in e-waste and spent automotive catalysts using HR-CS FAAS for assessing the value of secondary raw materials

Recovery of platinum-group metals from spent catalysts by microwave smelting

Simultaneous Determination of Ultra-Trace Pt, Pd, Rh, and Ir in Gold Mining Residue by Inductively Coupled Plasma-Mass Spectrometry (ICP-MS) with an Antimony-Copper Fire Assay and Microwave Digestion

Determination of Ultra-Trace Platinum, Palladium, Ruthenium, Rhodium, and Iridium in Rocks and Minerals by Inductively Coupled–Plasma Mass Spectrometry Following Nickel Sulfide Fire Assay Preconcentration and Open Mixed Acid Digestion

Isotope dilution inductively coupled plasma time-of-flight mass spectrometry (ID-ICP-TOFMS) with desolvating sample introduction and He collision gas for high-accuracy determination of Rh, Pd and Pt in automobile catalytic converters

Efficient enrichment of platinum group metals from spent automotive catalysts by alkaline hydrothermal treatment and the subsequent acid leaching method

Simultaneous determination of traces of Pt, Pd, Os, Ir, Rh, Ag and Au metals by magnetic SPE ICP OES and in situ chemical vapour generation

Comparative efficacy of platinum group metal modifiers in electrothermal atomic absorption spectrometry

The analytical methods for determination of platinum group elements in geological samples.

Application ICP-OES to Multielement Analysis on Plastic Waste and Blends with Vacuum Gas Oil: Developing a Sample Preparation Protocol

Studies on the Formation of Catalytically Active PGM Nanoparticles from Model Solutions as a Basis for the Recycling of Spent Catalysts

High-value utilisation of PGM-containing residual oil: Recovery of inorganic acids, potassium, and PGMs using a zero-waste approach

Determination of Pd,Pt and Au by Microwave Plasma Torch Atomic Emission Spectrometry Using an On-line Clean-up

Metals smelting-collection method for recycling of platinum group metals from waste catalysts: A mini review

Green palladium and platinum recovery by microwave-assisted aluminum chloride solution