Bipolar lead system for the 1980s.

H. Mond,P. Kertes

DOI: https://doi.org/10.1111/J.1540-8159.1983.TB05314.X

1983-05-01

Abstract:

What problem does this paper attempt to address?

Prospective Comparison of Facial Soft Tissue Changes Using 2D Photographs and 3D Scanning After En Masse Dentoalveolar Maxillary Distalization Using Tads

Nida Fatima,Gurkeerat Singh,Nishant Gupta,Ritu Gupta,Raj Kumar Singh,Ankit Chaudhari

DOI: https://doi.org/10.3126/ojn.v12i1.47486

2022-08-15

Orthodontic Journal of Nepal

Abstract:Introduction: This prospective clinical study was undertaken to analyse the three-dimensional facial soft tissue changes after en-masse maxillary distalization using 3D structured light-based scanner and facial photographs and to compare the two diagnostic aids. Materials and Method: 12 Indian adult patients of 17- 23 years of age with unilateral or bilateral class II molar relationship and those indicated for en-masse distalization. A pre-operative and post-operative extra oral 3D scan and 2D photographs were obtained for each subject. A prospective comparative evaluation of 10 lateral and 20 frontal soft tissue parameters was done. Result: When pre to post comparison was made in different study parameters using paired t test, none of the study parameter showed significant difference. Conclusion: The laser facial scanning can be considered as a useful and reliable tool to analyze the circumoral region for orthodontic and orthognathic surgical diagnosis and treatment planning. The difference in facial soft tissue changes evaluated using 3D scans and 2D photographs was also not statistically significant.
A Perioral Soft Tissue evaluation after Orthognathic Surgery Using Three-Dimensional Computed Tomography Scan

Rahul Tiwari,P. Srinivas Chakravarthi,Vivekanand S. Kattimani,Krishna Prasad Lingamaneni

DOI: https://doi.org/10.2174/1874210601812010366

2018-04-30

The Open Dentistry Journal

Abstract:Background: Facial appearance is an important factor, affects social and psychological well-being. The ideal positioning of jaws and soft tissues is crucial during orthognathic surgery for a better outcome, but the response of facial soft tissues does not always reflect the exact movements of the underlying jaws in 1:1 ratio. So, soft tissue changes following orthognathic surgery require utmost attention during surgical correction to make successful treatment. Aims and Objectives: Evaluation of perioral soft tissue changes after orthognathic surgical procedures. The objectives of the study were to assess and compare pre and post-operative perioral soft tissue changes of lip width, nasolabial and mentolabial angle using Three Dimensional Computed Tomography scan (3DCT). Patient and Methods: The study involved ten patients for evaluation requiring orthognathic surgical procedures (maxillary or mandibular anteroposterior excess or deficiency, transverse deformities, vertical maxillary excess and facial asymmetry) presented to the department of oral and maxillofacial surgery during 2014-2016. Pre and post-operative 3DCT scan were taken after 12 months using iCT 256 slice whole body CT scanner and evaluated for changes using Dicom PMS D view. Results: Significant changes were observed in nasolabial angle after maxillary advancement (1.81°) and maxillary setback procedure (2.73°). The mentolabial angle was significantly increased with mandibular setback procedures (3.27°). Mandibular advancement procedures showed both increase (3.6°) and decrease (7.6°) in mentolabial angle. Conclusion: 3DCT showed a significant difference in perioral soft tissue changes in nasolabial and mentolabial angle but no significant change was observed in lip width. 3DCT is a reliable tool for 3D assessment. The conventional thought of changes in Nasolabial angle after surgery is changing due to the underlying factors which should be considered for prediction.
Total Face Approach (TFA) 3D Cephalometry and Superimposition in Orthognathic Surgery: Evaluation of the Vertical Dimensions in a Consecutive Series

Giovanna Perrotti,Giulia Baccaglione,Tommaso Clauser,Riccardo Scaini,Roberta Grassi,Luca Testarelli,Rodolfo Reda,Tiziano Testori,Massimo Del Fabbro

DOI: https://doi.org/10.3390/mps4020036

2021-05-18

Methods and Protocols

Abstract:Background: Cephalometry is fundamental in diagnosis, analysis, and planning of orthodontic-surgical treatment as it reveals skeletal relationship between the upper and lower jaw as well as facial aesthetic parameters. Nevertheless, 3D cephalometry has still not become the exam of choice in orthognathic treatment even though today CBCT (Cone Beam Computed Tomography) is routinely used in other branches of dentistry. Methods: In a sample of 13 patients undergoing bimaxillary orthognathic surgery a chin-vertex CBCT exam was prescribed prior to orthodontic treatment (OT) and 12 months after surgery (T1). The DICOM files uploaded to MaterialiseSimplant Ortho software pro 2.1 (Materialise Co., Leuven, Belgium) were analyzed following the multiplane 3D Total Face cephalometry protocol (TFA). Results: Results comparing pre-op and post-op TFA 3D cephalometry, were then evaluated considering reference values reported in literature. The CBCT, carried out pre- and post-surgery, were subsequently analyzed employing the superimposition method using cranial base as reference. The aim of this study is to evaluate the advantages and disadvantages of the two methods in orthognathic surgery. Conclusions: Multiplane 3D TFA allows the clinician to locate where major or minor skeletal discrepancies are found with respect to ideal parameters and is also useful in classifying skeletal intermaxillary relation. The superimposition method is highly intuitive but does not provide information on the quantity and location of osteotomic movement.
Three-dimensional Assessment of Facial Soft Tissue after Orthognathic Surgery in Patients with Skeletal Class III and Asymmetry

Jong-Hyeon Lee,Dong-Soon Choi,Bong-Kuen Cha,Young-Wook Park,Insan Jang

DOI: https://doi.org/10.14402/jkamprs.2013.35.6.360

2013-11-30

The Journal Of Korean Association of Maxillofacial Plastic and Reconstructive Surgeons

Abstract:Purpose: The purpose of this study was to perform three-dimensional (3D) assessment of facial soft tissue in patients with skeletal Class III and mandibular asymmetry after orthognathic surgery. Methods: Samples consisted of 3D facial images obtained from five patients with A point-nasion-B point angle less than 2 degrees, and more than 5 mm of menton deviation. All patients had been treated at Gangneung-Wonju National University Dental Hospital from 2009 to 2012. They had undergone orthognathic surgery of Lefort I, and sagittal split osteotomy for correction of skeletal deformity, and orthodontic treatment. Facial scanning was performed before treatment (T1) and post-surgical orthodontic treatment (T2). Linear and angle variables of soft tissue landmarks, antero-posterior facial depth, and facial volume were measured. Results: No significant differences in width of the alar base, mouth width, and nasal canting were observed between T1 and T2. However, lip deviation, menton deviation, alar canting, lip canting, and menton deviation angle were significantly reduced at T2. Antero-posterior facial depth on the axial plane parallel to the left cheilion was significantly reduced on the deviated side and significantly increased on the non-deviated side at T2. Volume of the lower lateral and lower medial parts of the face was reduced on the deviated side, and volume of upper lateral and lower lateral parts on the non-deviated side was significantly increased at T2. Conclusion: After orthognathic surgery, facial asymmetry of soft tissue was improved following skeletal changes, especially the mandibular region. Although the length of the alar base and mouth width did not change, lip and soft tissue menton were displaced to the medial side after treatment. Facial depth also became symmetric after treatment. Facial volume showed a decrease on the lower part of the deviated side and that on lateral parts of the non-deviated side showed an increase after treatment.
[Preliminary Evaluation on 3-Demension Changes of Facial Soft Tissue with Structure Light Scanning Technique Before and after Orthognathic Surgery of Class III Deformities].

Ju-xiang Peng,Jiu-hui Jiang,Yi-jiao Zhao,Yong Wang,Ze Li,Ning-ning Wang,Zhi-min Feng

DOI: https://doi.org/10.3969/j.issn.1671-167x.2015.01.018

2015-01-01

Abstract:OBJECTIVETo evaluate facial soft tissue 3-deminsion changes of skeletal Class III malocclusion patients after orthognathic surgery using structure light scanning technique.METHODSEight patients [3 males and 5 females, aged (27.08 ± 4.42) years] with Class III dentoskeletal relationship who underwent a bimaxillary orthognathic surgical procedure involving advancement of the maxilla by Le Fort I osteotomy and mandibular setback by bilateral sagittal split ramus osteotomy (BSSO) and genioplasty to correct deformity were included. 3D facial images were obtained by structure light scanner for all the patients 2 weeks preoperatively and 6 months postoperatively. The facial soft tissue changes were evaluated in 3-dimension. The linear distances and angulation changes for facial soft tissue landmarks were analyzed. The soft tissue volumetric changes were assessed too.RESULTSThere were significant differences in the sagittal and vertical changes of soft tissue landmarks. The greatest amount of soft tissue change was close to lips. There were more volumetric changes in the chin than in the maxilla, and fewer in the forehead.CONCLUSIONAfter biomaxillary surgery, there were significant facial soft tissue differences mainly in the sagittal and vertical dimension for skeletal Class III patients. The structure light 3D scanning technique can be accurately used to estimate the soft tissue changes in patients who undergo orthognathic surgery.
Inhibition of succinate-linked respiration and complex II activity by hydrogen peroxide.

Michelle D. Moser,S. Matsuzaki,Kenneth M. Humphries

DOI: https://doi.org/10.1016/j.abb.2009.06.009

IF: 4.114

2009-08-01

Archives of Biochemistry and Biophysics

Abstract:
Accuracy of Three-Dimensional Soft Tissue Prediction in Orthognathic Cases Using Dolphin Three-Dimensional Software

Tarek Elshebiny,Sherif Morcos,Abdulaziz Mohammad,Faisal Quereshy,Manish Valiathan

DOI: https://doi.org/10.1097/SCS.0000000000005037

2019-10-07

Journal of Craniofacial Surgery

Abstract:Introduction: Orthodontists and surgeons have been looking for more accurate methods to plan and predict surgical outcomes in patients with skeletal discrepancies. Methods: The sample consisted of 20 subjects from the surgical clinic of a graduate orthodontic program who had been treated with Le Fort I maxillary movement, bisagittal split osteotomy, with or without genioplasty. All subjects had to have preoperative (T0) and at least 6 months postoperative (T1) cone-beam computed tomographies that were imported to Dolphin three-dimensional (3D) software version 11.9 in digital imaging and communications in medicine format. Three-dimensional voxel-based superimposition on the cranial base was performed for T0 and T1 to accurately measure the skeletal surgical movements. A virtual orthognathic surgery was performed on T0 to mimic the actual skeletal osteotomies using the treatment simulation tool in Dolphin 3D. A prediction 3D soft tissue image (Tp) was generated based on the Dolphin virtual skeletal planning. The differences between Tp and T1 for all patients were measured using linear and angular measurements visualized by surface mapping. Results: Significant differences were found between Tp and T1 in Nasolabial angle, Soft tissue A point, and Subalar area. Conclusions: The soft tissue prediction accuracy after double jaw surgery using Dolphin 3D is limited in some areas, especially upper lip and base of the nose.

surgery
Three-dimensional assessment of the facial soft tissue changes that occur postoperatively in orthognathic patients.

T. Robert,C. Day

Abstract:With the development of 3-dimensional technology it has become increasingly possible to record the facial soft tissue changes that occur with growth and following orthodontic treatment. This article describes the use of the optical surface laser scanner to record and quantify the facial soft tissue changes following orthognathic surgery. Ten skeletal Class III patients were laser scanned, at previously determined time intervals, over a 6-month period following orthognathic surgery. Computer superimposition of the scanned images provided a graphic demonstration of the soft tissue changes as they occurred between the time intervals. Analysis of the results demonstrates a nonuniform, asymmetric resolution of facial swelling and adaptation of the soft tissues to the altered skeletal structure. This occurred principally over the initial 4 months following surgery. However, smaller changes continued to occur throughout the study period. This suggests that the facial soft tissues continue to change over a period of greater than 6 months. This knowledge is important as it is integral for obtaining informed consent from patients.

Medicine,Engineering
Ultra-low background alpha particle counter using pulse shape analysis

W. Warburton,B. Dwyer-McNally,M. Momayezi,J. Wahl

DOI: https://doi.org/10.1109/NSSMIC.2004.1462261

2004-10-16

Abstract:The need to measure alpha particle emissivities at levels below 0.005 /spl alpha//cm/sup 2/-hr is becoming increasingly important in fundamental physics experiments (e.g. neutrino and rare decay measurements), environmental monitoring, nuclear activities monitoring and semiconductor packaging materials. Present counters can barely reach this level, being limited both by cosmic ray events and by their own alpha emissions. Here we report a detector capable of measurements at 0.00005 /spl alpha//cm/sup 2/-hr using a large electrode ionization chamber with digital pulse shape analysis to locate the point of emission of each alpha particle. Filled with 1 atm N/sub 2/, the counter is essentially blind to both environmental gamma-rays and cosmic ray muon showers, so its background becomes limited by the ability of the pulse shape analysis to distinguish different points of alpha particle origin. The counter's geometry intentionally exaggerates differences between signals originating from its different surfaces, with an inter-electrode separation D over 3 times the alpha particle range L. Since signal risetimes equal charge drift times, anode events have 8-10 /spl mu/s risetimes, while sample event risetimes are 30-35 /spl mu/s and readily distinguished. Integrated charge also increases with drift length, producing a 2 to 1 difference between sample and anode events. Applying both risetime and amplitude cuts distinguishes between sample and anode emitted alpha particles at about 1 part in 1000. A guard electrode surrounding the anode allows alpha particles from the counter's sidewalls to be rejected at a similar ratio, so that essentially only alpha particles emanating from the sample are finally counted.
Evaluation of Soft Tissue Changes Following Orthognathic Surgery Using Virtual Surgical Planning Software

Abhirami Srikanth,Shanmugasundaram Somasundaram,Krishnakumar Raja

DOI: https://doi.org/10.7759/cureus.63495

2024-06-30

Cureus

Abstract:Context: Orthognathic surgery brings about a harmonious relationship between jaws, resulting in improved facial aesthetics. It is key to analyze if satisfactory results can be attained by using virtual surgical planning for orthognathic procedures so as to recommend it for routine clinical practice. Aims: The aims of this study were to evaluate the various soft tissue changes that take place following orthognathic surgery using three-dimensional (3D) imaging and virtual surgical planning software and quantify the accuracy of virtual surgical planning software on patients undergoing orthognathic surgery. Settings and design: This is an observational prospective study with a sample size of 12. Methods and materials: In this prospective study, 12 patients undergoing orthognathic surgery were included following the inclusion and exclusion criteria. A usual pre-surgical work-up was done and a 3D replica of the facial skeleton was formulated using the software with the DICOM data acquired from the patient i.e., CT and scans of patient's dentition. Virtual surgical planning was done and splints were manufactured according to the desired newly achieved position. Patients were operated following the virtual surgical plan guided by the computer-aided design and computer-aided manufacturing (CAD-CAM) splints. Post-operative evaluation was done. As the study is more of a descriptive study to obtain detailed knowledge of a new procedure, only one group is being studied and hence there is no statistical testing included in this study. Results: The mean discrepancy noticed after superimposition of soft tissue points was 0.92 with a standard deviation of 0.3. Conclusions: 3D CT virtual surgical planning is a reliable tool to achieve predictable and reliable post-operative results in orthognathic surgical cases.
Three-dimensional acquisition technologies for facial soft tissues - Applications and prospects in orthognathic surgery

S Rasteau,N Sigaux,A Louvrier,P Bouletreau

DOI: https://doi.org/10.1016/j.jormas.2020.05.013

Abstract:The management of patients with dento-maxillofacial deformities is based on assessments of the dental occlusion - facial skeleton - soft tissues triad. As societal demands and surgical practices have evolved, facial soft tissues have moved to the forefront of considerations in orthognathic surgery. Techniques are therefore required to analyze facial soft tissues objectively and reproducibly, for diagnosis, preoperative planning, and follow-up. Several technologies are currently capable of providing three-dimensional (3D) models of the face, either by 3D reconstruction of traditional computed tomography or cone beam computed tomography data, or directly by stereophotogrammetry, laser scanning or structured light scanning. Multimodal image registration techniques allow bone base, dental occlusion and facial soft tissue information to be combined in a 3D virtual patient. Three-dimensional cephalometric analysis of the facial skeleton and skin is now perfectly integrated in virtual planning and is gradually gaining in automation and accuracy. Photorealistic 3D simulations allow optimal soft tissue planning and facilitate physician-patient communication. Finally, these facial modeling techniques facilitate post-operative studies of soft tissues, which generally involve comparisons of volumetric data. There are many research avenues to pursue and technical improvements are to be expected, particularly through the development of big data and artificial intelligence approaches.
Descemet membrane endothelial keratoplasty as treatment for graft failure after descemet stripping automated endothelial keratoplasty.

J. Weller,Theofilos Tourtas,F. Kruse,U. Schlötzer-Schrehardt,T. Fuchsluger,B. Bachmann

DOI: https://doi.org/10.1016/j.ajo.2015.03.010

2015-06-01

Abstract:
Three-dimensional region-based study on the relationship between soft and hard tissue changes after orthognathic surgery in patients with prognathism

Lun-Jou Lo,Jing-Ling Weng,Cheng-Ting Ho,Hsiu-Hsia Lin

DOI: https://doi.org/10.1371/journal.pone.0200589

IF: 3.7

2018-08-01

PLoS ONE

Abstract:Both deep understanding and reliable prediction of postoperative soft tissue changes are crucial for planning orthognathic surgery. Instead of estimating soft tissue responses by measuring individual landmark changes, this study aimed to investigate the relationship (ratio) between soft and hard tissue movements in different facial regions through three-dimensional cone-beam computed tomography (CBCT). Preoperative and postoperative CBCT images were superimposed using the surface registration method on the basis of the cranial base, and 10 facial regions of interest were defined. Region-based volumetric subtractions between the preoperative and postoperative segments were performed. The volumetric differences and surface of each region were used to estimate the average movement. Correlation and regression analyses were performed to examine the relationships between the corresponding soft and hard tissue movements. An overall pattern of facial soft tissue movement was observed in patients with prognathism who underwent orthognathic surgery. The experiment results have shown that mean ratios for the average soft-to-hard tissue movements in the facial regions varied, which may not exactly be similar to the published reports because of the population biocharacteristics and study methods, but the trend is in agreement with the previous studies. Additionally, the prediction capability of the regression model was significantly high, ranging from 0.786 to 0.857, in upper lip, upper vermilion, and chin regions, thus demonstrating that the skin outline changes in these critical regions could be reliably predicted from the underlying bone movements. These results could likely be applied in future soft tissue simulation in orthognathic surgery.
Physical training in insulin-resistant states.

M. Berger,K. Becker-Zimmermann,L. Herberg

International Journal of Obesity

Abstract:It is the scope of this review to summarize animal experimentation carried out to investigate the effects of changes in habitual physical activity on glucose tolerance. Various studies in normal rats and in obese Zucker rats have demonstrated that physical training of mild intensity can partially revert or prevent the development of insulin resistance, glucose intolerance, and skeletal muscle insulin insensitivity. The molecular basis for these phenomena remains to be elucidated. Nevertheless, these observations strongly suggest the possibility to use physical exercise programmes in order to improve glucose tolerance in patients with maturity-onset type diabetes mellitus, especially if associated with obesity.
Soft tissue changes during orthopedic therapy: An in vivo 3-dimensional facial scan study

Federica Pellitteri,Paolo Albertini,Luca Brucculeri,Francesca Cremonini,Daniela Guiducci,Virginia Falconi,Luca Lombardo

DOI: https://doi.org/10.1016/j.ajodo.2024.08.016

2024-10-14

Abstract:Introduction: The aim was to compare the soft tissue changes in pretreatment and posttreatment facial scans of patients who had undergone various orthopedic treatments vs a control group of untreated growing patients. Methods: Facial scans were performed before (T0) and after (T1) orthopedic treatment in 15 patients prescribed rapid palatal expander (RPE), 15 cervical headgear (HG), and 15 facemasks (FM), as well as 6 months apart in 15 untreated growing patients. After best-fit scan alignment using Geometric Control X software (3D Systems Inc, Rock Hill, SC), a 3-dimensional (3D) analysis of soft tissue changes was performed, comparing 3D reference points (total 22) and 8 areas on T0 and T1 scans. Kruskal-Wallis nonparametric tests and pairwise comparison with Bonferroni's correction were applied to identify any statistically significant differences among groups (P <0.05). All analyses were conducted with SPSS software (version 28; IBM, Armonk, NY). Results: At T1, reduced soft tissue projection was found at the nose and upper lip in the HG group, the lower lip in the HG and RPE groups, and the chin in the FM and RPE groups. The RPE group displayed a statistically significant increase in facial divergence, confirmed by gnathion position (RPE vs FM [P = 0.018] and RPE vs control [P = 0.046]), as well as an increase in the soft tissue projection of both cheeks (left cheek in range of 1-2 mm [P = 0.030] and range of 0 to -1 mm [P = 0.022]; right cheek in range of 1-2 mm [P = 0.003] and range -1 to -2 mm [P = 0.001]). There were no clinically significant differences among groups in mandibular right and left body areas. Conclusions: The 3D facial analysis revealed significant differences in soft tissues among orthopedic treatments, especially at the upper and lower lip and chin areas, as compared with untreated patients.
Accuracy of 3-dimensional soft tissue prediction for orthognathic surgery in a Chinese population

Ker Jia Cheryl Lee,Suat Li Tan,Hui Yin Ada Low,Lu Jie Chen,Chee Weng Yong,Ming Tak Chew

DOI: https://doi.org/10.1016/j.jormas.2021.08.001

Abstract:Objectives: This study aims to determine the validity of a 3D planning software in predicting the soft tissue outcome of Chinese patients undergoing orthognathic surgery for correction of Skeletal III dentofacial deformity. Methods: Pre- and post-operative 3D facial stereophotogrammetric scans and cone beam computed tomography were taken for 10 Chinese patients who had underwent orthognathic surgery. The pre-operative 3D facial scan was integrated with the pre-operative CBCT using the ProPlan CMF software. The simulated soft tissue 3D face was then compared with the actual 3D facial scan obtained at least 6 months postoperatively. Two outcome measures were computed as follows (i) mean absolute difference between meshes (ii) percentage of points where the distance between the two meshes is 2mm or less. Results: The mean absolute difference between the predicted and actual soft tissue surface meshes for the full face and the 6 anatomic regions ranged from 0.72mm to 1.42 mm. The mean absolute distance between the meshes for all the anatomic regions were within 2 mm (p<0.05). The percentage of mesh points with less than 2mm error ranged from 72.5% to 92.5%. The accuracy of soft tissue prediction, assessed using mean absolute distance for the full face, was significantly correlated to the amount of sagittal surgical movement (r=0.707, p=0.022). The lower lip was also found to be the least accurate. Conclusions: Using ProPlan CMF, the accuracy of 3D soft tissue predictions for bimaxillary orthognathic surgery in Chinese Skeletal III patients were clinically satisfactory.
3D-Dimensinal Evaluationof the Ratio of Soft and Hard Tissue Cephalometric Analysis after Operation in Skeletal Angle Ⅲ

YANG Fan,ZHAGN Xing-wei,SUN Ting-ting,ZHANG Miao-miao

DOI: https://doi.org/10.3969/j.issn.1008-6455.2013.07.019

2013-01-01

Abstract:Objective To study the ratio between soft and hard tissue after the operations of maxillary Le FortⅠ advancement osteotomy and mandibular setback osteotomy and genioplasty in patient with skeletal class Ⅲ malformation were taken 3-dimensional cephalomenty.Methods Ten patients with skeletal class Ⅲ threated with orthognathic surgery who kad 3D computerized tomography before taken 1 month before and 6 months after Mass.reconstruct three dimensional models in CT post processing workstation.The landmarks and wariables were measured to complete 3-demensional cephalomentry analysis.Results All mandibular soft tisuue landmarks were less correlated with hard tissue landmarks(r=0.5-0.8,P0.05),Point of Prn was less correlated with point of A(r=0.5-0.8,P 0.05).Point of Sn was less correlated with the maxillary hard tissue significantly(r=0.5-0.8,P0.05).Conclusion The poor correlation between maxillary Sn and hard tissue wan affected by many factors.The same to mandibular.
Three-dimensional assessment of facial asymmetry in Class III subjects. Part 1: a retrospective study evaluating postsurgical outcomes

Deepal Haresh Ajmera,Richard Tai-Chiu Hsung,Pradeep Singh,Natalie Sui Miu Wong,Andy Wai Kan Yeung,Walter Yu Hang Lam,Balvinder S Khambay,Yiu Yan Leung,Min Gu

DOI: https://doi.org/10.1007/s00784-022-04463-4

Abstract:Objective: The present study aimed to determine the site and severity of maxillomandibular asymmetry before and after orthognathic surgery in asymmetric patients. Materials and methods: Presurgery and postsurgery cone beam computed tomography (CBCT) data of 21 facial asymmetry patients (7 males and 14 females, mean age: 23.0 ± 3.36 years) with soft tissue chin deviation ≥ 3 mm who had undergone bimaxillary surgery were evaluated. Seven midline and twenty bilateral hard tissue landmarks were identified for the evaluation of facial asymmetry and outcomes were assessed against age- and gender-matched control subjects. Results: In the asymmetry group, bilateral landmarks exhibited significant deviation in the mandible and midface regions. Before surgery, asymmetry was more severe at the mandibular midline and sites close to it, in the asymmetry group. Bimaxillary surgery proved to be highly effective, with a significant correction of the menton to a clinically normal value (2.90 mm, p < 0.001). After surgery, significant residual asymmetry was observed at the mental foramen (p = 0.001) in the R-L direction. Moreover, significant asymmetry persisted at the sigmoid notch (p = 0.001) in the S-I direction. Conclusions: Mandibular midline landmarks and chin peripheral regions contribute significantly to overall facial asymmetry characteristics. Despite significant correction after bimaxillary surgery, asymmetry persisted at several sites, thereby requiring secondary correction. Comprehensive 3D presurgical planning is central for asymmetry correction in a single surgery. Clinical relevance: The present study specifies the location of residual asymmetry sites and advocates the correction of those sites during initial surgery.
Three-dimensional Soft Tissue Changes at Nasolabial Region after Orthognathic Surgery in 88 Female Patients with Maxillary Protrusion

李虎,王兴,李自力,伊彪,梁成,王晓霞

DOI: https://doi.org/10.3760/cma.j.issn.1009-4598.2020.02.003

2020-01-01

Abstract:Objective:To evaluate the three-dimensional soft tissue changes at nasolabial region of female patients with maxillary protrusion after orthognathic surgery with maxillary setback.Methods:Peking University School and Hospital of Stomatology admitted 88 female patients with maxillary protrusion, aged 18-42 years old, with an average age of 28.2 years old. The segmental Le Fort Ⅰ osteotomies were performed in all patients with extraction of maxillary first premolars to create space for maxillary setback. The patients with maxillary protrusion and mandibular retraction received bilateral sagittal split ramus osteotomy(BSSRO)to move mandibular body, while the patients with bimaxillary protrusion received subapical osteotomy. 3dMD photos were taken preoperative 1-3 days and at least 6 months after operation to obtain three-dimensional facial images. The postoperative soft tissue changes of three-dimensional landmarks, line space and angles were measured with the use of Geomagic Studio 2013, and three-dimensional deviation analysis was applied. Paired t test was performed on the measured results. P<0.05 was considered statistically significant. Results:The distance of the subnasale in sagittal direction in patients with maxillary protrusion was (-10.90±18.60) mm preoperatively, (-10.05±18.62) mm ( t=-7.66, P<0.001)postoperatively, and setback of (0.85±1.00) mm; Labrale superius was (-15.18±18.67) mm preoperatively, (-11.92±18.9) mm postoperatively, and setback of (3.26±1.40) mm. Preoperative nasal width was (37.32±2.32) mm, postoperative for (38.08±2.32) mm ( t=-4.85, P<0.001)and increased by (0.76±1.47) mm.The lip width was (49.17±3.54) mm before surgery and (47.68±3.74) mm ( t=5.77, P<0.001)after surgery ( t=5.77, P<0.001), decreased by (1.49±2.42) mm. Philtrum length was (15.20±2.32) mm preoperatively and (15.78±2.17) mm ( t=-4.70, P<0.001)postoperatively, increased by (0.58±1.16) mm; The nasolabial angle was 101.98°±9.34° before surgery and 109.05°±8.59° ( t=-12.36, P<0.001)after surgery, increased by 6.99°±5.35°. The three-dimensional deviation analysis result showed that the soft tissue in the parasnasal area was moved forward (1.54±0.73) mm. Conclusions:3dMD can reflect the three-dimensional soft tissues changes after orthognathic surgery directly and accurately. After maxillary setback, the nasal base and upper lip of patients were significantly retrograded, and the paranasal area appeared forward, accompanied by increase in the nasolabial angle, lengthening of the philtrum length, vermillion length decrease, increase in nasal width and decrease in lip width.
Pseudotumour cerebri and paraproteinaemia.

R. Orrell,Salal Omer,Andrew A. Burt,Michael C. Galvin

DOI: https://doi.org/10.3109/10428199109068128

Abstract:We describe two cases of haematological malignancy, lymphoma and myeloma, presenting with pseudotumour cerebri. A haematological disorder should be considered in the differential diagnosis of the cause of pseudotumour cerebri, and the treatment of pseudotumour cerebri should be considered in the management of haematological disease, especially in avoiding irreversible visual deficit.

Bipolar lead system for the 1980s.

Prospective Comparison of Facial Soft Tissue Changes Using 2D Photographs and 3D Scanning After En Masse Dentoalveolar Maxillary Distalization Using Tads

A Perioral Soft Tissue evaluation after Orthognathic Surgery Using Three-Dimensional Computed Tomography Scan

Total Face Approach (TFA) 3D Cephalometry and Superimposition in Orthognathic Surgery: Evaluation of the Vertical Dimensions in a Consecutive Series

Three-dimensional Assessment of Facial Soft Tissue after Orthognathic Surgery in Patients with Skeletal Class III and Asymmetry

[Preliminary Evaluation on 3-Demension Changes of Facial Soft Tissue with Structure Light Scanning Technique Before and after Orthognathic Surgery of Class III Deformities].

Inhibition of succinate-linked respiration and complex II activity by hydrogen peroxide.

Accuracy of Three-Dimensional Soft Tissue Prediction in Orthognathic Cases Using Dolphin Three-Dimensional Software

Three-dimensional assessment of the facial soft tissue changes that occur postoperatively in orthognathic patients.

Ultra-low background alpha particle counter using pulse shape analysis

Evaluation of Soft Tissue Changes Following Orthognathic Surgery Using Virtual Surgical Planning Software

Three-dimensional acquisition technologies for facial soft tissues - Applications and prospects in orthognathic surgery

Descemet membrane endothelial keratoplasty as treatment for graft failure after descemet stripping automated endothelial keratoplasty.

Three-dimensional region-based study on the relationship between soft and hard tissue changes after orthognathic surgery in patients with prognathism

Physical training in insulin-resistant states.

Soft tissue changes during orthopedic therapy: An in vivo 3-dimensional facial scan study

Accuracy of 3-dimensional soft tissue prediction for orthognathic surgery in a Chinese population

3D-Dimensinal Evaluationof the Ratio of Soft and Hard Tissue Cephalometric Analysis after Operation in Skeletal Angle Ⅲ

Three-dimensional assessment of facial asymmetry in Class III subjects. Part 1: a retrospective study evaluating postsurgical outcomes

Three-dimensional Soft Tissue Changes at Nasolabial Region after Orthognathic Surgery in 88 Female Patients with Maxillary Protrusion

Pseudotumour cerebri and paraproteinaemia.