Abstract:Leather is made from animal hides and skins that have passed through several stages of processing, from soaking to finishing. Unhairing is a crucial processing stage in which hair is removed from the animal hide or skin through open up the hair and it facilitates subsequent operations. The conventional sodium sulfide-based unhairing process generates a high volume of effluent, which accounts for 50 to 70% of the total biochemical oxygen demand (BOD) and chemical oxygen demand (COD) load in the tanneries' effluent. This study aimed to investigate the potential of unhairing agents prepared from locally available plants. The research employed qualitative methods. Plant materials are collected, dried, and ground. In different proportions, unhairing extracts were obtained from Phytolacca dodecandra leaves, Cucurbita foetidissima fruits, and Solanum incanum fruits. In the conventional soaking process, plant extracts were applied in various concentrations to sheepskin. The physical parameters of conventionally processed (control) and experimentally treated leather were examined using FTIR, SEM, tear strength, percentage of elongation, and organoleptic tests. The unhairing solution was prepared from a mixture of 0.5% S. incanum extract, 0.5% P. dodecandra extract, 0.6% C. foetidissima extract, and 260 g/L lime powder lime, and this solution effectively removed the hair from the sheepskin in both hairs saving and hair burning unhairing process. The study revealed that the sheepskin treated with the plant extracts based on an unhairing agent and the conventional unhairing agent showed a comparable tensile strength (42.3 kg/cm and 45.2 kg/cm), tear strength (140.1 kg/cm2 and 143.5 kg/cm2), and percent elongation at break (40.2 and 42.3), respectively, which were above the permissible limit for leather production making. According to the study findings, the plant extracts have a good potential for removing hair from sheepskin, and they are eco-friendly and cost-effective compared to unhairing chemicals such as sodium sulfide.

Solid organic acid, aminopolycarboxylic acid and alkali salt in deliming to reduce nitrogenous pollution in tannery wastewater

Solid dicarboxylic acid assisted deliming in beamhouse to reduce nitrogen compounds in tannery wastewater

Ammonium-free and grain-protection deliming technology with the combination of aromatic sulfonic acid and sodium dihydrogen phosphate in leather manufacture

Green and Effective Route to Convert Chromium-Free Leather Waste into Protein Retarding Material for Building Gypsum

Efficient Removal of Ammonia-Nitrogen from Deliming Effluent by using Magnesium Ammonium Phosphate Precipitation Method

A cleaner leather chemical from feather waste for reducing ammonia-nitrogen pollution and improving biological treatment efficiency of tannery wastewater

Desalting and Recovering Naphthalenesulfonic Acid from Wastewater with Concentrated Bivalent Salt by Nanofiltration Process

An integrated pickling-bating technology for reducing ammonia-nitrogen and chloride pollution in leather manufacturing

Valorization of agitated thin film dryer (ATFD)-mixed-salt from textile wastewater for its application in leather manufacturing – a sustainable approach

Sustainable leather tanning: Enhanced properties and pollution reduction through crude protease enzyme treatment

Optimization of a Single-step Enzymatic Beamhouse: Toward Eco-friendly Leather Manufacturing

Management of tannery waste effluents towards the reclamation of clean water using an integrated membrane system: A state-of-the-art review

Complex extraction and stripping of H acid wastewater

Bio-intervention phyto-based material for raw goatskin preservation: a cleaner-sustainable approach

Treatment of Leather Industry Wastewater Using Coagulation, Ultraviolet/Persulfate Processing and Nanofiltration for Water Recovery

An efficient and economical treatment for batik textile wastewater containing high levels of silicate and organic pollutants using a sequential process of acidification, magnesium oxide, and palm shell-based activated carbon application

Synthesis of Multi-Site Polyether Amine Triazine Derivative for Sustainable Leather Manufacturing

Toward Sustainable Leather Processing: A Comprehensive Review of Cleaner Production Strategies and Environmental Impacts

Preparation of Sheepskin Unhairing Extracts from Locally Available Plants: Cleaner Leather Processing

Tannery effluent treatments with mangrove fungi, grass root biomass, and biochar

Experimental research on the removal of nitrogen from PU synthetic leather wastewater by combined process anaerobic MBBR and aerobic MBR