Abstract:Densified LLZTO electrolytes are synthesized using Li2O and Li2ZrO3 precursors via a 60‐second Joule heat‐assisted process. A Sn‐SnF2 coating, produced by melt‐quenching, forms a Li‐Sn alloy and LiF interlayer in situ, achieving near‐zero interfacial resistance and a critical current density of 23 mA cm–2. Solid‐state batteries with modified LLZTO and NMC811 cathodes retain 88.63% capacity after 3000 cycles. Garnet‐type Li6.5La3Zr1.5Ta0.5O12 (LLZTO) solid electrolytes provide the necessary electrochemical stability and ionic conductivity for solid‐state lithium‐metal batteries (SSLMBs). However, their wider application is hindered by their high interfacial resistance with electrodes and a lengthy synthesis process. This study presents the synthesis of densified LLZTO electrolytes using unconventional Li2O and Li2ZrO3 precursors through an ultrafast (≈60 s) Joule heat‐assisted synthesis approach in a single‐step process. The lower sintering temperature of Li2ZrO3 compared to traditional ZrO2 precursor yields LLZTO with larger grains, resulting in enhanced Li+ conductivity (7.0 × 10−4 S cm−1 at 25 °C), reduced electronic conductivity (1.7 × 10−10 S cm−1), and higher density (94.2%). Applying a 52–80 nm Sn:SnF2 coating on the LLZTO surface using a melt‐quenching approach produces a uniform interlayer that chemically converts to Li‐Sn alloy and LiF upon contact with lithium, resulting in a near‐zero interfacial resistance and a critical current density of 4.2 mA cm−2 at 25 °C. The SSLMBs, incorporating Sn:SnF2‐coated LLZTO electrolyte with NMC811 cathode, demonstrate remarkable initial capacity (181.1 mAh g−1) and cycle performance (88.63% capacity retention at 3000th cycle). The results indicate that this approach has the potential to advance the commercial fabrication technology for high‐performance solid electrolytes for SSLMBs.

Microwave-assisted solvothermal synthesis of nanostructured Ga-Doped Li7La3Zr2O12 solid electrolyte with enhanced densification and Li-ion conductivity

Tri-Doping of Sol–Gel Synthesized Garnet-Type Oxide Solid-State Electrolyte

Improvement of Ionic Conductivity in Li7La3Zr2O12 (LLZO) Solid Electrolyte By Doping with Aluminum/Tungsten

Stabilization of Li7La3Zr2O12 Solid Electrolyte through Ga-Based Precipitates and the Ga–Au Surface Layer

Preparation and performances of gallium-doped LLZO electrolyte with high ionic conductivity by rapid ultra-high-temperature sintering

Ga-doped lithium lanthanum zirconium oxide electrolyte for solid-state Li batteries

Submicron-Sized Nb-Doped Lithium Garnet for High Ionic Conductivity Solid Electrolyte and Performance of Quasi-Solid-State Lithium Battery

Ultrafast One‐Step Synthesis of Garnet‐Type Solid Electrolytes With Modified Surface and Microstructure for Solid‐State Lithium‐Metal Batteries

Study of Codoping Effects of Ta5+ and Ga3+ on Garnet Li7La3Zr2O12

Al-doped Li7La3Zr2O12 garnet-type solid electrolytes for solid-state Li-Ion batteries

Developing Preparation Craft Platform for Solid Electrolytes Containing Volatile Components: Experimental Study of Competition between Lithium Loss and Densification in Li7La3Zr2O12

Crystal Structure and Preparation of Li7La3Zr2O12 (LLZO) Solid-State Electrolyte and Doping Impacts on the Conductivity: An Overview

Experimental and Computational Study of Mg and Ta‐Doped Li7La3Zr2O12 Garnet‐Type Solid Electrolytes for All‐Solid‐State Lithium Batteries

Enhanced densification and ionic conductivity of Li-garnet electrolyte: Efficient Li2CO3 elimination and fast grain-boundary transport construction

Fusing Ta-doped Li7La3Zr2O12 grains using nanoscale Y2O3 sintering aids for high-performance solid-state lithium batteries

Defect chemistry engineering of Ga-doped garnet electrolyte with high stability for solid-state lithium metal batteries

Synthesis of Li7La3Zr2O12 Solid Electrolyte by Solid Phase Sintering Method

Experimental and Computational Study of Mg and Ta‐Doped Li7La3Zr2O12 Garnet‐Type Solid Electrolytes for All‐Solid‐State Lithium Batteries (Adv. Sustainable Syst. 6/2024)

Preparation of dense Ta-LLZO/MgO composite Li-ion solid electrolyte: Sintering, microstructure, performance and the role of MgO

Enhanced Performance of Li6.4La3Zr1.4Ta0.6O12 Solid Electrolyte by the Regulation of Grain and Grain Boundary Phases.