Abstract:Li metal, with the lowest thermodynamically achievable negative electrochemical potential and the highest specific capacity (3860 mAh g(-1)), is the ultimate anode choice for Li batteries. However, the highest reported Li plating/stripping Coulombic efficiency (CE) of 99.5% after extensive efforts is still too low for the Li metal-free (all the Li metal in cycling comes from cathode, without anode prelithiation) Li metal batteries. The low CE is attributed to both non-uniform Li plating/stripping on the lithiophobic Cu current collector and Li dendrite growth through lithiophilic organic-inorganic solid electrolyte interphase (SEI) formed in carbonate electrolytes. Here, we use a lithiophilic Bismuth graphite blend (Bi-Gr) substrate to replace lithiophobic Cu current collector to seed a uniform Li nucleation, and form a lithiophobic LiF-rich SEI rather than lithiophilic organic-rich SEI to suppress Li dendrite growth. Molecular dynamics simulations reveal the preferential reduction of anions in 2.0 M LiPF6 in tetrahydrofuran/2-methyl tetrahydrofuran (2.0 M LiPF6-mixTHF) electrolyte to generate LiF-rich SEI on plated Li. Bi-Gr substrate and 2.0 M LiPF6-mixTHF electrolyte enable the Li anodes to achieve a record high CE of 99.83% at a high capacity of 1.0 mAh cm(-2) and current of 0.5 mA cm(-2). The Bi particles serve as dispersed nucleation centers that promote uniform Li deposition with strong adhesion to the substrate to avoid dead Li, while the lithiophobic LiF-rich SEI promotes lateral Li growth and suppresses the vertical Li dendrite growth even at a high current density of 3.0 mA cm(-2) and high areal capacities of 3.0 mAh cm(-2). The regulation of Li nucleation and growth enables the Li metal-free LiFePO4 full cells to achieve 100 cycles at a practical areal capacity of >2.0 mAh cm(-2). This manuscript highlights the benefits of simultaneous substrate design to improve Li nucleation and electrolyte design to promote lithiophobic SEI growth, enabling a promising and practical route Li metal-free Li metal batteries.

Entropy-Driven 60 mol% Li Electrolyte for Li Metal-Free Batteries

Entropy-driven 60 mol% Li Electrolyte

A Dynamically Stable Sulfide Electrolyte Architecture for High-Performance All-Solid-State Lithium Metal Batteries

An Additive-Enabled Ether-Based Electrolyte to Realize Stable Cycling of High-Voltage Anode-Free Lithium Metal Batteries

An Amphiphilic Molecule Induced Anion-Enrichment Interface for Next-Generation Lithium Metal Batteries.

Non‐Fluorinated Cyclic Ether‐Based Electrolyte with Quasi‐Conjugate Effect for High‐Performance Lithium Metal Batteries

Electrolyte Design for Li Metal-Free Li Batteries

High‐Energy LiNiO2 Li Metal Batteries Enabled by Hybrid Electrolyte Consisting of Ionic Liquid and Weakly Solvating Fluorinated Ether

Electrolyte design combining fluoro- with cyano-substitution solvents for anode-free Li metal batteries

Entropy‐driven Liquid Electrolytes for Lithium Batteries

Lithium Metal-Compatible Antifluorite Electrolytes for Solid-State Batteries

Concentrated Electrolyte for Stable Lithium Metal Anode

Constructing an Inorganic-Rich Solid Electrolyte Interphase by Adjusting Electrolyte Additives for Stable Li Metal Anodes

Molecular design for electrolyte solvents enabling energy-dense and long-cycling lithium metal batteries

Solvent‐Free Electrolyte for High‐Temperature Rechargeable Lithium Metal Batteries

Sulfone-Based Electrolytes for Highly-Efficient and Stable Lithium Metal Anode

A Liquid Electrolyte with De-Solvated Lithium Ions for Lithium-Metal Battery

Non-Flammable Ester Electrolyte with Boosted Stability Against Li for High-Performance Li metal Batteries

High-voltage Li metal batteries enabled by a nonflammable amphiphilic electrolyte

Non-flammable ultralow concentration mixed ether electrolyte for advanced lithium metal batteries

High-voltage ether-based electrolytes for lithium metal batteries via synergy between the solvent and additive