Abstract:In the midst of the COVID-19 pandemic, new requirements for clean air supply are introduced for heating, ventilation, and air conditioning (HVAC) systems. One way for HVAC systems to efficiently remove airborne viruses is by filtering them. Unlike disposable filters that require repeated purchases of consumables, the electrostatic precipitator (ESP) is an alternative option without the drawback of reduced dust collection efficiency in high-efficiency particulate air (HEPA) filters due to dust buildup. The majority of viruses have a diameter ranging from 0.1 μm to 5 μm. This study proposed a two-stage ESP, which charged airborne viruses and particles via positive electrode ionization wire and collected them on a collecting plate with high voltage. Numerical simulations were conducted and revealed a continuous decrease in collection efficiencies between 0.1 μm and 0.5 μm, followed by a consistent increase from 0.5 μm to 1 μm. For particles larger than 1 μm, collection efficiencies exceeding 90% were easily achieved with the equipment used in this study. Previous studies have demonstrated that the collection efficiency of suspended particles is influenced by both the ESP voltage and turbulent flow at this stage. To improve the collection efficiency of aerosols ranging from 0.1 μm to 1 μm, this study used a multi-objective genetic algorithm (MOGA) in combination with numerical simulations to obtain the optimal parameter combination of ionization voltage and flow speed. The particle collection performance of the ESP was examined under the Japan Electrical Manufacturers’ Association (JEMA) standards and showed consistent collection performance throughout the experiment. Moreover, after its design was optimized, the precipitator collected aerosols ranging from 0.1 μm to 3 μm, demonstrating an efficiency of over 95%. With such high collection efficiency, the proposed ESP can effectively filter airborne particles as efficiently as an N95 respirator, eliminating the need to wear a mask in a building and preventing the spread of droplet infectious diseases such as COVID-19 (0.08 μm–0.16 μm).

Improved measurement of airborne viruses using a two-stage highly virus-enriching electrostatic particle concentrator with electric-field-enhancing wire electrodes

High air flow-rate electrostatic sampler for the rapid monitoring of airborne coronavirus and influenza viruses

Rapid monitoring of indoor airborne influenza and coronavirus with high air flowrate electrostatic sampling and PCR analysis

Performance of an Electrostatic Precipitator with Superhydrophobic Surface when Collecting Airborne Bacteria

Aerodynamic Size-Dependent Collection and Inactivation of Virus-Laden Aerosol Particles in an Electrostatic Precipitator

Microfluidics-based condensation bioaerosol sampler for multipoint airborne virus monitoring

Electrostatic precipitation (ESP) index driven bio-aerosol collection for a high biological viability sampling

Utilization of natural electrical charges on airborne microorganisms for their collection by electrostatic means

Electrostatic Precipitator Design Optimization for the Removal of Aerosol and Airborne Viruses

Sensitive and highly rapid electrochemical measurement of airborne coronaviruses through condensation-based direct impaction onto carbon nanotube-coated porous paper working electrodes

Optimal environmental sampling conditions for electrostatic aerosol-to-hydrosol collection of airborne viruses

Development of an Integrated Microfluidic Electrostatic Sampler for Bioaerosol

Development of a Novel Electrostatic-Based Bioaerosol Sampler

Design and performance of a novel miniaturized electrostatic sampler for efficient airborne particulate matter sampling

A Robot Assisted High-flow Portable Cyclone Sampler for Bacterial and SARS-CoV-2 Aerosols

Sampling and detection of airborne influenza virus towards point-of-care applications

Development of an Automated Electrostatic Sampler (aes) for Bioaerosol Detection

Continuous aerosol size separator using inertial microfluidics and its application to airborne bacteria and viruses.

Towards Real-Time Airborne Pathogen Sensing: Electrostatic Capture and On-Chip LAMP Based Detection of Airborne Viral Pathogens

A rapid and label-free platform for virus enrichment based on electrostatic microfluidics

Microfluidic device for efficient airborne bacteria capture and enrichment.