Abstract:Catalytic membranes, as a combination of heterogeneous advanced oxidation and membrane technology reaction systems, have important application prospects in the treatment of dyes and other organics. In practical applications, it is still challenging to construct catalytic membranes with excellent removal efficiency and fouling mitigation. Herein, molybdenum disulfide-iron oxyhydroxide (MoS2-FeOOH) was fabricated using iron oxide and MoS2 nanoflakes, which were synthesized by the hydrothermal method. Furthermore, by changing the concentration of MoS2-FeOOH, the MoS2-FeOOH/polyethersulfone (PES) composite ultrafiltration membrane was obtained with improved hydrophilicity, permeability, and antifouling capacity. The pure water flux of the composite membrane reached 385.3 L/(m2·h), which was 1.7 times that of the blank PES membrane. Compared with the blank membrane, with the increase of MoS2-FeOOH content, the MoS2-FeOOH/PES composite membranes had better adsorption capacity and catalytic performance, and the membrane with 3.0% MoS2-FeOOH content (M4) could be achieved at a 60.2% methylene blue (MB) degradation rate. In addition, the membrane flux recovery ratio (FRR) of the composite membrane also increased from 25.6% of blank PES membrane (M0) to more than 70% after two cycles of bovine serum albumin (BSA) filtration and hydraulic cleaning. The membrane with 2.25% MoS2-FeOOH content (M3) had the best antifouling performance, with the largest FRR and the smallest irreversible ratio (Rir). Catalytic self-cleaning of the composite membrane M3 recovered 95% of the initial flux with 0.1 mol/L H2O2 cleaning. The MoS2-FeOOH/PES composite membranes with the functions of excellent rejection and antifouling capacity have a good prospect in the treatment of printing and dyeing wastewater composed of soluble dyes.

Electrostatically Spun Fabrication of Fe3O4@SiO2/PVA Membranes for Efficient Methyl Orange (MO) Adsorption and Response Surface Optimization of the Processes

One-step Electrospinning of Negatively-Charged Polyethersulfone Nanofibrous Membranes for Selective Removal of Cationic Dyes

Modified Polyethersulfone Ultrafiltration Membrane for Enhanced Antifouling Capacity and Dye Catalytic Degradation Efficiency

In Situ Electrospun Porous MIL-88A/PAN Nanofibrous Membranes for Efficient Removal of Organic Dyes

Green Approach to Water Purification: Investigating Methyl Orange Dye Adsorption Using Chitosan/Polyethylene Glycol Composite Membrane

Selective Separation of Methyl Orange from Water Using Magnetic ZIF-67 Composites

Facile Light-Assisted Preparation of Reusable Magnetic Fe3O4@SiO2@Chitosan Composite for Adsorption of Dyes

Polyethersulfone nanofiltration membrane embedded by magnetically modified MOF (MOF@Fe3O4): fabrication, characterization and performance in dye removal from water using factorial design experiments

Selective removal of anionic and cationic dyes by magnetic Fe3O4-loaded amine-modified hydrochar

MOFs bound to melamine sponge for dye removal

Construction of self-healable and recyclable waterborne polyurethane-MOF membrane for adsorption of dye wastewater based on solvent etching deposition method

Magnetically recyclable Fe3O4–CuS@SiO2 catalyst for synergistic adsorption and photodegradation of methyl orange in wastewater under visible light

[Enhancing PPCPs Removal and Membrane Fouling Control of Ultrafiltration Membrane by UiO-66@Fe3O4@UiO-66]

ZIF-67/SA@PVDF Ultrafiltration Membrane with Simultaneous Adsorption and Catalytic Oxidation for Dyes

Fe3O4@C@polyaniline trilaminar core–shell composite microspheres as separable adsorbent for organic dye

Facile preparation of core-shell magnetic Fe3O4@ZIF-8-PSS for organic dyes adsorption

Novel fabricated low-cost hybrid polyacrylonitrile/polyvinylpyrrolidone coated polyurethane foam (PAN/PVP@PUF) membrane for the decolorization of cationic and anionic dyes

Resource utilization of organic spent adsorbent to prepare three-dimensional sulfate-functionalized layered double oxide for superior removal of azo dye

Unveiling the relationship between MOF porosity, particle size, and polyethersulfone membranes properties for efficient decontamination of dye and organic matter

Photocatalytic MOF fibrous membranes for cyclic adsorption and degradation of dyes

Fabrication of FeOCl/MoS2 catalytic membranes for pollutant degradation and alleviating membrane fouling with peroxymonosulfate activation