Abstract:Liquid accelerating agents have the advantages of simple operation and fast construction, and have become indispensable admixtures in shotcrete. However, most liquid accelerating agents in the market at present contain alkali or fluorine, which adversely affect concrete and seriously threaten the physical and mental health of workers. Therefore, in view of the above deficiencies, it is necessary to develop a new type of alkali-free fluorine-free liquid accelerating agent. In this paper, the polyaluminum sulfate early strength alkali-free liquid accelerator is prepared using polymeric aluminum sulfate, diethanolamine, magnesium sulfate heptahydrate and nano-silica. The influence of this agent on the setting time of fresh cement paste and compressive strength of the corresponding cement mortar is determined. Thermogravimetric analysis curves, X-ray diffraction and scanning electron microscopy images are obtained to investigate the mechanism. Findings show that the initial setting time and the final setting time of cement paste are 2 min 30 s and 7 min 25 s. The compressive strengths of cement mortar cured for 1 d, 28 d and 90 d are 2.4 MPa, 52.2 MPa and 54.3 MPa respectively. Additionally, the corresponding flexural strengths are 3.4 MPa, 9.8 MPa, 11.8 MPa. When the mass rate of accelerator is 7%, the mechanical strengths of cement mortar are the highest. The additions of fly ash and blast furnace slag can affect the mechanical of cement mortar mixed with accelerator. When the mass ratio of the fly ash and blast furnace slag is 15%, the mechanical strengths of cement mortar reach the highest. Moreover, the hydration heat release rate of cement is increased by the accelerator and the corresponding time of hydration heat peak is decreased by the accelerator. The accelerator can decrease the amount of needle-like hydration products and improve the compactness. The mechanical strengths are improved by consuming a large amount of Ca(OH)2 and forming more compact hydration products. It is recommended that the optimum dosage range of the polyaluminum sulfate early strength alkali-free liquid accelerator is 7%.

Effect of Fluoride in Alkali-Free Liquid Accelerator on Corrosion of Reinforced Shotcrete by Chloride Ion

Exploration on the occurrence state of fluorine in cement hydration products mixed with high fluorine alkali free liquid accelerator

The Influence of Alkali-Free Shotcrete Accelerators on Early Age Hydration and Property Development within Cement Systems

Preparation and properties of hexafluorosilicic acid series accelerators

Accelerators for Shotcrete – Chemical Composition and Their Effects on Hydration, Microstructure and Properties of Cement-Based Materials

Porosity, Pore Size Distribution and Chloride Permeability of Shotcrete Modified with Nano Particles at Early Age

Influence of fly ash and granulated blast furnace slag on autogenous shrinkage and drying shrinkage of cement-based materials mixed with alkali accelerator and alkali-free accelerator

Preparation of alkali-free liquid accelerator with fluorine-containing silicon residue and its accelerating mechanism

Effects of Blast Furnace Slag Powder and Limestone Powder on the Mechanical Properties and Durability of Shotcrete Using Monocalcium Aluminate Setting Accelerator

Preparation and hydration mechanism of aluminum formate/aluminum sulfate based alkali-free composite accelerator for sprayed concrete

Effect of Chloride-Induced Reinforcing Steel Corrosion on the Flexural Strength of Reinforced Concrete Beams

Chloride transport resistance of alkali-activated concrete exposed to combined chloride, sulfate and carbonation environment

Experimental investigation on calcium dissolution performance of shotcrete with different waterproofing agents

Experimental Study on the Improvement of Shotcrete Performance by Addition of Calcium Alumiante Based Accelerator and Metakaolin

Utilizing the Adsorbability of Pseudoboehmite for Tailoring the Stability of an Aluminum Sulfate Alkali-free Accelerator for Shotcrete.

Alkali-activated concretes based on high unburned carbon content fly ash: carbonation and corrosion performance

Development and Optimizing-mixing of New-type Non-alkaline Liquid Accelerator of Shotcrete

Comparison of the Performance of the Steel Fiber Shotcrete and Cast Concrete considering Accelerator Types and Core Sizes from a Tunnel Site

Investigations on the Performance of Shotcrete Using Artificial Lightweight Shale Ceramsite as Coarse Aggregate

Research on the Working Performance and the Corresponding Mechanical Strength of Polyaluminum Sulfate Early Strength Alkali-Free Liquid Accelerator Matrix Cement

Research on Chloride Appropriate Dosage for Incorporated Accelerated Corrosion