Abstract:With the increase in service life, the durability of a large number of concrete structures deteriorates year by year under the influence of the external environment, requiring urgent repair and reinforcement. Ordinary cement concrete materials have disadvantages such as high brittleness, low tensile strength, poor bonding ability, and insufficient durability, making it difficult to meet the repair needs of high-quality building structures. Therefore, self-synthesized anion WPU was used to study its effect on the mechanical properties of cement-based repair mortar. The research found that waterborne polyurethane (WPU)-modified cementitious composite repair materials exhibit better bonding strength with old concrete substrates compared to traditional cementbased materials. Additionally, the incorporation of WPU significantly reduces the brittleness of the repair material, ensuring enhanced efficiency in the repair process. However, according to the hydration heat test results, the addition of WPU delays the hydration process of the composite repair materials. In addition, the addition of WPU enhances the flexibility and bonding ability of the materials, with flexural strength and tensile strength at the age of 28 days reaching 13 MPa and 6 MPa, respectively. Through stress-strain curve analysis, it was found that the maximum strain amplification of WPU cement mortar can reach 134 %. Combined with SEM testing, it was observed that cured WPU films were present in specimens aged 28 days with P/C ratios of 10 % and 15 %. WPU and cement hydration products permeate each other, forming a threedimensional polymer network structure, improving the pore structure, and fully exerting the flexibility of WPU. This also validates the experimental results of increased ultimate tensile strain. WPU cement-based composite repair materials have higher bonding strength at a high P/C ratio (15 %), and WPU alone, used as an interface agent for pretreating the interface of old concrete, can improve the interface bonding strength, up to twice that of the group without the surface agent.

Properties of Polymer-Modified Cement-Water-Glass Slurry

Synthesis and Performance of A Self Crosslinkable Acrylate Copolymer with High Compatibility for an Oil Well Cement Modifier

Research on Sustainable Development of Fine-Grained Material Cement Slurry

Research about the Effect of Polypropylene Fiber on Mechanical Properties of Curing Sludge

Multi-scale Structure of In-Situ Polymerized Cementitious Composites with Improved Flowability, Strength, Deformability and Anti-Permeability

Experimental Study on Performance of Modified Cement-Based Building Materials under High-Water-Pressure Surrounding Rock Environment

Effect of Organic Polymers on Mechanical Property and Toughening Mechanism of Slag Geopolymer Matrix

Developing a Polypropylene Fabric, Silica Fume, and Redispersible Emulsion Powder Cementitious Composite for Dynamic Water Environment

Durability enhancement of cement-based repair mortars through waterborne polyurethane modification: Experimental characterization and molecular dynamics simulations

Influence of Coagulation of Polymer Dispersion on the Properties of Polymer-Modified Mortar

Investigation of the Effects of Polyurethane-Modified Polycarboxylate at Ambient Temperature on the Characteristics of Cement with Supplementary Cementitious Materials

Experimental Study on Properties of Polymer-Modified Cement Mortars with Silica Fume

Experimental Study on the Effect of Polycarboxylate Superplasticizer on the Performance of Cement-Based Grouting Materials

Performance of A Slow-Release Type Carboxylic Polymer and Its Application

Influence of Polymer Latexes on the Properties of High Performance Cement–Based Materials

Investigation On The Mechanical Properties Of Csa Cement-Based Coating And Its Application

Rheological, mechanical, and abrasion characteristics of polymer-modified cement mortar and concrete

Mechanism of Acrylate Emulsion-Modified Cement-Based Materials

Investigation on basic properties and microscopic mechanisms of polyacrylate latex modified cement grouting material for water blocking and reinforcement

Research on Cement Slurry Using Silica Fume Instead of Fly Ash

Mechanical Properties and Microstructure of Waterborne Polyurethane-Modified Cement Composites As Concrete Repair Mortar