Abstract:Microvalving is a pivotal component in many microfluidic lab-on-a-chip platforms and micro-total analysis systems (μTAS). Effective valving is essential for the integration of multiple unit operations, such as, liquid transport, mixing, aliquoting, metering, washing, and fractionation. The ideal microfluidic system integrates numerous, sequential unit operations, provides precise spaciotemporal reagent release and flow control, and is amenable to rapid, low-cost fabrication and prototyping. Centrifugal microfluidics is an attractive approach that minimizes the need for supporting peripheral hardware. However, many of the microfluidic valving methods described in the literature suffer from operational limitations and fail when high rotational frequencies or pressure heads are required early in the analytical process. Current approaches to valve closure add unnecessary complexity to the microfluidic architecture, require the incorporation of additional materials such as wax, and entail extra fabrication steps or processes. Herein we report the characterization and optimization of a laser-actuated, closable valve method for polymeric microfluidic devices that ameliorates these shortcomings. Under typical operational conditions (rcf ≤605 ×g) a success rate >99% was observed, i.e. successful valve closures remained leak free through 605 ×g. Implementation of the laser-actuated closable valving system is demonstrated on an automated, centrifugally driven dynamic solid phase extraction (dSPE) device. Compatibility of this laser-actuated valve closure approach with commercially available polymerase chain reaction (PCR) assays is established by the generation of full 18-plex STR profiles from DNA purified via on-disc dSPE. This novel approach promises to simplify microscale valving, improve functionality by increasing the number of integrated unit operations, and allow for the automation of progressively complex biochemical assays.

BioTrojans: viscoelastic microvalve-based attacks in flow-based microfluidic biochips and their countermeasures

Material-level countermeasures for securing microfluidic biochips

Structural Attacks and Defenses for Flow-Based Microfluidic Biochips

Toward Secure Microfluidic Fully Programmable Valve Array Biochips

Fabrication of Micro Pneumatic Valves with Double-Layer Elastic Poly(dimethylsiloxane) Membranes in Rigid Poly(methyl Methacrylate) Microfluidic Chips

Experimental Characterization of Electrical Current Leakage in Poly(dimethylsiloxane) Microfluidic Devices

Preparation of thermoswitchable micro capillary force valves inside polydimethylsiloxane microfluidic channels

Enhanced Watermarking for Paper-Based Digital Microfluidic Biochips

Design of Fault-Tolerant and Dynamically-Reconfigurable Microfluidic Biochips

A Rapid Prototyping Approach for Multi-Material, Reversibly Sealed Microfluidics

Thermally-actuated microfluidic membrane valve for point-of-care applications

PDMS Organ-On-Chip Design and Fabrication: Strategies for Improving Fluidic Integration and Chip Robustness of Rapidly Prototyped Microfluidic In Vitro Models

Soft tubular microfluidics for 2D and 3D applications

Modular Microphysiological System for Modeling of Biologic Barrier Function

Optically-controlled closable microvalves for polymeric centrifugal microfluidic devices

Simple and cost-effective fabrication of microvalve arrays in PDMS using laser cut molds with application to C. elegans manipulation in microfluidics

Fabrication and modelling of injection moulded all-polymer capillary microvalves for passive microfluidic control

Closable Valves and Channels for Polymeric Microfluidic Devices

Microfluidic Actuation via 3D-Printed Molds toward Multiplex Biosensing of Cell Apoptosis

A design and optimization of a high throughput valve based microfluidic device for single cell compartmentalization and analysis

Towards Practical Fabrication Stage Attacks Using Interrupt-Resilient Hardware Trojans