Abstract:Porous structures can reduce the elastic modulus of implants, decrease stress shielding, and avoid bone loss in the alveolar bone and aseptic loosening of implants; however, there is a mismatch between yield strength and elastic modulus as well as biocompatibility problems. This study aimed to investigate the parametric design method of porous root-shaped implants to reduce the stress-shielding effect and improve the biocompatibility and long-term stability and effectiveness of the implants. Firstly, the porous structure part was parametrically designed, and the control of porosity gradient distribution was achieved by using the fitting relationship between porosity and bias and the position function of bias. In addition, the optimal distribution law of the porous structure was explored through mechanical and hydrodynamic analyses of the porous structure. Finally, the biomechanical properties were verified using simulated implant-bone tissue interface micromotion values. The results showed that the effects of marginal and central porosity on yield strength were linear, with the elastic modulus decreasing from 18.9 to 10.1 GPa in the range of 20-35% for marginal porosity, with a maximum decrease of 46.6%; the changes in the central porosity had a more consistent effect on the elastic modulus, ranging from 18.9 to 15.3 GPa in the range of 50-90%, with a maximum downward shift of 19%. The central porosity had a more significant effect on permeability, ranging from 1.9 × 10-7 m2 to 4.9 × 10-7 m2 with a maximum enhancement of 61.2%. The analysis showed that the edge structure had a more substantial impact on the mechanical properties. The central structure could increase the permeability more effectively. Hence, the porous structure with reasonable gradient distribution had a better match between mechanical properties and flow properties. The simulated implantation results showed that the porous implant with proper porosity gradient distribution had better biomechanical properties.

Design of the Elastic Modulus of porous lattice structures composed of cells with continuously variable cross section carrying structures

Nonlinear Mechanics of Horseshoe Microstructure-Based Lattice Design

Efficient Biscale Design of Semiregular Porous Structures with Desired Deformation Behavior

Design and mechanical testing of porous lattice structure with independent adjustment of pore size and porosity for bone implant

Modeling and Design of Periodic Polygonal Lattices Constructed from Microstructures with Varying Curvatures

Design and analysis of the mechanical properties of controllable porous scaffolds for bone tissue engineering

Isotropic Octet-Truss Lattice Structure Design and Anisotropy Control Strategies for Implant Application

Multi-property Cellular Material Design Approach Based on the Mechanical Behaviour Analysis of the Reinforced Lattice Structure

Lattice and continuum modelling of a bioactive porous tissue scaffold

Design and Optimization of Conforming Lattice Structures

Transformable lattice with in-situ changeable elastic modulus arising from structural interaction

Evaluation of the Elastic Modulus and Plateau Stress of a 2D Porous Aluminum Alloy Based on a Convolutional Neural Network

Mechanical properties of the composite lattice structure with variable density and multi-configuration

Design of Porous Structure Based on the Voronoi Diagram and Stress Line for Better Stress Shielding Relief and Permeability

Hyper-elastic modeling and mechanical behavior investigation of porous poly-D-L-lactide/nano-hydroxyapatite scaffold material

Impact of Regular and Irregular Pore Distributions on the Elasticity of Porous Materials: A Microstructure-Free Finite Element Study

Parametric Design of Porous Structure and Optimal Porosity Gradient Distribution Based on Root-Shaped Implants

Mechanical behaviour of a novel lattice structure with two-step deformation

Electron beam melted heterogeneously porous microlattices for metallic bone applications: Design and investigations of boundary and edge effects

Adaptive anisotropic porous structure design and modeling for 2.5D mechanical parts

Multiscale concurrent design of lattice scaffolds driven by structural parameters