Abstract:Advanced oxidation processes (AOPs) based on sulfate radicals (SO4•-) are superior route for water treatment comparing to traditional AOPs, owing to their higher selectivity, longer half-life, and tolerance to wider pH range. To find an efficient source of SO4•-, peroxymonosulfate (PMS) molecules are widely used, which could be activated by the catalytic Fe(II) ions in traditional AOPs. However, this SO4•- -based catalytic activation method suffers from low conversion rate of Fe(III) to Fe(II), requires a large amount of catalytic Fe(II) ions, and produces a large amount of iron sludge as waste, which significantly limit its practical application for pollutants treatment. Herein, we show that by using molybdenum dioxide (MoO2) as a co-catalyst, the rate of Fe(III)/Fe(II) cycling reactions in the PMS system accelerated significantly, with a reaction rate constant 48 times that of conventional PMS/Fe(II) system. Our results showed outstanding removal efficiency (98%) of organic pollutant in 10 min with extremely low concentration of Fe(II) (0.036 mM), outperforming most reported SO4•--based AOPs systems. Additionally, MoO2 showed excellent stability and efficiency for wide range of pH values, recyclability for multiple activation cycles, practicality for removal of other organic compounds such as phenol and methylene blue. Surface chemical analysis combined with density functional theory (DFT) calculation demonstrated that both Fe(III)/Fe(II) cycling and PMS activation occurred on the (110) crystal plane of MoO2, while the exposed Mo4+ on the MoO2 surface are responsible for the co-catalyzing of iron ions to activate the PMS radicals. Considering its performance, low cost, and non-toxicity, using MoO2 as a co-catalyst in SO4•--based AOPs is a promising technique for large-scale practical environmental remediation.

Facile synthesis of defect-rich interfacial Mo/MoO2 for efficient peroxymonosulfate activation and refractory pollutants degradation

MoO 2 Cocatalytic Fe(II)/Fe(III) for the Activation of Peroxymonosulfate with Enhanced Oxidation Performance

Oxygen Vacancy Boosting Peroxymonosulfate Activation over Nanosheets Assembled Flower-Like Comoo4 for Contaminant Removal: Performance and Activity Enhancement Mechanisms

FeOOH@MoS<sub>2</sub> as a highly effective and stable activator of peroxymonosulfate-based advanced oxidation processes for pollutant degradation

Improving Peroxymonosulfate Activation Via Surface-Constructed Oxygen Vacancies on Co0.2FeOx for Durable Water Decontamination

Metallic Active Sites on MoO2(110) Surface to Catalyze Advanced Oxidation Processes for Efficient Pollutant Removal

Surface oxygen vacancy inducing peroxymonosulfate activation through electron donation of pollutants over cobalt-zinc ferrite for water purification

Insights into mechanism of peroxymonosufate activation by Mo single-atom catalysts: Singlet oxygen evolution and role of Mo-N coordination

FeOOH@MoS2 As a Highly Effective and Stable Activator of Peroxymonosulfate-Based Advanced Oxidation Processes for Pollutant Degradation

Oxygen Vacancies-Dominated Reactive Species Generation from Peroxymonosulfate Activated by MoO3-x for Pollutant Degradation.

Oxygen vacancies-dominated reactive species generation from peroxymonosulfate activated by MoO 3−x for pollutant degradation

Ultra-facile Fabrication of Oxygen Vacancy-Laden Catalyst for Peroxymonosulfate Activation to Degrade Organic Pollutant in Water: Performance and Mechanism

Oxygen Vacancies of Mn/CeOx-H Induced Non-Radical Activation of Peroxymonosulfate Through Electron Mediation for Bisphenol A Degradation

Efficiently activate peroxymonosulfate by Fe3O4@MoS2 for rapid degradation of sulfonamides

Highly efficient and selective organic pollutants degradation via peroxymonosulfate activation over micron-sized Co-MOF: Nearly 100% singlet oxygen mechanism

Revisiting the Heterogeneous Peroxymonosulfate Activation by MoS2: a Surface Mo-Peroxymonosulfate Complex as the Major Reactive Species

Toward Practical Water Decontaminations Via Peroxymonosulfate Nonradical Oxidation: the Role of Cocatalyst MoS2 with Sulfur Vacancies

Heterogeneous Activation of Peroxymonosulfate Using Mn-Fe Layered Double Hydroxide: Performance and Mechanism for Organic Pollutant Degradation.

Highly efficient catalyst of Crednerite CuMnO2 for PMS activation: Synthesis, performance and mechanism

Fabrication of FeOCl/MoS2 catalytic membranes for pollutant degradation and alleviating membrane fouling with peroxymonosulfate activation

Sustainable Activation of Peroxymonosulfate by the Mo(IV) in MoS2 for the Remediation of Aromatic Organic Pollutants