Abstract:Two commercially available portable Rapid DNA instruments were evaluated for their ability to process 1 µL and 10 µL saliva samples deposited on metal and plastic surfaces and contaminated with surrogates of cesium (Cs)-137, strontium (Sr)-90 and cobalt (Co)-60; radioactive materials potentially released during a nuclear weapon accident or a radiological dispersal device detonation. A comparable success rate was noted for both Rapid DNA instruments when considering the number of complete and balanced DNA profiles, the number of profiles with a minimum of 10 autosomal STR loci (out of 23 [FlexPlex™ 27] or 21 [GlobalFiler™ Express]), and the possibility to search a national DNA database in Canada and the United States. Cobalt had an adverse impact on the quality of the megaplex short tandem repeat (STR) DNA profiles derived on each instrument for two of the three contamination levels tested in this study, i.e., 0.05 M and 0.1 M as reflected by a reduced number of detected alleles and decreased profile peak heights. Strontium exhibited some adverse effect on the Rapid DNA results when used at the highest contamination level (0.1 M) whereas cesium had none. No new artifacts were observed in the Rapid DNA profiles of samples spiked with the non-radiogenic surrogates. Importantly, in the context of a radiological/nuclear (RN) event, the ANDE™ 6C offers the possibility to dispose of all radioactive materials associated with contaminated samples quickly using a chip on which all steps of the Rapid DNA process are performed whereas the RapidHIT™ ID accumulates radioactive materials for many days before disposal. An individual handling 25 samples in a week (5 per day) on the RapidHIT™ ID at a 30.5 cm distance with a 5 min exposure to the radioactive source estimated at every run would exceed the 0.042 µSv/5 min limit with gamma dose rates for Cs at 0.13 mSv and for Co at 3.8 mSv. Beta dose rates calculated for the surrogate isotopes at the three concentrations tested were also above the recommended radiation exposure limit of 1 mSv/yr (0.042 µSv/5 min). Various potential mechanisms of action behind the interference noted for Sr and Co at high concentrations are presented. These elements may play a role in the steps prior to PCR (at the DNA molecule by binding to bases or to phosphate groups), during PCR (at the DNA polymerase as cofactors for catalytic sites), or even during amplified DNA fragment detection (as fluorescence quenchers).

DNA and fingerprint analyses of debris from improvised explosive device

Successful STR amplification of post-blast IED samples by fluorescent visualisation and direct PCR

Determination of Explosives and Drugs Based on Chip-Based FAIMS Technology

Infrared to terahertz identification of chemical substances used for the production of IEDs

Rapid and On-Scene Chemical Identification of Intact Explosives with Portable Near-Infrared Spectroscopy and Multivariate Data Analysis

Rapid, on-site identification of explosives in nanoliter droplets using a UV reflected fiber optic sensor.

Evaluation of interferents in sampling materials for analysis of post‐explosion residues (explosive emulsion/ANFO) using gas chromatography–mass spectrometry (GC/MS)

Non-destructive ultrasonic testing for identifying concealed weapons and analyzing internal chemical substances

Setup and Analysis of a Mid-Infrared Stand-Off System to Detect Traces of Explosives on Fabrics

Detection of Trace Explosives Using a Novel Sample Introduction and Ionization Method

Fabrication of a self-assembled and flexible SERS nanosensor for explosive detection at parts-per-quadrillion levels from fingerprints

Application of fluorescence sensing technology in trace detection of explosives

Processing biological samples from simulated radiological terrorist events using Rapid DNA instruments

Rapid detection of explosives in collected dust using ion mobility spectrometry

An on-site inspection system for explosives in a container using dust collection through a vent cover and ion mobility spectrometric detection

Direct Detection of Explosives on Solid Surfaces by Mass Spectrometry with an Ambient Ion Source Based on Dielectric Barrier Discharge

Preliminary Investigation of a Potential Optical Biosensor Using the DiamondTM Nucleic Acid Dye Applied to DNA and Friction Ridge Analysis from Fingerprint Traces

Precision Touch DNA Sampling on Plastic Bag Knots for Improved Profiling of Packer and Holder Contributions

A study into the natural occurrence of inorganic ions relevant to forensic explosives investigations on human hands

Preliminary study on mitochondrial DNA analysis from different sports items

Predicting probative levels of touch DNA on tapelifts using DiamondTM Nucleic Acid Dye