IS Degrees - Sociotechnical or Technosocial?

J. Coady,R. Pooley

DOI: https://doi.org/10.1007/b137171_93

Abstract:

What problem does this paper attempt to address?

Enhancing Foam Stability with Β-Lactoglobulin Nanoparticles: Insights into Molecular-Level Interplay and Stabilization Mechanism

Peilong Sun,Jiujie Xia,Chengchen Guo,Ximing Zhang,Zhengxun Wei,Ning Xiang

DOI: https://doi.org/10.1016/j.foodhyd.2023.109290

IF: 10.7

2024-01-01

Food Hydrocolloids

Abstract:Foams are essential in food applications, but maintaining their stability is challenging. Protein-based nano particles are ideal stabilizers for foams. We investigated ll-lactoglobulin (ll-LG) and used microbial transglutaminase (mTG) to create protein nanoparticles. By analyzing protein structures and using molecular dynamics simulation, we studied how mTG cross-linking affected ll-LG at a molecular level. Minimal changes were observed in the secondary and tertiary structures of ll-LG in its molten globular state. However, the solvent accessible area of mTG substrates lysine and glutamine underwent substantial alteration, which increased mTG accessibility. These nanoparticles exhibited a size distribution of 10-40 nm and significantly improved foam ability and foam stability compared to native ll-LG. This study provides a comprehensive understanding of the relationship between ll-LG protein conformation, intermediate-sized features in protein nanoparticles, and macroscopic foam properties, which introduces a new approach for utilizing protein nanoparticles in the food industry.
Stabilization of Pickering Foams by High-Aspect-Ratio Nano-Sheets

Juan S. Guevara,Andres F. Mejia,Min Shuai,Ya-Wen Chang,M. Sam Mannan,Zhengdong Cheng

DOI: https://doi.org/10.1039/c2sm27061g

IF: 4.046

2013-01-01

Soft Matter

Abstract:We developed Pickering foams highly stabilized by high-aspect-ratio (xi = diameter/thickness) nano-sheets. The effects of particle aspect ratio, concentration, and hydrophobicity were also investigated. To our knowledge, our study provides the first experimental evidence of the effect of particle aspect ratio on particle-stabilized foams. The adsorption properties of these highly anisotropic nano-sheets are strongly affected by their small thickness and large lateral size (i.e., two-dimensional). These high-aspect-ratio nano-sheets were obtained by exfoliation of a-zirconium phosphate (ZrP) crystals with propylamine (C3H7NH2, PA). The hydrophobicity of the nano-sheets was tailored by adjusting the PA : ZrP molar ratio in the suspension. The morphology and stability of the foam depend on the nano-sheet aspect ratio and concentration as well as on the PA : ZrP molar ratio. Here, we found that using low and high aspect ratio nano-sheets having a high and an intermediate degree of hydrophobicity, respectively, is the successful formula to obtain high foam stability. The aqueous foams were characterized by optical and cross-polarized micrographs. Scanning electron microscopy (SEM) micrographs of dried foams revealed the adsorption of the PA-ZrP nano-sheets on the air-water interface. The foam stability was studied by measuring the foam and the water volume as a function of time to obtain the foam decay and water drainage rate, respectively. We also observed that the foams were stabilized by jammed layers of nano-sheets located in the bulk and at the air-water interface. These layers of particles prevent air diffusion between the bubbles, hence arresting Ostwald ripening and coalescence.
Preparation, Characterization, and Foaming Properties of Soy Protein Nanoparticles by the Cross-Linking Reaction Induced by Microbial Transglutaminase

Sihong Wu,Jiujie Xia,Zhengxun Wei,Weijun Sun,Ximing Zhang,Ning Xiang

DOI: https://doi.org/10.1016/j.foodhyd.2023.108627

IF: 10.7

2023-01-01

Food Hydrocolloids

Abstract:Native soy proteins have limited surface properties, but fortunately, it is expected that their foaming behaviors can be improved through the enzymatic cross-linking method. In this paper, by using the cross-linking method with microbial transglutaminase (mTG) as the catalyst, soy protein isolate (SPI), soy β-conglycinin (7S), and soy glycinin (11S) nanoparticles (NPs) were prepared in the molten state of the protein induced by dithiothreitol (DTT). We compared the structural characteristics of these nanoparticles, including particle sizes, morphologies, zeta potentials, surface hydrophobicities, changes of spatial structure, and cross-linking degrees. In addition, their foaming properties, including foamabilities, foam stabilities, and bubble diameters, were also tested. The results show that there are no significant differences in the foamabilities between the native soy proteins and their nanoparticles with similar initial foam heights. However, it is found that 11S NPs have enhanced foam stabilities with longer half-lives and smaller changes in bubble size, which is closely related to their high wettability and cross-linking degree. This study may provide references for the application of soy protein nanoparticles as new foam stabilizers to replace the traditional foaming agents in the food industry.
The shaman told me so!

S. Hani,S. Ching,Mohd Azizi Sanwani

2012-05-01

Family Medicine

Abstract:
Effect of surfactants on the interfacial behaviors of diacylglycerol-based solid lipid nanoparticles and physical stability of W/O emulsion

Dechu Chen,Yasi Yu,Yee Ying Lee,Nannan Chen,Yong Wang,Chaoying Qiu

DOI: https://doi.org/10.1016/j.colsurfa.2023.132070

2023-07-21

Abstract:The influence of surfactants (Span 80, Span 60, PGPR and sodium caseinate) on the stability of W/O emulsions stabilized by diacylglycerol (DAG)-based solid Lipid nanoparticles (SLN) was investigated. DAG-based SLN showed phase separation at high NaCl concentration and acidic pH although the SLN-stabilized W/O emulsion was minimally affected. Span 80 increased the hydrophobicity whereas Span 60 increased the hydrophilicity of SLN. With concentration close to CMC , both Span surfactants caused detachment of SLN from interface and reduced emulsion stability. Nonetheless, addition of a small amount (0.1 wt%) of Span surfactants increased the interfacial modulus. The co-adsorption of SLN and PGPR at the oil-water interface promoted the formation of denser network structure and higher interfacial elasticity, which enhanced the emulsion rigidity and freeze-thaw stability. Sodium caseinate (NaCAS) showed intense competition with particles for adsorption at the interface and caused emulsion destabilization. Consequently, the NaCl release rate was directly influenced by the emulsion stability and the interaction between surfactants with SLN. The results have important implications for applying DAG nanoparticles as stabilizers in W/O emulsions with tailoring interfacial rigidity and water-soluble component release behaviors.

chemistry, physical
Immune response to non-O157 Vero toxin-producing Escherichia coli in patients with hemolytic uremic syndrome.

K. Ludwig,Martin Bitzan,Stefan Zimmermann,Markus Kloth,Hans Ruder,Dirk E. Müller-Wiefel

DOI: https://doi.org/10.1093/INFDIS/174.5.1028

1996-11-01

Abstract:The incidence and time course of the immune response to Vero toxin-producing Escherichia coli (VTEC) other than O157 (O26, O55, O111, O128) were determined in 107 children with enteropathic hemolytic uremic syndrome (HUS) by ELISA and compared to antibody profiles of 125 healthy pediatric controls and 100 children with community-acquired uncomplicated diarrhea. Six of 8 HUS patients with non-O157 VTEC isolates exhibited a serologic response to the homologous lipopolysaccharide antigen similar to that of patients infected with E. coli O157. In addition, elevated IgM or IgG antibodies were demonstrated in 7 of 19 culture- and O157 serology-negative HUS patients. Serogroup-specific antibodies decreased below cutoff levels within several months after convalescence. Anti-non-O157 antibodies were found in 14% of the diarrheic controls. Unexpectedly, a high proportion (27/82) of anti-O157 lipopolysaccharide antibody-positive HUS samples reacted with LPS from E. coli O55:B5, suggesting shared epitopes with endemic VTEC O157 strains.
Physical stability and rheological behavior of Pickering emulsions stabilized by protein–polysaccharide hybrid nanoconjugates

See Kiat Wong,Liang Ee Low,Janarthanan Supramaniam,Sivakumar Manickam,Tin Wui Wong,Cheng Heng Pang,Siah Ying Tang

DOI: https://doi.org/10.1515/ntrev-2021-0090

2021-01-01

Nanotechnology Reviews

Abstract:Abstract This study investigated the emulsifying properties of a protein–polysaccharide hybrid nanoconjugate system comprising cellulose nanocrystals (CNC, 1% w/v) and soy protein isolate at various concentrations (SPI, 1–3% w/v). The average particle size of the nanoconjugate increased, and the zeta potential decreased when 3% (w/v) of SPI was used. The contact angle and thermal stability of CNC improved with the conjugation of SPI. Upon Pickering emulsification, 0.5% (w/v) of CNC–SPI nanoconjugate as particle stabilizer was sufficient to obtain stable emulsions. The CNC–SPI1 formulation (CNC to SPI, 1:1) provided the emulsion with the smallest droplet size and higher emulsifying activity. Intriguingly, ultrasound (US) pre-treatment on nanoconjugates before emulsification significantly reduced the size of the emulsion. The rheological assessment demonstrated that the CNC–SPI-stabilized emulsions exhibit shear thinning behavior at a lower shear rate and shear thickening behavior at a higher shear rate, indicating the interruption of existing attractive interactions between the CNC particles. All emulsions exhibited higher elastic modulus ( G ′) than viscous modulus ( G ′′), suggesting high viscoelastic properties of the emulsions. This study demonstrates that CNC–SPI nanoconjugate with optimum protein to polysaccharide ratio has great potential as a natural particle stabilizer in food and nutraceutical emulsion applications.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
Synergistically stabilized wet foams from heat treated β-lactoglobulin and cellulose nanofibrils and their application for green foam production

Zhaleh Atoufi,Korneliya S. Gordeyeva,Maria F. Cortes Ruiz,Per A. Larsson,Lars Wågberg

DOI: https://doi.org/10.1016/j.apmt.2024.102251

IF: 8.663

2024-06-02

Applied Materials Today

Abstract:Achieving a sustainable foam production requires a complete substitution of synthetic components with natural and renewable alternatives, as well as development of an environment–friendly production process. This work demonstrates a synergetic combination of heat-treated β-lactoglobulin proteins and cellulose nanofibrils (CNFs) to create fully bio-based and highly-stable wet foams. Furthermore, a gradual reduction in the pH, enabled oven-drying of the wet foams without any major structural collapse of the foam, resulting in the preparation of lightweight solid foams with the density of 10.2 kg.m −3 . First, the foaming behavior of heat-treated β-lactoglobulin systems (HBSs) containing amyloid nanofibrils (ANFs) and non-converted peptides was investigated at different pHs. Subsequently, the HBS foams were stabilized using CNFs, followed by a gradual acidification of the system to a final pH of 4.5. To gain a deeper understanding of the stabilization mechanism of the foam, the interactions between the foam's components, their positioning in the foam structure, and the viscoelasticity of the fibrillar network were investigated using quartz crystal microgravimetry, confocal microscopy and rheology. The analysis of the obtained data suggests that the stability of the foams was associated with the accumulation of CNFs and ANFs at the air–water interface, and that the concomitant formation of an intertwined network surrounding the air bubbles. This together resulted in a significant decrease in drainage rate of the liquid in the foam lamellae, bubble coarsening and bubble coalescence within the foams. The results also show that the major surface–active component participating in the creation of the foam is the free peptide left in solution after the formation of the ANFs. A slow reduction in pH to 4.5 lead to further gelation of the fibrillar network and an improved storage modulus of the foam lamellae. This resulted in a strong coherent structure that could withstand oven-drying without collapse. The density, porosity, microstructure and compressive mechanical properties of such prepared dry foams were assessed. Overall, the results demonstrate the potential of HBSs to replace synthetic surfactants and outlines a sustainable preparation protocol for the preparation of light-weight porous composite structures of ANFs and CNFs.

materials science, multidisciplinary
Microstructure, Rheology, and Creaming Stability of Pickering Emulsions Stabilized with SPI‐Soy Peptide Nanoparticle Complex

Dan Wang,Wei Chen,Yangyong Dai,Luping Zhao,Xiangyang Li,Xiuzhen Ding

DOI: https://doi.org/10.1111/ijfs.16628

2023-08-09

Abstract:Summary The use of two emulsifiers to fabricate a composite emulsifier is a useful strategy used to strengthen the emulsifying capacity. To investigate the feasibility of using soy protein isolate (SPI) to stabilize Pickering emulsions stabilized by soy peptide nanoparticles (SPNs), the SPI was introduced into the SPN system to fabricate SPI‐SPN complex emulsifiers, and the effects of the SPI on the properties of the SPNs and SPN‐stabilized emulsions were investigated with various oil fractions. The addition of SPI significantly reduced the particle sizes and surface hydrophobicities. Furthermore, the SPI increased the structural rearrangements of the SPNs at the oil‐water interface. Compared with emulsions stabilized with the SPN alone, the droplet sizes of the SPI‐SPN emulsions were smaller, and the interface protein adsorption percentages were lower for all oil fractions. The viscosity of the SPI‐SPN emulsion was higher than that of the SPNs emulsion at Φ≤0.60. Decreases in G′ and G′′ were observed when the SPI was added at all Φ values tested. More importantly, the added SPI markedly enhanced the creaming stabilities of the SPN emulsions at low Φ (≤0.40). These results confirmed that SPI improved the emulsifying activity of the SPNs and enhanced the stabilities of Pickering emulsions stabilized with SPNs at low Φ.

food science & technology
Use of glycopyrrolate in the treatment of meniere's disease

I. S. Storper,J. Spitzer,Mark Scanlan

DOI: https://doi.org/10.1097/00005537-199810000-00004

IF: 2.97

1998-10-01

The Laryngoscope

Abstract:Objectives/Hypothesis: The objective of this study was to determine whether glycopyrrolate is useful as a vestibular suppressant in patients with Meniere's disease. The tested hypotheses were that glycopyrrolate would decrease the perception of dizziness measured by the Dizziness Handicap Inventory in patients with Meniere's disease and that placebo would cause no such decrease. Study Design: Randomized, prospective. Methods: Thirty‐seven subjects with a diagnosis of Meniere's disease were administered either 2 mg of glycopyrrolate or placebo twice daily as needed for vertigo. All were also administered the regimen of 1500 mg sodium/day diet and diuretic. The following indices were examined: Dizziness Handicap Inventory, Tinnitus Handicap Inventory, Modified Somatic Perception Questionnaire, Beck Depression Inventory, hearing examination, and electronystagmography. After 4 to 6 weeks of the drug regimen, Dizziness Handicap Inventory, Tinnitus Handicap Inventory, Modified Somatic Perception Questionnaire, and Beck Depression Scale were reexamined. Paired t tests were performed to verify the significance of improvement before and after treatment. Results: Subjects who received glycopyrrolate had statistically significant reduction in Dizziness Handicap Inventory, Beck Depression Score, and Modified Somatic Perception Score. In the placebo group, no improvement in any index was found. Conclusions: The hypothesis that glycopyrrolate is a useful vestibular suppressant in patients with Meniere's disease was statistically verified. Laryngoscope, 108:1442–1445, 1998
Polyphenol improve the foaming properties of soybean isolate protein: Structural, physicochemical property changes and application in angel cake

Yi-Lun Wang,Shi-Cheng Dai,Zi-Teng Lian,Xiao-Yi Cheng,Xiao-Hong Tong,Huan Wang,Liang Li,Lian-Zhou Jiang

DOI: https://doi.org/10.1016/j.ijbiomac.2024.134315

Abstract:With the increasing demand for food foaming, how to enhance the foaming properties of protein has gradually become the research focus. This work studied the effect of synephrine (SY) on foaming properties, structure properties, and physicochemical properties of soybean protein isolate (SPI). When the mass ratio of SY to SPI was 1:2, compared with SPI alone, the foam capacity and foam stability of the SY-SPI complex were significantly enhanced. Optical microscopy and confocal laser scanning microscope showed that the improvement in foaming performance was mainly due to the reduction of bubble size and uniform protein distribution. Circular dichroism spectrum and fluorescence spectra indicated that the hydrogen bond of SPI was destroyed and blue shifted with the addition of SY. What's more, the absolute value of Zeta potential, solubility, and hydrophobicity all increased, while the particle size decreased. As a result of molecular docking, surface hydrogen bonds, Van der Waals forces and hydrophobic interactions are the main driving forces. The addition of SY and SPI improved the specific volume and texture of angel cake. This study shows that SY has the potential to be developed into a new type of blowing agent.
Recent progress on Pickering emulsions stabilized by polysaccharides-based micro/nanoparticles

Bo Pang,Huan Liu,Kai Zhang

DOI: https://doi.org/10.1016/j.cis.2021.102522

IF: 15.19

2021-10-01

Advances in Colloid and Interface Science

Abstract:Pickering emulsions stabilized by micro/nanoparticles have attracted considerable attention owing to their great potential in various applications ranging from cosmetic and food industries to catalysis, tissue engineering and drug delivery. There is a growing demand to design "green" micro/nanoparticles for constructing stable Pickering emulsions. Micro/nanoparticles derived from the naturally occurring polysaccharides including cellulose, chitin, chitosan and starch are capable of assembling at oil/water interfaces and are promising green candidates because of their excellent biodegradability and renewability. The physicochemical properties of the micro/nanoparticles, which are determined by the fabricating approaches and/or post-modification methods, have a significant effect on the characteristics of the final Pickering emulsions and their applications. Herein, recent advances on Pickering emulsions stabilized by polysaccharides-based micro/nanoparticles and the construction of functional materials including porous foams, microcapsules and latex particles from these emulsions as templates, are reviewed. In particular, the effects of micro/nanoparticles properties on the characteristics of the Pickering emulsions and their applications are discussed. Furthermore, the obstacles that hinder the practical applications of polysaccharides-based micro/nanoparticles and Pickering emulsions as well as the prospects for the future development, are discussed.

chemistry, physical
Effect of diacylglycerol on partial coalescence of aerated emulsions: Fat crystal-membrane interaction and air-liquid Interface interaction insights

Pengkai Xie,Yilan Zheng,Yee-Ying Lee,Shuo Zou,Yuxin Wu,Junqi Lai,Yong Wang,Zhen Zhang

DOI: https://doi.org/10.1016/j.foodchem.2024.140879

2024-08-13

Abstract:Currently, the poor whipping capabilities of anhydrous milk fat (AMF) in aerated emulsion products are a major obstacle for their use in beverages like tea and coffee, as well as in cakes and desserts, presenting fresh hurdles for the food industry. In this study, the mechanism of action of diacylglycerols (DAGs) with different carbon chain lengths and degrees of saturation on the partial coalescence of aerated emulsions was systematically investigated from three fundamental perspectives: fat crystallization, air-liquid interface rheology, and fat globule interface properties. The optimized crystallization of long carbon chain length diacylglycerol (LCD) based on stearate enhances interactions between fat globules at the air-liquid interface (with an elastic modulus E' reaching 246.42 mN/m), leading to a significantly reduced interface membrane strength. This promotes fat crystal-membrane interactions during whipping, resulting in a thermally stable foam structure with excellent shaping capability due to enhanced partial coalescence of fat globules. Although Laurate based medium carbon chain length diacylglycerol (MCD) promoted fat crystallization and optimized interface properties, it showed weaker foam properties because it did not adequately encapsulate air bubbles during whipping. Conversely, oleate long carbon chain length diacylglycerol (OCD) proved to be ineffective in facilitating fat crystal-membrane interaction, causing foam to have a subpar appearance. Hence, drawing from the carefully examined fat crystal-membrane interaction findings, a proposed mechanism sheds light on how DAGs impact the whipping abilities of aerated emulsions. This mechanism serves as a blueprint for creating aerated emulsions with superior whipping capabilities and foam systems that are resistant to heat.
Preparation and characterization of Pickering emulsion gel stabilized by WPI/SPI composite particles and encapsulation of milk-derived peptide FDRPFL

Aidi Sun,Wenming Dong,Siyu Li,Aixiang Huang,Xuefeng Wang

DOI: https://doi.org/10.1016/j.lwt.2024.116093

2024-04-19

Abstract:In this study, Pickering emulsion (PE) stabilized by whey protein isolate/soybean protein isolate (WPI/SPI) composite particles were used as a template to construct Pickering emulsion gel (PEG). The results showed that the PE stabilized by WPI/SPI composite particles had good centrifugal and storage stability at 4 °C (at least 4 months). Furthermore, When SA concentration was 3% and PE:SA ratio of 5:1, the obtained PEG with water-in-oil type exhibited a smaller droplet size, a denser network structure, and solid-like behavior in the linear viscoelastic region using a laser particle size analyzer, rheometer, and confocal laser scanning microscopy. Moreover, the increase of hydrogen bonds after SA addition confirmed that increased of β-sheet in WPI/SPI by Fourier-transform infrared spectroscopy, as β-sheet structure was stabilized by interchain hydrogen bonds, thus forming a denser network structure. In addition, PEGs could effectively encapsulate peptide FDRPFL, with a highest encapsulation efficiency of 72.8%. In vitro digestion behavior revealed that PEGs could improve the bioaccessibility of peptide FDRPFL and mainly followed the release mechanism of non-Fickian superstate II. Taken together, the present findings provide a theoretical framework for the development and application of PEGs stabilized by WPI/SPI composite particles.
Monodisperse Plant Protein Nanoparticles Prepared by Cation-Exchange Resins for Stabilization of Pickering Emulsions

Pengcheng Xu,Chen Lin,Xuyuan Li,Yuxi Shen,Zhenyun Chen,Wei Feng,Ren Wang,Zhengxing Chen,Tao Wang,Bernard P. Binks

DOI: https://doi.org/10.1021/acs.langmuir.3c01871

IF: 3.9

2023-09-28

Langmuir

Abstract:Our understanding of the microstructure of many plant proteins is based on the ancient and conventional methods of alkali extraction and acid precipitation, which generate considerable amounts of NaCl causing salting-out effects and aggregation of their molecules. In this study, monodisperse rice protein (RP) nanoparticles were prepared using cation-exchange resins that release H<sup>+</sup> and absorb Na<sup>+</sup>, thus avoiding the generation of NaCl during neutralization of the alkali extracts. The generated RP nanoparticles of small diameter (20 nm) and excellent uniformity (0.17 polydispersity) quickly diffuse to and stabilize the oil-water interface, producing oil-in-water Pickering emulsions. The emulsifying ability and emulsion stability afforded with these nanoparticles were 17 and 3.5 times higher than those of nanoparticles prepared by conventional alkali extraction and acid precipitation methods, respectively. Furthermore, increased RP nanoparticle concentration created more stable emulsions with smaller droplets and reduced flocculation index vital for practical applications. This study provides a convincing example of how to prepare monodisperse protein nanoparticles that adsorb at a fluid interface, which may find numerous applications in food and cosmetic formulations.

chemistry, multidisciplinary, physical,materials science
Pickering Emulsions and Antibubbles Stabilized by PLA/PLGA Nanoparticles

Rodrigo Araya-Hermosilla,Flora Dervillé,Nicolás Cohn-Inostroza,Francesco Picchioni,Paolo P Pescarmona,Albert Poortinga

DOI: https://doi.org/10.1021/acs.langmuir.1c02320

IF: 3.9

2022-01-11

Langmuir

Abstract:Micrometer-sized double emulsions and antibubbles were produced and stabilized via the Pickering mechanism by colloidal interfacial layers of polymeric nanoparticles (NPs). Two types of nanoparticles, consisting either of polylactic acid (PLA) or polylactic-co-glycolic acid (PLGA), were synthesized by the antisolvent technique without requiring any surfactant. PLA nanoparticles were able to stabilize water-in-oil (W/O) emulsions only after tuning the hydrophobicity by means of a thermal treatment. A water-in-oil-in-water (W/O/W) emulsion was realized by emulsifying the previous W/O emulsion in a continuous water phase containing hydrophilic PLGA nanoparticles. Both inner and outer water phases contained a sugar capable of forming a glassy phase, while the oil was crystallizable upon freezing. Freeze drying the double emulsion allowed removing the oil and water and replacing them with air without losing the three-dimensional (3D) structure of the original emulsion owing to the sugar glassy phase. Reconstitution of the freeze-dried double emulsion in water yielded a dispersion of antibubbles, i.e., micrometric bubbles containing aqueous droplets, with the interfaces of the antibubbles being stabilized by a layer of adsorbed polymeric nanoparticles. Remarkably, it was possible to achieve controlled release of a flourescent probe (calcein) from the antibubbles through heating to 37 °C leading to bursting of the antibubbles.
Investigations on the Influencing Mechanisms of SiO 2 Nanoparticles on Foam Stability

Jing Wang,Yv Chen,Shun Wang,Huiqing Liu,Fengming Zhao

DOI: https://doi.org/10.1021/acs.energyfuels.1c02975

2021-11-23

Abstract:Foam stability is significantly important for enhancing oil recovery and sequestration of carbon dioxide underground. Nanoparticles have been widely used to improve foam stability, but traditional experiments cannot well reveal the mechanisms of nanoparticles on stabilizing foams and the interactions among nanoparticles, surfactants, and liquid films. In order to clarify the mechanisms of enhancing foam stability by nanoparticles, the adsorption behaviors of nanoparticles with different modification degrees on the liquid film and the effects of different compounded systems of nanoparticles and surfactants on the foam stability were studied by molecular simulation. Moreover, the foam stability of the compounded systems was evaluated by experiments. The results show that the foam stability of single nanoparticles increases first and then decreases with the increase of hydrophobic properties. The electrically charged properties of nanoparticles can significantly affect the foam stability of the compound system with nanoparticles and surfactants. The electrostatic repulsion between hydrophilic nanoparticles and anionic surfactants results in irregular arrangement of surfactants in the liquid film, which reduces foam stability. On the contrary, the electrostatic attraction between cationic surfactants and hydrophilic nanoparticles can promote the orderly arrangement of cationic surfactants and thus enhance the foam stability. Amphiphilic nanoparticles can interact with anionic or cationic surfactants, which not only strengthens the regular arrangement of surfactants on the interface but also fills the interface cavity and improves the foam stability. In addition, the experimental results show that there is an optimal ratio between nanoparticles and surfactants. Nanoparticles can reduce the foaming volume to a certain extent, but appropriate nanoparticles can effectively prolong the foam half-life. This study elucidates the mechanism of the nanoparticles/surfactant system in enhancing foam stability and provides an important theoretical basis and guidance for nanoparticle modification and optimization of foam flooding.

energy & fuels,engineering, chemical
Gelatin-Based Nanocomplex-Stabilized Pickering Emulsions: Regulating Droplet Size and Wettability through Assembly with Glucomannan.

Jieyu Zhu,Qingrong Huang,Yike Jiang,P. Shao,W. Jin,Bin Li

DOI: https://doi.org/10.1021/acs.jafc.6b04146

IF: 6.1

2017-02-10

Journal of Agricultural and Food Chemistry

Abstract:Particle size and surface wettability play leading roles in the distribution of particles on the oil-water interface and the stability of emulsions. This work utilized nanocomplexes assembled from gelatin and tannic acid to stabilize Pickering emulsions. The sizes and surface wettability of particles were further regulated by using a polysaccharide. The sizes of nanocomplexes ranged from 205.8 to 422.2 nm and increased with the addition of polysaccharide. Their contact angles decreased from 84.1° to 59.3°, revealing their hydrophilic nature. Results of fluorescence microscopy and cryo-scanning electron microscopy indicated that nanocomplexes were located at the oil-water interface. Interfacial shear and dilatational rheological data revealed a fast and irreversible adsorption behavior, which differed from rearrangement of gelatin molecules at the oil-water interface. The minimal concentration of nanocomplexes required to stabilize emulsions was 0.1 wt %. Our results demonstrated that protein-polyphenol-polysaccharide nanocomplexes had the potential to be applied to form stable surfactant-free food emulsions for the delivery of nutraceuticals.

Chemistry,Medicine,Materials Science
Pickering-stabilized emulsion gels fabricated from wheat protein nanoparticles: Effect of pH, NaCl and oil content

Yu Qing Zhu,Xing Chen,David Julian McClements,Liqiang Zou,Wei Liu

DOI: https://doi.org/10.1080/01932691.2017.1398660

2017-12-26

Journal of Dispersion Science and Technology

Abstract:A novel Pickering-stabilized emulsion gel with controlled rheological properties was derived from wheat gliadin nanoparticles-stabilized emulsions by altering preparation conditions (pH, ionic strength or oil content). The formed nanoparticles were relatively small uniform spheres particles (d < 120 nm), whose surface potential (ζ-potential) changed from +9.9 mV to −14.19 mV with the pH of the solution increased from 3.5 to 9. The isoelectric point of gliadin nanoparticles was around pH 6.8. The nanoparticles were highly susceptible to aggregation at pH values near their isoelectric point due to a reduction of electrostatic repulsion between them. Pickering-stabilized emulsions could be formed by blending the nanoparticles with oil and water, and Pickering-stabilized emulsion gels were obtained by altering pH, ionic strength or oil content of the dispersions. Creaming stabilities and rheological properties of the emulsion gels were modulated. Stable Pickering-stabilized emulsion gels with relatively large elastic modulus were formed with 70% oil content at pH 5.5 and 6.0 in the absence of NaCl. The viscosity increased with the increasing of oil content and salt concentration, and the viscosity enhanced when the pH around the isoelectric point. These results may facilitate the design of novel viscoelastic emulsion gels with the Pickering-stabilize mechanism which are suitable for utilizing in foods and other products.

chemistry, physical
Stability mechanism of Pickering emulsions co-stabilized by protein nanoparticles and small molecular emulsifiers by two-step emulsification with different adding sequences: From microscopic to macroscopic scales

Song Cui,Zhenyu Yang,David Julian McClements,Xingfeng Xu,Xin Qiao,Liyang Zhou,Qingjie Sun,Bo Jiao,Qiang Wang,Lei Dai

DOI: https://doi.org/10.1016/j.foodhyd.2022.108372

IF: 10.7

2022-12-06

Food Hydrocolloids

Abstract:Pickering emulsions are increasingly being explored for their potential applications within the food industry. However, the stability of these emulsions is often limited when stabilized by single colloidal particles. Herein, we examined the possibility of improving the performance of Pickering emulsions by using a combination of colloidal particles (zein nanoparticles, Z) and small molecular emulsifiers (quillaja saponin, Q). The stability mechanism of Pickering emulsions was explored from microscopic to macroscopic scales using QCM-D, microrheology and Cyro-SEM, et. Corn oil-in-water Pickering emulsions were prepared by adding the Z and Q in different sequences: (i) mix Z and Q and then homogenize ("ZQ-P′′); (ii) add Z, homogenize, and then add Q ("Z-QP"); (iii) add Q, homogenize, and then add Z ("Q-ZP"). The sequence significantly influenced the interfacial structure and properties of Pickering emulsions. Macroscopic rheology and microrheology showed that the Pickering emulsions formed an elastic-like structure (G'>G′′) and their viscoelastic properties increased over time. QCM-D analysis showed that the properties of the interfacial layers depended on the emulsifier addition sequence used to form the Pickering emulsions. The interfacial membranes formed using the Q-ZP sequence were the thickest (5.8 nm). Cyro-SEM imaging showed that nanoparticle bridges formed between neighboring droplet surfaces, which led to the formation of a 3D network that provided mechanical strength. Overall, this study showed that the Q-ZP addition sequence was the most effective at forming stable Pickering emulsions. It provides new insights that may facilitate the formation of plant-based Pickering emulsions with improved functional performance in food applications.

food science & technology,chemistry, applied

IS Degrees - Sociotechnical or Technosocial?

Enhancing Foam Stability with Β-Lactoglobulin Nanoparticles: Insights into Molecular-Level Interplay and Stabilization Mechanism

Stabilization of Pickering Foams by High-Aspect-Ratio Nano-Sheets

Preparation, Characterization, and Foaming Properties of Soy Protein Nanoparticles by the Cross-Linking Reaction Induced by Microbial Transglutaminase

The shaman told me so!

Effect of surfactants on the interfacial behaviors of diacylglycerol-based solid lipid nanoparticles and physical stability of W/O emulsion

Immune response to non-O157 Vero toxin-producing Escherichia coli in patients with hemolytic uremic syndrome.

Physical stability and rheological behavior of Pickering emulsions stabilized by protein–polysaccharide hybrid nanoconjugates

Synergistically stabilized wet foams from heat treated β-lactoglobulin and cellulose nanofibrils and their application for green foam production

Microstructure, Rheology, and Creaming Stability of Pickering Emulsions Stabilized with SPI‐Soy Peptide Nanoparticle Complex

Use of glycopyrrolate in the treatment of meniere's disease

Polyphenol improve the foaming properties of soybean isolate protein: Structural, physicochemical property changes and application in angel cake

Recent progress on Pickering emulsions stabilized by polysaccharides-based micro/nanoparticles

Effect of diacylglycerol on partial coalescence of aerated emulsions: Fat crystal-membrane interaction and air-liquid Interface interaction insights

Preparation and characterization of Pickering emulsion gel stabilized by WPI/SPI composite particles and encapsulation of milk-derived peptide FDRPFL

Monodisperse Plant Protein Nanoparticles Prepared by Cation-Exchange Resins for Stabilization of Pickering Emulsions

Pickering Emulsions and Antibubbles Stabilized by PLA/PLGA Nanoparticles

Investigations on the Influencing Mechanisms of SiO 2 Nanoparticles on Foam Stability

Gelatin-Based Nanocomplex-Stabilized Pickering Emulsions: Regulating Droplet Size and Wettability through Assembly with Glucomannan.

Pickering-stabilized emulsion gels fabricated from wheat protein nanoparticles: Effect of pH, NaCl and oil content

Stability mechanism of Pickering emulsions co-stabilized by protein nanoparticles and small molecular emulsifiers by two-step emulsification with different adding sequences: From microscopic to macroscopic scales