Abstract:Refractory organics in industrial wastewater are difficult to treat and pose a serious threat to the environment. Upflow anaerobic reactors such as upflow anaerobic sludge blanket (UASB) and internal circulation (IC) reactors are most widely used in the world due to high efficiency, but the inside process remains unknown like a black box. In this study, spatial mass transfer conditions of a pilot-scale UASB reactor, being decomposed as the bottom, middle and top zones, treating pharmaceutical wastewater at organic loading rates (OLR) of 4.32-8.30 kg COD/(m(3).d) were investigated. In addition, the roles of external and internal factors such as organic loading rate and granule properties including size, density, porosity and permeability on mass transfer were investigated for the first time. The average molecular diffusion rates (F-MD) of reactor were 7.43 x 10(-8),1.4 x 10(-7), 2.0 x 10(-7) and 2.73 x 10(-7) mg/s respectively, while, average convective diffusion rates (F-CD) were 5.39 x 10(-1), 1.09, 1.32 and 1.42 mg/s at OLRs of 4.32, 5.70, 6.92 and 8.30 kg COD/(m(3).d) respectively. Interestingly, mass transfer rates increased with the increase of OLR and decreased with a height of the reactor, also, it is directly dependent on granule size. The novel results reveal that the bottom zone is of the fastest mass transfer as compared to middle and top zones of the reactor; furthermore, it is the main degradation zone due to not only high mass transfer but also low feed/sludge and high granule level. The performance of upflow reactors could be enhanced for higher biogas production by installation of biofilm zone in the top zone to replace granules of that zone. The results could facilitate understanding bioprocess in upflow reactors. (C) 2018 Elsevier Ltd. All rights reserved.

Computational fluid dynamics study on first reaction chamber of internal circulation anaerobic reactor

Multi-scale Characteristics and Gas-Solid Interaction among Multiple Beds in a Dual Circulating Fluidized Bed Reactor System

Computational Fluid Dynamics Simulations and Experimental Validation of Macromixing and Flow Characteristics in Low-Density Polyethylene Autoclave Reactors

Improvement of Inner Components in Biological Fluidized Bed Reactors for Wastewater Treatment

Hydrodynamic Characteristics of Internal-Loop Granular Sludge Bed Nitrifying Reactor

The Impact of Water Distribution System on the Internal Flow Field of EGSB by Using CFD Simulation

[Research on Critical Aerating Flux of Internal-Loop Granular Sludge Bed Nitrifying Reactor].

Experimental and Numerical Analysis of the Hydrodynamic Behaviors of Aerobic Granules

Novel separate aeration self-circulating technology for continuous aerobic granular sludge process: Performance evaluation, hydrodynamic simulation and control strategy

Numerical Simulation and Models of Gas-stirred Anaerobic Digester by CFD

Divergence of Granular Sludges and Microbial Communities in Two Types of Anaerobic Reactors Treating Different Wastewaters.

Characteristics of Granular Sludge of the Internal Circulation Anaerobic Expanded Bed Reactor

Microscale Hydrodynamic Analysis of Aerobic Granules in the Mass Transfer Process

Performance of Anaerobic Granular Sludge Bed Reactor with Biogas Recirculation

Novel Insight of Spatial Mass Transfer Conditions of Upflow Anaerobic Reactor

Study on the treatment of corn alcohol wastewater by the internal circulation anaerobic reactor

Multiscale Hydrodynamic Investigation to Intensify the Biogas Production in Upflow Anaerobic Reactors

STUDY ON THE HYDRODYNAMICS CHARACTERISTICS OF EXTERNAL-LOOP AIRLIFT SLURRY REACTORS

Modelling the three‐phase flow in a pilot‐scale airlift internal‐loop reactor for wastewater treatment

Comparison and Optimization of Continuous Flow Reactors for Aerobic Granule Sludge Cultivation from the Perspective of Hydrodynamic Behavior

Research and application of anaerobic granular sludge suspended bed reactor