Abstract:Hip and knee joint replacements are common and largely successful procedures that utilise implants to restore mobility and relieve pain for patients suffering from e.g. osteoarthritis. However, metallic ions and particles released from both the bearing surfaces and non-articulating interfaces, as in modular components, can cause hypersensitivity and local tissue necrosis, while particles originating from a polymer component have been associated with aseptic loosening and osteolysis. Implant coatings have the potential to improve properties compared to both bulk metal and ceramic alternatives. Ceramic coatings have the potential to increase scratch resistance, enhance wettability and reduce wear of the articulating surfaces compared to the metallic substrate, whilst maintaining overall toughness of the implant ensuring a lower risk of catastrophic failure of the device compared to use of a bulk ceramic. Coatings can also act as barriers to inhibit ion release from the underlying material caused by corrosion. This review aims to provide a comprehensive overview of wear-resistant coatings for joint replacements - both those that are in current clinical use as well as those under investigation for future use. While the majority of coatings belong predominantly in the latter group, a few coated implants have been successfully marketed and are available for clinical use in specific applications. Commercially available coatings for implants include titanium nitride (TiN), titanium niobium nitride (TiNbN), oxidized zirconium (OxZr) and zirconium nitride (ZrN) based coatings, whereas current research is focused not only on these, but also on diamond-like-carbon (DLC), silicon nitride (SiN), chromium nitride (CrN) and tantalum-based coatings (TaN and TaO). The coating materials referred to above that are still at the research stage have been shown to be non-cytotoxic and to reduce wear in a laboratory setting. However, the adhesion of implant coatings remains a main area of concern, as poor adhesion can cause delamination and excessive wear. In clinical applications zirconium implant surfaces treated to achieve a zirconium oxide film and TiNbN coated implants have however been proven comparable to traditional cobalt chromium implants with regards to revision numbers. In addition, the chromium ion levels measured in the plasma of patients were lower and allergy symptoms were relieved. Therefore, coated implants could be considered an alternative to uncoated metal implants, in particular for patients with metal hypersensitivity. There have also been unsuccessful introductions to the market, such as DLC coated implants, and therefore this review also attempts to summarize the lessons learnt.

Feasibility of using diamond-like carbon films in total joint replacements: a review

Tribological Properties of Diamond-Like Carbon Films Deposited by Vacuum Arc

Diamond-like Carbon Film and Its Application on Articular Surface of Artificial Joint for Increasing Wear Resistance

Wear and corrosion properties of diamond like carbon (DLC) coating on stainless steel, CoCrMo and Ti6Al4V substrates

Tribocorrosion Behavior of Dlc-Coated Cocrmo Alloy in Simulated Biological Environment

Current status and future potential of wear-resistant coatings and articulating surfaces for hip and knee implants

In Vitro and In Vivo Evaluation of Toxicity of Structurally Different Diamond-Like Carbon Wear Debris in Joint Replacements

Diamond-like Carbon (DLC) As a Biocompatible Coating in Orthopaedic and Cardiac Medicine

The application and research progress of diamond-like carbon films in the field of artificial j oints

Nano-scratch and Fretting Wear Study of DLC Coatings for Biomedical Application

Tribological study of lubricious DLC biocompatible coatings

Diamond-like carbon coatings enhance scratch resistance of bearing surfaces for use in joint arthroplasty: hard substrates outperform soft

Improving the Protective Properties of an Artificial Joint Friction Couple by Using TiN and DLC Films

Preparation and Characterization of Diamond-like Carbon Coatings for Biomedical Applications—A Review

Effect of aqueous solution and load on the formation of DLC transfer layer against Co-Cr-Mo for joint prosthesis.

Evaluation of the Size-Dependent Cytotoxicity of DLC (diamondlike Carbon) Wear Debris in Arthroplasty Applications

Biological responses of diamond-like carbon (DLC) films with different structures in biomedical application.

Comprehensive structural, nanomechanical and tribological evaluation of silver doped DLC thin film coating with chromium interlayer (Ag-DLC/Cr) for biomedical application

Improvement of corrosion resistance and biocompatibility of 316L stainless steel for joint replacement application by Ti-doped and Ti-interlayered DLC films

Mechanical and Biological Characteristics of Diamond-Like Carbon Coated Poly Aryl-Ether-ether-ketone.

Retrospective lifetime estimation of failed and explanted diamond-like carbon coated hip joint balls