Abstract:Plastic production has experienced a significant increase in the last sixty years due to its cost-efficiency and adaptable characteristics, leading to the extensive use of additives to improve its performance and longevity. Due to the high demand for plastic, plastic waste production has increased, contaminating the environment and living beings by leaching additives, among other substances. Pyrolysis stands out among recycling techniques because it can handle mixed polymer waste feedstock. However, understanding the pyrolyzates distribution of additives is fundamental to assessing pyrolysis process of plastic waste. This study investigated the pyrolysis product distributions of two commonly used antioxidants, namely, Irgafos 168 and zinc stearate (ZnSt), using one-dimensional gas chromatography equipped with a quadruple mass spectrometer (GC-MS) and two-dimensional gas chromatography coupled to flame ionization detector and time-of-flight mass spectrometer (GC×GC-FID/TOF-MS). While GC separation technique provided limited information on product distribution, GC×GC offered enhanced resolution and identification of the decomposition products. In the pyrolysis of Irgafos 168 at 550 °C, GC identified 18 products, while GC×GC identified 198 products, representing an increase of approximately 11-fold. Similarly, for ZnSt, GC identified 67 products, while GC×GC identified 434 products, representing a 6-fold increase. GC×GC identified decomposition products from 15 different chemical classes for Irgafos 168 and 16 chemical classes for ZnSt, compared to 4 and 11 chemical classes identified by GC, respectively. Phenols and their derivatives were the major chemical class in the decomposition products of Irgafos 168 with a yield of 9.51 wt.%. In contrast, olefinic products were the dominant ones for ZnSt, with a yield of 9.73 wt.%. The major decomposition product of Irgafos 168 and ZnSt was 2‑tert‑butyl‑methylphenol (C11H16O) and C6 olefin (C6H12) with yields of 3.88 wt.%, and 1.13 wt.%, respectively. Utilizing the GC×GC separation method improved the ability to identify decomposition products, which can ultimately lead to a better understanding of antioxidant degradation that occurs during the pyrolysis process. GC×GC also provided thorough characterization of minor and co-eluted products along with major antioxidant degradation products. Additionally, the decomposition product distribution of Irgafos 168 and ZnSt was also compared with the primary antioxidants, Irganox 1010, Irganox 1076, and BHT, studied in part 1. The analysis indicated that the olefinic chemical class was the predominant one in Irganox 1010, Irganox 1076, and ZnSt, while ketones were the major chemical class in the decomposition of BHT and phenolics had the highest yield in Irgafos 168.

Comparative analysis of additive decomposition using one-dimensional and two-dimensional gas chromatography: Part I - Irganox 1010, Irganox 1076, and BHT

Comparative analysis of additive decomposition using one-dimensional and two-dimensional gas chromatography: Part II - Irgafos 168 and zinc stearate

Investigating primary decomposition of polypropylene through detailed compositional analysis using two-dimensional gas chromatography and principal component analysis

Comparison of Antioxidants to Increase the Oxidation Stability of Pyrolysis Oils of Three Plastics Using Iodine Value

Detailed compositional characterization of plastic waste pyrolysis oil by comprehensive two-dimensional gas-chromatography coupled to multiple detectors

Oxidative Degradation Products Analysis of Polymer Materials by Pyrolysis Gas Chromatography–mass Spectrometry

Thermo‐oxidative degradation of additive free polyethylene. Part I. Analysis of chemical modifications at molecular and macromolecular scales

A study on the decomposition pathways of HTPB and HTPE pyrolysis by mass spectrometric analysis

Quantification of the composition of pyrolysis oils of complex plastic waste by gas chromatography coupled with mass spectrometer detector

Influence of Binary Combined Systems of Antioxidants on the Stabilization of Peroxide‐cured Low‐density Polyethylene

Online TG-FTIR-MS Analysis of the Catalytic Pyrolysis of Polyethylene and Polyvinyl Chloride Microplastics

The Effects of Polyolefin Structure and Source on Pyrolysis-Derived Plastic Oil Composition

Migration of antioxidant additives from various polyolefinic plastics into oleaginous vehicles

The behavior of heteroatom compounds during the pyrolysis of waste composite plastics

Analysis and Control of Products Obtained From Pyrolysis of Polypropylene Using A Reflux Semi-batch Reactor and GC-MS/FID and FT-ICR MS

Exploring molecular composition of upgraded pyrolysis bio-oil using GC×GC-(EI/PI)-TOF MS with different column set-ups

Advanced Chemical Characterization of Pyrolysis Oils from Landfill Waste, Recycled Plastics, and Forestry Residue

GC investigation of post-irradiation oxidation phenomena on polypropylene

Analysis of autoxidized fats by gas chromatography-mass spectrometry: VIII. Volatile thermal decomposition products of hydroperoxy cyclic peroxides

Kinetics, Product Evolution, and Mechanism for the Pyrolysis of Typical Plastic Waste

Origin of Hydrogen in Aromatic and Olefin Products Derived from (Al-) Mcm-41 Catalyzed Co-Pyrolysis of Glucose and Polypropylene Via Isotopic Labeling