Abstract:The article describes the technological principles of ensuring the durability of bus bodies. Features of technologies on increase of corrosion resistance of bodies of buses of public transport are resulted. The basic tendencies at the modern enterprises on improvement of anticorrosive protection and manufacturing of bodies of buses are considered. New materials for the manufacture of bus bodies are presented. The application of new technologies in the production of small-class bus bodies was introduced in Ukraine in the late 1990s. This was a design development of OJSC «Ukravtobusprom», which was used at OJSC «Cherkasy Bus» since the beginning of production of «Bogdan» buses. The body of the bus «Bogdan» A091, in the process of improvement, received a non-seeded structure, which had a number of significant advantages. The use of glued front and rear fiberglass panels on these buses has significantly increased the corrosion resistance of the bus body. To protect against corrosion of the side panels began to use steel sheets with double-sided galvanizing, which were welded to the uncovered frame of the body. With further improvement of the technology of corrosion protection, the body frame was completely covered with anti-corrosion, highly adhesive soil. In the places of welding of the cladding panels, the frame pipes are covered with heat-resistant conductive soil. Today, galvanized side panels are glued to JSC «Cherkasy Bus» in the production of «Ataman» A092H6/16 buses, which has significantly reduced the number of corrosion cells. At JSC «Ukravtobusprom» the technology of facing of a body provides even less use of steel elements. On TUR A407 and TUR A303 buses, the cladding is made of composite materials (so-called ecobond sheet), which is glued to the frame using Sika technology. Constant improvement of technologies of anticorrosive protection of bodies of buses promotes increase of durability in realities of operation in our state. Because quite often, as real practice shows, operating organizations do not take measures to eliminate the effects of corrosion until the manifestations of structural corrosion, which make it impossible to further operate the bus.

Comparative Analysis of Coatings Applied for Anti-Corrosion Protection of Public Transport Vehicles' Structural Parts

The Comparative Analysis of the Coatings Deposited on the Automotive Parts by the Cataphoresis Method

Research on testing methods for the corrosion resistance of paint coatings

A Review of Recent Developments in Coating Systems for Hot-Dip Galvanized Steel

COMPARATIVE EVALUATION OF SEVERAL EXTERNAL COATINGS FOR OIL TANKS

Effect of Corrosion Protection Method on Properties of RSW and RFSSW Lap Joints Applied in Production of Thin-Walled Aerostructures

Artificial Weathering Test Methods of Waterborne Acrylic Coatings for Steel Structure Corrosion Protection

Corrosion failure analysis and solutions of aluminum alloy gas path plate used in sanding device of high-speed train

Analysis of Primary Coating Thickness Effects on Adhesion Strength in S355J2+N Steel Material

THE INFLUENCE OF THE ENVIRONMENT ON THE BEARING STRUCTURES OF PASSENGER CARS

The Influence of Heat Treatment on Corrosion Resistance and Microhardness of Hot-Dip Zinc Coating Deposited on Steel Bolts

Analysis of compliance of experimental steels for railway rails with modern standards of Ukraine and the EU

Microstructural, Corrosion Resistance, and Tribological Properties of Al2O3 Coatings Prepared by Atmospheric Plasma Spraying

Research on the Durability and Reliability of Industrial Layered Coatings on Metal Substrate Due to Abrasive Wear

Surface studies of corrosion-preventing coatings for aluminum alloys

COMPREHENSIVE EVALUATION FOR ANTICORROSIVE PROPERTIES OF HEAVY- DUTY COATING SEBF/SLF APPLIED TO TYPICAL AIRCRAFT STRUCTURES

Comparative Studies of Microstructural, Tribological and Corrosion Properties of Plated Zn and Zn-alloy Coatings

Analysis of corrosive properties of zinc-containing coatings based on dispersed waste hot zinc plating

Technological principles for providing the durability of bus bodies in the production process

Method of equivalent research of typical automotive parts

Corrosion Resistant Coatings and Paints