Abstract:BackgroundPrecious objects made of silver and/or its alloys tarnish and become black when exposed to ambient atmospheres containing moisture and ppb-amounts of H2S. Such objects usually contain small but variable amounts of copper as alloying constituent and this affects the corrosion process due to a preferential oxidation of copper. However the visual appearance of the formed tarnishing layers on different types of silver alloys is very similar. Therefore, conservators-restorers are confronted with the problem that in some cases certain cleaning techniques are very effective while in other similar cases the removal of tarnishing layers is unsatisfactory. Since cleaning experiments are not allowed on genuine objects, many investigations use artificially corroded dummies instead. In order to evaluate the representativity and reproducibility of this often used methodology, differences in morphology, microstructure and composition of the sulfide layers on sterling silver generated by different sulfidation methods were analysed.ResultsSterling silver samples were artificially aged in five different environments. The samples exposed to uncontrolled ambient air at different locations (e.g. residential and laboratory environments) showed different corrosion rates and corrosion colours. Three accelerated ageing methods were executed in a gaseous or liquid environment under controlled conditions. These tests showed different results in morphology, microstructure, composition, thickness and the interface between bulk and corrosion layer. A first accelerated sulfidation procedure in a Na2S solution alternated with exposure to air, resulted in a fast corrosion rate and an even corrosion layer formation with several S-species. A second series of sulfidation in a controlled gas environment of H2S and SO2 developed a thin but uneven corrosion layer, mainly consisting of oxides. A third corrosion methodology used was based on the thioacetamide method. This resulted in an even and relative thick corrosion layer, comparable to the Na2S/aeration sulfidation system. However, the interface between the corrosion layer and the bulk is importantly different, showing severe voids.ConclusionsThe corrosion layers generated by five different experimental sulfidation series on identical prepared sterling silver coupons were clearly different from each other. Analyses demonstrated that the composition and microstructure of the corrosion layers were strongly dependent on the sulfidation method used and copper was found to be an important element present in all sulfide layers analysed. Therefore, artificially corroded sterling silver is not necessarily representative for naturally tarnished historical objects and the extrapolation of the cleaning results obtained on dummies to historical objects must be performed with care.

Analysis of the Ag M4,5 EELS edge to study silver nanoparticle corrosion

Electrochemical synthesis of silver oxide nanowires, microplatelets and application as SERS substrate precursors

Electrochemically Prepared Porous Silver and Its Application in Surface-Enhanced Raman Scattering

High Resolution Stem-Eels Study of Silver Nanoparticles Exposed to Light and Humic Substances

Surface studies of corrosion in second surface silver heliostat mirrors

Stability Limits and Surface Chemistry of Ag Nanoparticles in Non-Adsorbing Electrolytes Probed by Bragg Coherent Diffractive Imaging

Scanning Electrochemical Cell Microscopy: A Powerful Method to Study the Intergranular Corrosions of Archaeological Silver Artifacts

Comparative evaluation of corrosion effects between nanocrystalline silver alloy and tradition gold stacks using spring probe contacts

Surface Vs. Bulk Electronic Structure of Silver Determined by Photoemission

Corrosion characterization of durable silver coatings by electrochemical impedance spectroscopy and accelerated environmental testing

Application of the analytical methods REM/EDX, AES and SNMS to a chlorine induced aluminium corrosion

Correlated Anodic-Cathodic Nanocollision Events Reveal Redox Behaviors of Single Silver Nanoparticles.

Unveiling Corrosion Pathways of Sn Nanocrystals through High-Resolution Liquid Cell Electron Microscopy

Effect of oxidation on surface-enhanced Raman scattering activity of silver nanoparticles: a quantitative correlation

Corrosion resistance and electrochemical evaluation of silver mirrors

Sub-monolayer Silver Loss from Large Gold Nanospheres Detected by Surface Plasmon Resonance in the Sigmoidal Region

Spectroscopic analyses of particle and energy aggregations at the interface of silver nanoparticles and fluorescent carbon nanodots

Determining oxidation states of transition metals in molten salt corrosion using electron energy loss spectroscopy

Electroless silver as an optical coating in an operational environment

Single-Particle Electrochemical Imaging Provides Insights into Silver Nanoparticle Dissolution at the Solution–Solid Interface

The sulfidation process of sterling silver in different corrosive environments: impact of the process on the surface films formed and consequences for the conservation-restoration community