Abstract:Recent studies in hydrometallurgy are focused on developing eco-friendly and selective leach agents such as organic acids. These agents can extract metal ions, which are usually separated through precipitation methods. When traditional methods are used, the separation is complex and time-consuming, and each metal cation is required to be isolated separately. Moreover, extracted metal salts are subsequently recombined in the regeneration of cathode materials. To simplify this, a novel simultaneous precipitation approach has been developed, allowing the separation of metal salts that can directly contribute to regenerating novel cathode materials, bypassing the need for separate isolation. This study aimed to recover cobalt, nickel, and manganese from the organic leach solution of spent lithium-ion batteries (LIBs) through co-precipitation of metal oxalates. The investigation includes the selection of organic acids and the best parameters for the leaching process, as well as testing different molar ratios of the metals M2+ (M = Co, Ni, Mn) to oxalic acid (1:3, 1:4.5, 1:6, and 1:7.5) to examine the effects of the precipitating agent on the recovery percentages of the metals. The findings indicate that 2 M citric acid and 4 vol% H2O2 is the optimal parameter in the leaching process. Meanwhile, in the co-precipitation process, an increase in the molar ratio leads to a corresponding rise in the resulting metal recoveries. At the ratio of 1:7.5, cobalt, nickel, and manganese were recovered to the extent of 99.26%, 98.93%, and 94.01%, respectively. Nevertheless, at the increased molar ratio, the co-extraction of lithium and aluminum was observed, resulting in reduced selectivity and decreased precipitate purity.

Organic acid-mediated leaching kinetics study and selective extraction of Mo, V, and Ni from spent catalysts

Leaching of Nickel and Cobalt from a Mixed Nickel-Cobalt Hydroxide Precipitate Using Organic Acids

Leaching Vanadium from the Spent Denitration Catalyst in the Sulfuric Acid/Oxalic Acid Combined Solvent

Extensive investigation on extraction and leaching kinetics study of Cu and Cr from spent catalyst using acetic acid

Alkali extraction of valuable metals from spent Mo–Ni/Al 2 O 3 catalyst

Bioleaching kinetics and multivariate analysis of spent petroleum catalyst dissolution using two acidophiles

Stepwise separation and recovery of molybdenum, vanadium, and nickel from spent hydrogenation catalyst

Kinetics of Nickel Leaching from Roasting-Dissolving Residue of Spent Catalyst with Sulfuric Acid

Separation and Recovery of Vanadium, Nickel, and Aluminum from Acid Leaching Solution of Spent Hydrodesulfurization Catalyst by a Solvent Extraction-Oxalic Acid Precipitation Process

Co-Precipitation of Metal Oxalates from Organic Leach Solution Derived from Spent Lithium-Ion Batteries (LIBs)

Sustainable recovery of valuable metals from spent lithium-ion batteries using DL-malic acid: Leaching and kinetics aspect

Dissolution kinetics of spent petroleum catalyst using sulfur oxidizing acidophilic microorganisms

Optimization of two-step bioleaching of spent petroleum refinery catalyst by Acidithiobacillus thiooxidans using response surface methodology

Selective leaching of nickel and cobalt from sintered nickel alloy by oxygen pressure acid leaching process

Sustainable recovery of nickel, molybdenum, and vanadium from spent hydroprocessing catalysts by an integrated selective route

Recovery of Mo and Ni from spent acrylonitrile catalysts using an oxidation leaching–chemical precipitation technique

Evaluation of molybdenum recovery from sulfur removed spent catalyst using leaching and solvent extraction

Efficient and Selective Recovery of Mo and V from Spent Hydrodesulfurization Catalysts Via Oxidation Roasting Followed by Na2CO3 and NaOH Leaching

Investigations on the Extraction of Molybdenum and Vanadium from Ammonia Leaching Residue of Spent Catalyst

Recovery of Lithium, Nickel, Cobalt, and Manganese from Spent Lithium-Ion Batteries Using L-Tartaric Acid As a Leachant

Comprehensive Recovery of Vanadium and Molybdenum from Ammonia Leaching Residue of Spent Catalyst