Abstract:Cementitious materials are used to construct an engineered barrier in repositories for radioactive waste. The cement matrix may contain a variety of organic compounds, some of which are polymeric admixtures used as plasticizers. Superplasticizers (SPs) are highly effective organic cement additives for reducing water amount, increasing workability, homogeneity, plasticity and the non-segregation of mortars and grouts, improving mechanical properties and resistance to destructive environments. SPs in cement could have an impact on the long-term safety of the disposals of radioactive waste. These organic agents can leach from the cementitious matrix into groundwater and may affect the migration behaviour of radionuclides. The detailed chemical composition and other characteristics of the cement (CEM I 42.5 R, Sweden) used for the leaching experiments were evaluated. It contained mainly CaO (52.51 ± 1.37, %), and the surface area of the cement particles was 13.2 ± 1.3 m2/g. An insignificant increase in pH (from 12.6 ± 0.1 to 12.8 ± 0.1) was observed for the leachates over 10 days. A commercially available cement superplasticizer based on polymelamine sulphonate (PMS) Peramin SMF10 (Peramin AB, Sweden) was chosen for the research. The product's chemical composition was analysed using wavelength-dispersive X-ray fluorescence (WD-XRF) spectroscopy, while other physico-chemical properties of the PMS superplasticizer were assessed by Raman spectroscopy and thermo-gravimetric analysis. In aqueous solutions and powders of PMS, the same most intensive features were observed at 774 cm−1 (ring out-of-plane deformation), 977 cm−1 (C-N-C bending, SO stretching) and 1055 cm−1 (C-N=C bending) in the Raman spectra. At up to 270 °C, the polymer was thermally stable. Raman and UV/Vis spectroscopies were used to assess the rate of the alkaline degradation of PMS superplasticizer in different aqueous solutions. No changes were observed in the hydrolytic solutions with any of the above analytical methods over a period of 3 years. The results obtained revealed a good thermal and chemical stability (in highly alkaline media, pH = 9.9–12.9) of the PMS polymer.

Cement pastes containing air entraining agent release the biocide octylisothiazolinone posing ecotoxicological effects

Use of admixtures in organic-contaminated cement-clay pastes

Enhanced Carbonation Curing of Cement Pastes with Dolomite Additive

Health Risk Assessment of Ecological Cement in Feed Water Systems

Effect of an Early-Age Exposure on the Degradation Mechanisms of Cement Paste under External Sulfate Attack

Effects of Organic Matter Components and Incubation on the Cement-Based Stabilization/solidification Characteristics of Lead-Contaminated Soil

Long-term leaching test of organo-contaminated cement-clay pastes

Immobilization of organic pollutants in cement pastes admixed with organophilic materials

Effects of EDTA on the leaching behaviors of Cs(I) and Co(II) from cement waste forms

Do new cement-based mortars pose a significant threat to the aquatic environment?

Effect of Ornamental Stone Waste Incorporation on the Rheology, Hydration, Microstructure, and CO2 Emissions of Ordinary Portland Cement

Evaluation of Physico-Chemical Characteristics of Cement Superplasticizer Based on Polymelamine Sulphonate

Assessment of the long-term leaching characteristics of cement-slag stabilized/solidified contaminated sediment

Influence of phosphogypsum purification with lime on the properties of cementitious matrices with and without plasticizer

Cementitious Behavior of Argon Oxygen Decarburization Stainless Steel Slag and Its Stabilization on Chromium

Degradation resistance of different cementitious materials to phosphoric acid attack at early stage

Effect of Phaeodactylum Tricornutum in Seawater on the Hydration of Blended Cement Pastes

Comparison of thermogravimetry response of alkali-activated slag and Portland cement pastes after stopping their hydration using solvent exchange method

Evaluation of Calcium Oxide Nanoparticles from Industrial Waste on the Performance of Hardened Cement Pastes: Physicochemical Study

Encapsulation of iodine-loaded adsorbents in blended Portland cement and geopolymer wasteforms

Study on the Binding Behavior of Chloride Ion and Ettringite in Nano-Metakaolin Cement by Seawater Mixing and Curing Temperatures