2D array imaging system for mechanically-steered, forward-viewing ultrasound guidewire

Adeoye Olomodosi,Stephan Strassle Rojas,Phuong Vu,Brooks D Lindsey
DOI: https://doi.org/10.1016/j.ultras.2024.107398
IF: 4.2
Ultrasonics
Abstract:Approximately 4 million people with peripheral artery disease (PAD) present with critical limb ischemia each year, requiring urgent revascularization to avoid loss of limb. Minimally-invasive (i.e. endovascular) revascularization is preferable due to increased recovery time and increased risk of complications associated with open surgery. However, 40% of people with PAD also have chronic total occlusions (CTOs), resulting in > 20% of revascularization procedures failing when CTOs are present. A steerable robotic guidewire with integrated forward-viewing imaging capabilities would allow the guidewire to navigate through tortuous vasculature and facilitate crossing CTOs in revascularization procedures that currently fail due to inability to route the guidewire. The robotic steering capabilities of the guidewire can be leveraged for 3D synthetic aperture imaging with a simplified, low element count, forward-viewing 2D array on the tip of the mechanically-steered guidewire. Images can then be formed using a hybrid beamforming approach, with focal delays calculated for each element on the tip of the guidewire and for each physical location to which the robotically-steered guidewire is steered. Unlike synthetic aperture imaging with a steerable guidewire having only a single element transducer, an array with even a small number of elements can allow estimation of blood flow and physiological motion in vivo. A miniature, low element count 2D array transducer with 9 total elements (3 × 3) having total dimensions of 1.5 mm × 1.5 mm was designed to operate at 17 MHz. A proof-of-concept 2D array transducer was fabricated and characterized acoustically. The developed array was then used to image a wire target, a peripheral stent, and an ex vivo porcine iliac artery. Images were formed using the described synthetic aperture beamforming strategy. Acoustic characterization showed a mean resonance frequency of 17.6 MHz and a -6 dB bandwidth of 35%. Lateral and axial resolution were 0.271 mm and 0.122 mm, respectively, and an increase in SNR of 4.8 dB was observed for the 2D array relative to the single element case. The first 2D array imaging system utilizing both mechanical and electronic steering for guidewire-based imaging was developed and demonstrated. A 2D array imaging system operating on the tip of the mechanically-steered guidewire provides improved frame rate and increases field of view relative to a single element transducer. Finally, 2D array and single element imaging were compared for introduced motion errors, with the 2D array providing a 46.1% increase in SNR, and 58.5% and 17.3% improvement in lateral and axial resolution, respectively, relative to single element guidewire imaging.
What problem does this paper attempt to address?