Abstract:Recycled aggregate concrete, as a construction material, can be applied to structural components (beams, slabs, columns, and foundations), auxiliary components, and temporary facilities with strength grades ranging from C30 to C50. Today, the world is facing an increasing pressure of greenhouse gas emissions. Utilizing carbon dioxide for the curing of recycled aggregates contributes to achieving carbon reduction goals. Freeze damage can cause deterioration of mechanical properties and surface spalling of recycled aggregate concrete (RAC). This study investigated the influence of three different CO 2 curing methods, standard CO 2 curing (CC group), CO 2 curing with pre-saturated Ca(OH) 2 immersion (HH group), and whole specimen CO 2 curing (CRR group), on the properties of RAC subjected to freeze-thaw cycles. The results revealed that all the three CO 2 curing methods improved the peak stress and elastic modulus of RAC by 12.3–13.7 % and 19.2–31.5 %, respectively. The HH group suffered the least mass loss rate and experienced the most improvement in the relative dynamic modulus. The improvement in the RAC impermeability was in the descending order of HH group > CC group > CRR group. It should be pointed out that RAC with a lower initial water-cement (w/c) ratio exhibited better permeability resistance. Compared with the reference group, the CC, HH, and CRR groups showed a respective 49.0–58.7 %, 55.8–72.6 %, and 45.5–46.8 % reduction in the capillary water absorption coefficients after being subjected to different CO 2 curing methods. Among the three groups, the HH group with a w/c ratio of 0.35 and 0.55 showed better resistance to chloride ion penetration (which was further reduced by 9.4–31.6 % and 19.2–41.1 %, respectively).

Effect of Curing Age on Chloride Diffusion Coefficient of Recycled Aggregate Concrete Subjected to Compressive Stresses

Shrinkage and Creep of Sustainable Self-Compacting Concrete with Recycled Concrete Aggregates, Fly Ash, Slag, and Silica Fume

Effects of Packing on Compressive Behaviour of Recycled Aggregate Concrete

High-strain Rate Compressive Behavior of Concrete Made with Substituted Coarse Aggregates: Recycled Crushed Concrete and Clay Bricks

Properties of Recycled Aggregate Concrete with Different Water Control Methods

Flexural Behavior and Durability Properties of Recycled Aggregate Concrete (RAC) Beams Subjected to Long-Term Loading and Chloride Attacks

Five-phase Modelling for Effective Diffusion Coefficient of Chlorides in Recycled Concrete

Study On Relationship Between Chloride Diffusion In Concrete And Time

Performance of Recycled Concrete Beams under Sustained Loads Coupled with Chloride Ion (cl−) Ingress

Effect of Concrete Mixture Proportions on the Chloride Resistance

Theoretical and Experimental Investigation of Loading Effects on Chloride Diffusion in Saturated Concrete

Effects of CO 2 curing methods on frost resistance and mechanical properties of recycled aggregate concrete

Effecting Coefficients for Concrete Structure Durability Design Index

Experimental study on the capillary absorption of cement-based materials and analysis of influencing factors

Effect of steam curing system on compressive strength of recycled aggregate concrete

Chloride Penetration of Recycled Fine Aggregate Concrete under Drying–Wetting Cycles

Permeability Of Concrete With Recycled Concrete Aggregate And Pozzolanic Materials Under Stress

Investigation of the Time-Dependent Deformation of Recycled Aggregate Concrete in a Water Environment

Experimental Investigation and Analytical Modeling of Chloride Diffusivity of Fly Ash Concrete.

Chloride permeability of recycled aggregate concrete under the coupling effect of freezing-thawing, elevated temperature or mechanical damage

Effect of External Loads on Chloride Transport in Concrete