Abstract:Glycerol is a carbon source that produces good biomass under mixotrophic conditions. Enhancing the composition of culture media in algae biomass production improves growth rates, biomass yield, nutrient utilization efficiency, and overall cost-effectiveness. Among the key nutrients in the medium, nitrogen plays a pivotal role. Urea can be effectively used as a nitrogen source and is considered a low-cost form of nitrogen compared to other sources. Urea metabolism releases some CO2 in photosynthesis, and magnesium plays a major role in urea uptake. Magnesium is another key nutrient that is key in photosynthesis and other metabolic reactions. To maximize glycerol consumption in the mixotrophic system and to obtain high biomass and lipid productions, the variations in MgSO4·7H2O and urea concentrations were evaluated in the growth medium of the microalgae. A response surface methodology (RSM) using a central composite design (CCD) was designed to maximize glycerol consumption at the initial cellular growth rates (up to four days). The magnesium and urea supply varied from 0.3 to 1.7 g L−1. Response surface methodology was utilized to analyze the results, and the highest glycerol consumption rate, 770.2 mg L−1 d−1, was observed when C. vulgaris was grown at 1.7 g L−1 urea, 1.0 g L−1 MgSO4·7H2O. Using the optimal urea and magnesium concentrations with acetate, glucose, and glycerol as carbon sources, the same lipid content (10% average) was achieved on day 4 of mixotrophic C. vulgaris culture. Overall, the results show that mixotrophic growth of C. vulgaris using urea with an optimum magnesium concentration yields large amounts of fatty acids and that the carbon source greatly influences the profile of the fatty acids.
What problem does this paper attempt to address?
The problem that this paper attempts to solve is to optimize the growth of Chlorella vulgaris under mixotrophic conditions in order to maximize the glycerol consumption rate and increase biomass and lipid production. Specifically, through the Response Surface Methodology (RSM) and Central Composite Design (CCD), the researchers evaluated the effects of magnesium sulfate (MgSO₄·7H₂O) and urea concentrations on the glycerol consumption rate and determined the optimal medium components. In addition, the study also compared the effects of different carbon sources (acetate, glucose, and glycerol) on the nitrogen and phosphorus removal rates and fatty acid composition of Chlorella vulgaris under the optimal magnesium and urea concentrations.
### Research Background
1. **Microalgae Growth under Mixotrophic Conditions**
- Microalgae can grow under autotrophic, heterotrophic, or mixotrophic conditions. Under mixotrophic conditions, microalgae can utilize both light energy and organic carbon sources simultaneously, thereby increasing the production efficiency of biomass and lipids.
- In order to achieve large - scale mixotrophic cultivation, low - cost nutrient sources such as urea and glycerol need to be used.
2. **The Roles of Urea and Magnesium**
- Urea is a cheap nitrogen source, and CO₂ will be released during the metabolic process, which is helpful for photosynthesis.
- Magnesium is a key element in photosynthesis and other metabolic reactions, especially involved in the absorption and metabolism of urea.
### Research Objectives
1. **Evaluate the Effects of Magnesium and Urea Concentrations on the Maximum Glycerol Consumption Rate**
- Under the condition that glycerol concentration and light intensity are not limiting factors, study the effects of magnesium and urea concentrations on the glycerol consumption rate.
2. **Compare the Effects of Different Carbon Sources on Lipid Composition and Nitrogen and Phosphorus Removal Rates**
- Using acetate, glucose, and glycerol as carbon sources, compare the growth performance, lipid composition, and nitrogen and phosphorus removal rates of Chlorella vulgaris under the optimal magnesium and urea concentrations.
### Experimental Design
- **Response Surface Methodology (RSM)**
- Use Central Composite Design (CCD) for experimental design to evaluate the effects of magnesium and urea concentrations on the glycerol consumption rate.
- Two independent variables: magnesium (in the form of MgSO₄·7H₂O) and urea concentrations, which are changed at three levels (−1, 0, +1) respectively.
- A total of 13 experiments were carried out, among which 5 repeated experiments were used to evaluate pure error.
### Results
- **Regression Model and Statistical Analysis**
- The quadratic polynomial equation obtained by multiple regression analysis is:
\[
\text{Glycerol consumption rate} = 525.3+95.56\times\text{Urea}+5.51\times\text{Magnesium}+29.84\times\text{Urea}^2 - 74.24\times\text{Magnesium}^2+167.82\times\text{Urea}\times\text{Magnesium}
\]
- The model is statistically significant at the 95% confidence level (p < 0.05), and the R² value is 0.913, indicating that the model can explain 91.3% of the variation.
- **Optimal Conditions**
- When the urea concentration is 1.7 g/L and the magnesium concentration is 1.0 g/L, the glycerol consumption rate reaches the highest, which is 770.2 mg/L/d.
### Fatty Acid Composition
- **The Effects of Different Carbon Sources on Fatty Acid Composition**
- Under the optimal urea and magnesium concentrations, different carbon sources have significant effects on the fatty acid composition of Chlorella vulgaris.
- When glycerol, acetate, and glucose are used as carbon sources, the total lipid content is 10% (dry weight). However, the fatty acid composition is different:
- **Palmitic acid (C16:0)**: The main saturated fatty acid, with contents of 21.11% (acetate), 17.26% (glucose), and 27.82% (glycerol) respectively.
- **Oleic acid (C18:1)**: The content is the highest in acetate culture, which is 38%.
- **Linoleic acid (C18:2)**: The contents are relatively high in glucose and glycerol cultures, which are 38% and 30% respectively.
- **Unsaturated fatty acids**: The content is 78.89% in acetate culture and 82% in glucose culture.