Abstract:With the global production of 150 million tons in 2016, ethylene is one of the most significant building blocks in today's chemical industry. Most ethylene is now produced in cracking furnaces by thermal cracking of fossil feedstocks with steam. This process consumes around 8% of the main energy used in the petrochemical industry, making it the single most energy-intensive process in the chemical industry. This paper studies a tubular thermal cracking reactor fed by propane and the molecular mechanism of the reaction within the reactor. After developing the reaction model, the existing issues, such as the reaction, flow, momentum, and energy, were resolved by applying heat to the outer tube wall. After solving the entropy generation equations, the entropy generation ratio of the sources was evaluated. The temperature of the tube/reactor was tuned following the reference results, and processes were replicated for different states. The verification of the modeling and simulation results was compared with the industrial case. The Genetic Programming (GP) machine learning approach was employed to generate objective functions based on key decision variables to reduce the computational time of the optimization algorithm. For the first time, this study has proposed a systematic approach for optimizing a thermal cracking reactor based on a combination of Genetic Programming (GP), Water Cycle Algorithm (WCA), and Genetic Algorithm (GA). In this regard, multiobjective optimization was performed based on the maximization of the products and entropy generation with the generation of GP objective functions. The key decision variables in this study included inlet gas temperature, inlet gas pressure, air mass flow rate, and wall temperature. The results showed that the weighted percentage of products after optimization increased to 61.13% and the entropy production rate of the system decreased to 899.80 J/s, displaying an improvement of 0.85 and 16.51% compared with the base case, respectively, with the multiobjective GA algorithm. In addition, by applying the multiobjective WCA, the weighted percentage of products increased to 61.81%. The entropy production rate of the system decreased to 882.72 J/s. So, an improvement of 1.97% in weights of products and an improvement of 18.77% in entropy generation have been achieved compared with the base case.

Comparative study of artificial intelligence based multi‐modelling approach and optimization of photoreactor

Scalable Multi-Objective Optimization of Industrial Purified Terephthalic Acid (PTA) Oxidation Process

Modeling and multi-objective optimization of commercial ethylene oxide reactor to strike a delicate balance between profit and negative environmental impact

Predictive Biodegradation of Multiple Toxic Pollutants in Bioreactors Treating Real Wastewater using ANN and GP

Data-Based Modeling, Multi-Objective Optimization and Multi-Criteria Decision Making of a Catalytic Ozonation Process for Degradation of a Colored Effluent

Multi Objective Optimization using Non-Dominated Sort Genetic Algorithm with Artificial Neural Network for Reactive Dividing Wall Column

Optimization of heterogeneous continuous flow hydrogenation using FTIR inline analysis: a comparative study of multi-objective Bayesian optimization and kinetic modeling

Unveiling the potential of machine learning in cost-effective degradation of pharmaceutically active compounds: A stirred photo-reactor study

Optimization of the remediation of oil-drilling cuttings by combining artificial neural networks with knowledge-based models

Combining model structure identification and hybrid modelling for photo-production process predictive simulation and optimisation

Genetic‐based multi‐objective optimization of alkylation process by a hybrid model of statistical and artificial intelligence approaches

A novel combination of machine learning and intelligent optimization algorithm for modeling and optimization of green ammonia synthesis

Simultaneously maximizing microalgal biomass and lipid productivities by machine learning driven modeling, global sensitivity analysis and multi-objective optimization for sustainable biodiesel production

Optimization of photocatalytic oxidation reactor for air purifier design: Application of artificial neural network and genetic algorithm

Investigation and optimization of olefin purification in methanol-to-olefin process based on machine learning approach coupled with genetic algorithm

Development of a surrogate artificial neural network for microkinetic modeling: case study with the methanol synthesis

Gas–solid reactor optimization based on EMMS-DPM simulation and machine learning

Modeling and optimization of tannase production with Triphala in packed bed reactor by response surface methodology, genetic algorithm, and artificial neural network

Towards advanced bioprocess optimization: A multiscale modelling approach

Neural networks and genetic algorithm as robust optimization tools for modeling the microbial production of poly-β-hydroxybutyrate (PHB) from Brewers' spent grain

Optimization of a Thermal Cracking Reactor Using Genetic Algorithm and Water Cycle Algorithm