Abstract:In this study, a continuum damage mechanics (CDM) finite element (FE) model was developed to investigate the effects of surface roughness on rolling contact fatigue (RCF) life of non-conformal contacts. In order to assess the surface roughness of tribo-components, twelve deep groove rolling element bearings from various companies in different sizes were procured and measured using an optical surface profilometer. The roughness average (Ra) and the root mean square of surface roughness (RMS, σ) ranged from a low of 0.03, 0.05 µm to a high of 0.14, 0.20 µm, respectively. The number of peaks and valleys per 400 µm were measured and calculated. The number of peaks ranged from 11 to 31 (>99.5% Confidence Interval). The measured surfaces also revealed that a sinusoidal pattern can be used to accurately represent the surface patterns. The sinusoidal surface pattern was used to determine the elastohydrodynamic lubrication (EHL) pressure distribution between an equivalent rough surface in contact with a smooth surface. Four roughness amplitude were used to generate specific film thicknesses (λ-ratios) resulting in full to mixed EHL lubrication regimes. The EHL pressure distributions were replaced with representative symmetric Hertzian pressure distributions in order to remove the effect of asymmetry of an EHL pressure distribution. The resulting symmetric pressure distributions were used in a finite element continuum damage mechanics model to determine RCF life of machine elements operating in specific film thickness range of 1 < λ < 10. The RCF results from the FE model indicate that as roughness amplitude increases or lambda ratio decreases, the fatigue lives decrease for the various frequencies. Additionally, subsurface failure fatigue lives are reduced as roughness frequency increases regardless of amplitude or Hertzian pressure. The RCF results also indicate that for the low frequency pressure distribution the contact is most susceptible to surface failure, whereas for high frequency pressure distribution the contact resists surface failure. The results from this investigation were used to develop surface roughness effects for various RCF life equations commonly used in rolling element bearing application.

Measurement and Real Time Analysis of Local Damage in Wear-and-Fatigue Tests

Measurement and Real Time Analysis of Local Damage in Wear-and-Fatigue Tests

A Time-Frequency Based Approach for Acoustic Emission Assessment of Sliding Wear

A novel method for competitive failure behavior and mechanical degradation online monitoring of laser additive work roll under multidimensional damage

Wear Characterization under Sliding–rolling Contact Using Friction-Induced Vibration Features

A continuum damage mechanics finite element model for investigating effects of surface roughness on rolling contact fatigue

Experimental investigations to assess surface fatigue failure in rolling contact bearing

Study of the Plastic Behavior of Rough Bearing Surfaces Using a Half-Space Contact Model and the Fatigue Life Estimation According to the Fatemi–Socie Model

Using the Effect of Compression Stress in Fatigue Analysis of the Roller Bearing for Bimodal Stress Histories

Friction and Wear On-Line Monitoring and Wear Mechanism Analysis under Dynamic Loading Manners

New Tribological Aspects in the Micro-Areas of the Symmetric Rolling-Sliding Contact

Time-variant reliability analysis of angular contact ball bearing considering the coupled effect of rolling contact fatigue damage and wear

A Multi-Time Scale Approach to Remaining Useful Life Prediction in Rolling Bearing

In-situ Characterization of Three Dimensional Worn Surface under Sliding-Rolling Contact

Application of the S-N Curve Mean Stress Correction Model in Terms of Fatigue Life Estimation for Random Torsional Loading for Selected Aluminum Alloys

A Novel Signal Processing Method for Friction and Sliding Wear

Experimental study on wheel-rail rolling contact fatigue damage starting from surface defects under various operational conditions

A modified nonlinear fatigue damage accumulation model for life prediction of rolling bearing under variable loading conditions

The Contact Behavior Analysis Between Microcomponents on a Low-Frequency Reciprocating-Fretting Ball-on-Flat Tribometer

A 3D Finite Element Model of Rolling Contact Fatigue for Evolved Material Response and Residual Stress Estimation

An Efficient Numerical Model for Predicting the Torsional Fretting Wear Considering Real Rough Surface