Abstract:Introduction: Conservative endodontic cavity (CEC) may improve fracture resistance of teeth but compromise the instrumentation of canals. This study assessed the impacts of CEC on both variables in 3 tooth types. Methods: Extracted human intact maxillary incisors, mandibular premolars, and molars (n = 20/type) were imaged with micro-computed tomographic imaging (20-μm resolution) and assigned to CEC or traditional endodontic cavity (TEC) groups (n = 10/group/type). Minimal CECs were plotted on scanned images. Canals were prepared with WaveOne instruments (Dentsply Maillefer, Ballaigues, Switzerland) using 1.25% sodium hypochlorite and post-treatment micro-computed tomographic images obtained. The proportion of the untouched canal wall (UCW) and the dentin volume removed (DVR) for each tooth type was analyzed with the independent-samples t test. The 60 instrumented and 30 intact teeth (negative control, n = 10/type) were loaded to fracture in the Instron Universal Testing machine (Instron, Canton, MA) (1 mm/min), and the data were analyzed with 1-way analysis of variance and the Tukey test. Results: The mean proportion of UCW was significantly higher (P < .04) only in the distal canals of molars with CEC (57.2% ± 21.7%) compared with TEC (36.7% ± 17.2%). The mean DVR was significantly smaller (P < .003) for CEC than for TEC in incisors (16.09 ± 4.66 vs 23.24 ± 3.38 mm(3)), premolars (8.24 ± 1.64 vs 14.59 ± 4.85 mm(3)), and molars (33.37 ± 67.71 mm(3)). The mean load at fracture for CEC was significantly higher (P < .05) than for TEC in premolars (586.8 ± 116.9 vs 328.4 ± 56.7 N) and molars (1586.9 ± 196.8 vs 641.7 ± 62.0 N). In both tooth types, CEC did not differ significantly from the negative controls. Conclusions: Although CEC was associated with the risk of compromised canal instrumentation only in the molar distal canals, it conserved coronal dentin in the 3 tooth types and conveyed a benefit of increased fracture resistance in mandibular molars and premolars.

Comparative evaluation of the effects of different torque settings on dentinal crack formation using single- and multi-file system: An in vitro study

An in vitro comparative evaluation of dentinal crack formation caused by three different nickel-titanium rotary file systems in primary anterior teeth

Comparative evaluation of hand and rotary file systems on dentinal microcrack formation during pulpectomy procedure in primary teeth: an in vitro study

Effect of Different Nickel–Titanium Rotary Systems on Dentinal Crack Formation During Root Canal Preparation in Primary Molars: An in Vitro Study

Comparison of the incidences of apical root cracks after canal preparation with two nickel-titanium rotary systems:an in vitro study

Vertical root fracture resistance and dentinal crack formation of root canal-treated teeth instrumented with different nickel–titanium rotary systems: an in-vitro study

Microscopic Evaluation of Dentinal Defects after Root Canal Preparation with Different Hand and Nickel-Titanium Files; An In Vitro Study

Comparison of dentinal and apical crack formation caused by four different nickel-titanium rotary and reciprocating systems in large and small canals.

Incidence of apical crack formation and propagation during removal of root canal filling materials with different engine driven nickel-titanium instruments

Evaluation of apical root defects during canal instrumentation with two different nickel-titanium (NiTi) systems by optical coherence tomography (OCT) scan

Comparative Evaluation of Dentinal Defects After Root Canal Preparation Using Various Nickel Titanium Files: An In Vitro Study

Effect of several nickel-titanium rotary systems on stress distribution in mandibular molars under occlusal forces: a finite element analysis

Comparison of Dentinal Defects Induced by Rotary, Reciprocating, and Hand Files in Oval Shaped Root Canal - An In-Vitro Study

Comparative evaluation of remaining dentin thickness using single file, two file, and multiple rotary file system - An in vitro CBCT study

Effect of preset torque setting on torque/force generation, shaping ability and surface changes of nickel titanium rotary instrument in different root canal curvature locations: An ex vivo study

Comparative Evaluation of Stress Distribution Against the Root Canal Wall at Three Different Levels by Using TruNatomy, XP-endo Shaper, F360, and 2Shape Files-A Finite Element Analysis

Torque Generation of the Endodontic Instruments: A Narrative Review

Evaluation of Root Dentinal Damage Associated with ProTaper Gold, WaveOne Gold, and ProTaper Next during Cleaning and Shaping Procedures: An In vitro Analysis

Comparative Evaluation of Fracture Resistance of Endodontically Treated Teeth Instrumented With K3XF Rotary Files Using Different Tapers

Impacts of conservative endodontic cavity on root canal instrumentation efficacy and resistance to fracture assessed in incisors, premolars, and molars

Oval Root Canals Prepared With Two Different Endodontic Rotary Files: An In Vitro Study Comparing the Incidence of Dental Defects