Abstract:Bound extracellular polymeric substances (EPS) are complex, high-molecular-weight polymer mixtures that play a critical role in pore clogging, foulants adhesion, and fouling layer formation during membrane filtration, owing to their adhesive properties and gelation tendencies. In this study, a novel electrochemical anaerobic membrane bioreactor (EC-AnMBR) was constructed to investigate the effect of sludge bound-EPS solubilization on methane bioconversion and membrane fouling mitigation. During the 150-days' operation, the EC-AnMBR demonstrated remarkable performance, characterized by an exceptionally low fouling rate (transmembrane pressure (TMP) < 4.0 kPa) and high-quality effluent (COD removal > 98.2 %, protein removal > 97.7 %, and polysaccharide removal > 98.5 %). The highest methane productivity was up to 38.0 ± 3.1 mL/Lreactor/d at the applied voltage of 0.8 V with bound-EPS solubilization, 107.6 % higher than that of the control stage (18.3 ± 2.4 mL/Lreactor/d). Morphological and multiplex fluorescence labeling analyses revealed higher fluorescence intensities of proteins, polysaccharides, total cells and lipids on the surface of the fouling layer. In contrast, the interior exhibited increased compression density and reduced activity, likely attributable to compression effect. Under the synergistic influence of the electric field and bound-EPS solubilization, biomass characteristics exhibited a reduced propensity for membrane fouling. Furthermore, the bio-electrochemical regulation enhanced the electroactivity of microbial aggregates and enriched functional microorganisms, thereby promoting biofilm growth and direct interspecies electron transfer. Additionally, the potential hydrogenotrophic and methylotrophic methanogenesis pathways were enhanced at the cathode and anode surfaces, thereby increasing CH₄ productivity. The random forest-based machine learning model analyzed the nonlinear contributions of EPS characteristics on methane productivity and TMP values, achieving R² values of 0.879 and 0.848, respectively. Shapley additive explanations (SHAP) analysis indicated that S-EPSPS and S-EPSPN were the most critical factors affecting CH₄ productivity and membrane fouling, respectively. Partial dependence plot analysis further verified the marginal and interaction effects of different EPS layers on these outcomes. By combining continuous operation with interpretable machine learning algorithms, this study unveils the intricate impacts of EPS characteristics on methane productivity and membrane fouling behaviors, and provides new insights into sludge bound-EPS solubilization in EC-AnMBR.

Mechanistic insight into microbial interaction and metabolic pattern of anammox consortia on surface-modified biofilm carrier with extracellular polymeric substances

Insight into enrichment of anammox bacteria by a polyurethane sponge carrier coupled with iron-carbon micro-electrolysis under no strict anaerobic condition

Decoding the Role of Extracellular Polymeric Substances in Enhancing Nitrogen Removal from High-Ammonia and Low-C/N Wastewater in a Sequencing Batch Packed-Bed Biofilm Reactor

Rapid initiation of a single-stage partial nitritation-anammox process treating low-strength ammonia wastewater: Novel insights into biofilm development on porous polyurethane hydrogel carrier

Mechanistic insight into the aggregation ability of anammox microorganisms: Roles of polarity, composition and molecular structure of extracellular polymeric substances

Kinetic Characteristics and Microbial Community of Anammox-EGSB Reactor

Fast start-up of anammox process: Effects of extracellular polymeric substances addition on performance, granule properties, and bacterial community structure

Effects of extracellular polymeric substances (EPS) and N-acyl-L-homoserine lactones (AHLs) on the activity of anammox biomass

Potential coupling effects of ammonia-oxidizing and anaerobic ammonium-oxidizing bacteria on completely autotrophic nitrogen removal over nitrite biofilm formation induced by the second messenger cyclic diguanylate

[Environmental Factors Influence and Microbial Community Structure Analysis of Entrapped Anaerobic Ammonium Oxidizing Bacteria]

Anaerobic ammonium oxidation (anammox) promoted by pyrogenic biochar: Deciphering the interaction with extracellular polymeric substances (EPS)

Insight into nitrogen removal performance of anaerobic ammonia oxidation in two reactors: Comparison based on the aspects of extracellular polymeric substances and microbial community

Anammox Bacteria Enrichment and Denitrification in Moving Bed Biofilm Reactors Packed with Different Buoyant Carriers: Performances and Mechanisms.

High Adhesion Ability Of Anammox Granular Microbes Directly Revealed By Qcm-D Technique

Microbial interactions play a keystone role in rapid anaerobic ammonium oxidation sludge proliferation and biofilm formation

Formation mechanisms and assembly patterns of anammox biofilm induced by carrier type: Novel insights based on low-strength wastewater treatment

The superiority of hydrophilic polyurethane in comammox-dominant ammonia oxidation during low-strength wastewater treatment

Enhanced Microbial Metabolism in One Stage Partial Nitritation-Anammox System Treating Low Strength Wastewater by Novel Composite Carrier.

Sludge bound-EPS solubilization enhance CH4 bioconversion and membrane fouling mitigation in electrochemical anaerobic membrane bioreactor: Insights from continuous operation and interpretable machine learning algorithms

Iron-modified carriers accelerate biofilm formation and resist anammox bacteria loss in biofilm reactors for partial denitrification-anammox

Enhancing Biofilm Growth in an Integrated Fixed-Film Activated Sludge Process Through Modification of Polypropylene Carriers