Imagining Truly Open Access Bioethics: From Dreams to Reality

B. Williams-Jones,V. Couture,Renaud F. Boulanger,C. Dupras

DOI: https://doi.org/10.1080/15265161.2017.1365193

2017-10-03

Abstract:

What problem does this paper attempt to address?

Elimination of Bisphenol A with Visible Light-Enhanced Peroxydisulfate Activation Process Mediated by Fe3+-nitrilotriacetic Acid Complex.

Yan Xiao,Liangliang Xiong,Yin Xu,Hui Zhang

DOI: https://doi.org/10.1016/j.jhazmat.2022.129780

IF: 13.6

2022-01-01

Journal of Hazardous Materials

Abstract:In recent years, visible light assisted advanced oxidation processes (AOPs) are appealing in the elimination of pollutants. Herein, an innovative and eco-friendly visible light enhanced Fe3+-nitrilotriacetic acid system for the activation of peroxydisulfate (Vis/Fe3+-NTA/PDS) was proposed for the removal of bisphenol A (BPA). Fe3+-NTA could be dissociated through ligand-to-metal charge transfer (LMCT) to realize the generation of Fe2+ for the continuous activation of PDS to remove BPA. The use of 0.10 mM Fe3+, 0.10 mM NTA and 1.00 mM PDS led to 97.5% decay of 0.05 mM BPA and 66.3% of TOC removal in 30 min with the illumination of visible light at initial pH 3.0. The sulfate and hydroxyl radicals were proved to be the dominant species leading to BPA removal by means of radical scavenging experiments, radical probes and electron paramagnetic resonance (EPR) technique. The effects of various operating parameters, natural water constituents as well as different water matrices on BPA abatement were explored. The intermediate products of BPA degradation were identified and a possible transformation pathway was proposed. Briefly, this research provides an attractive strategy for the remediation of refractory wastewater using NTA assisted with visible light in the homogeneous Fe3+/PDS system.
Visible-Light-Induced Degradation Of Polybrominated Diphenyl Ethers With Agl-Tio2

Ying-Ying Shao,Wei-Dong Ye,Chun-Yan Sun,Chu-Lin Liu,Qi Wang

DOI: https://doi.org/10.1039/c7ra07106j

IF: 4.036

2017-01-01

RSC Advances

Abstract:As typical persistent organic pollutants, polybrominated diphenyl ethers (PBDEs) have aroused high environmental concern because of their toxicity and recalcitrant degradation. Here we report the visible-light-induced degradation of PBDEs with Agl-TiO2 (> 420 nm). A series of nano-structured Agl-TiO2 particles were synthesized by a deposition-precipitation method and characterized by SEM, TEM, XRD, XPS, BET and UV-Vis-DRS. The Agl-TiO2 hybrids showed high efficiency for degradation of PBDEs and excellent photostability in cyclic run experiments. The absorbance intensity and absorption ability of AgI-TiO2 hybrids and the properties of the solvents were found to greatly influence the efficiency of degradation of PBDEs. The 0.2-Agl-TiO2 (the mass ratio of Ag to P25 was about 20%) in CH3OH solution presented the highest reaction rate with 0.29 +/- 0.02 h(-1). Most interestingly, mechanistic pathways in the degradation of PBDEs were different under UV and visible light. Unlike the common single-electron transfer in the UV-TiO2 system, the debromination mechanism in the visible light/Agl-TiO2 system showed multi-electron transfer. The analysis of products showed that many different lower brominated congeners simultaneously appeared under visible light rather than being stepwise formed under UV. This implies that the special structure of Agl-TiO2 performs remarkably enhanced electron transfer, multi-electron transfer, and results in high photocatalytic activity. This research may provide a green and efficient method to remove halogenated pollutants by using visible light.
The Fat-like cadherin CDH-4 controls axon fasciculation, cell migration and hypodermis and pharynx development in Caenorhabditis elegans.

C. Schmitz,I. Wacker,H. Hutter

DOI: https://doi.org/10.1016/j.ydbio.2008.01.024

IF: 3.148

2008-04-15

Developmental Biology

Abstract:
Efficient degradation of bisphenol A over facilely optimized ternary Ag/ZnO/ZnAl‒LDH composite with enhanced photocatalytic performance under visible light irradiation

Jyunhong Shen,Antong Shi,Mengfan Wu,Hongyu Zhang,Zhuwu Jiang

DOI: https://doi.org/10.1016/j.solidstatesciences.2022.106992

IF: 3.752

2022-10-01

Solid State Sciences

Abstract:For the advanced treatment of micropollutants from wastewater, this study synthesized a ternary Ag/ZnO/ZnAl‒LDH composite photocatalyst with performance optimization based on the Taguchi approach. The optimal synthesis parameters were statistically determined as the Ag doping amount of 5 wt%, Zn2+ and Al3+ with a molar ratio of 3:1, Ag/ZnO and ZnAl‒LDH with composite ratio of 3:2, and PEG-200 dosage of 25 mL. The optimally synthesized Ag/ZnO/ZnAl‒LDH achieved the efficient degradation of bisphenol A (BPA) under visible light irradiation, and the reaction rate constant was about 4.8-, 2.2- and 12.0-fold higher than that of ZnO, Ag/ZnO and ZnAl‒LDH, respectively. As proved by various characterizations, the enhanced photocatalytic performance of Ag/ZnO/ZnAl‒LDH can be attributed to the improvements of optoelectronic properties, such as the widened visible light responsivity and facilitated charge transfer, thus resulting in a significant increase of hydroxyl radicals (·OH) formation. Fluorescence measurements and radical quenching experiments indicated that ·OH mainly contribute to the degradation of BPA, and the oxidation of H2O by holes was the dominant formation pathway. According to the above results, this study summarized and proposed the enhanced photocatalytic mechanism of Ag/ZnO/ZnAl‒LDH for ·OH production and BPA removal.

chemistry, physical, inorganic & nuclear,physics, condensed matter
Novel PtCu/MIL-101(Cr) for efficient degradation of bisphenol A: Photothermal synergism promoted by the localized surface plasmon resonance effect

Xiaodong He,Min Zhao,Weijin Yang,Yafei Li,Shihai Cui,Yi Wang,Jing Yang

DOI: https://doi.org/10.1016/j.apcata.2024.119968

IF: 5.723

2024-09-21

Applied Catalysis A General

Abstract:Semiconductor photocatalysis is one of the most useful methods to solve environmental pollution problems. Herein, nanomaterial PtCu/MIL-101(Cr) was produced by an improved hydrothermal technique. The composite exhibited excellent photocatalytic performance with 99.7% BPA degradation under 100 min visible light irradiation. First, the PtCu alloy has the effect of the local surface plasmon resonance effect, which can convert the photons to hot electrons and increase the reaction temperature. The synergistic effect (1+1>2) between photocatalysis and thermocatalysis significantly improved the photocatalytic efficiency. Second, the bimetallic alloying lowered the metals' work function and reduced the Schottky barrier between the PtCu alloy and MIL-101(Cr), which effectively promoted the carrier transfer. The ·O 2 - , ·OH and h + were dominant reactive substances in the degradation process. The intermediates and degradation pathways of BPA were analyzed by 3D-EEM. The reaction mechanism was proposed based on theoretical calculations and experimental analysis. This work provides new directions for designing photothermal synergistic green catalysts and purifying the environment.

chemistry, physical,environmental sciences
Sequential reduction-oxidation for photocatalytic degradation of tetrabromobisphenol A: kinetics and intermediates

Yaoguang Guo,Xiaoyi Lou,Dongxue Xiao,Lei Xu,Zhaohui Wang,Jianshe Liu

DOI: https://doi.org/10.1016/j.jhazmat.2012.09.044

2012-11-30

Abstract:C-Br bond cleavage is considered as a key step to reduce their toxicities and increase degradation rates for most brominated organic pollutants. Here a sequential reduction/oxidation strategy (i.e. debromination followed by photocatalytic oxidation) for photocatalytic degradation of tetrabromobisphenol A (TBBPA), one of the most frequently used brominated flame retardants, was proposed on the basis of kinetic analysis and intermediates identification. The results demonstrated that the rates of debromination and even photodegradation of TBBPA strongly depended on the atmospheres, initial TBBPA concentrations, pH of the reaction solution, hydrogen donors, and electron acceptors. These kinetic data and byproducts identification obtained by GC-MS measurement indicated that reductive debromination reaction by photo-induced electrons dominated under N(2)-saturated condition, while oxidation reaction by photoexcited holes or hydroxyl radicals played a leading role when air was saturated. It also suggested that the reaction might be further optimized for pretreatment of TBBPA-contaminated wastewater by a two-stage reductive debromination/subsequent oxidative decomposition process in the UV-TiO(2) system by changing the reaction atmospheres.
Photocatalysis of Bisphenol A by an Easy-Settling Titania/titanate Composite: Effects of Water Chemistry Factors, Degradation Pathway and Theoretical Calculation.

Xiao Zhao,Penghui Du,Zhengqing Cai,Ting Wang,Jie Fu,Wen Liu

DOI: https://doi.org/10.1016/j.envpol.2017.09.094

2017-01-01

Abstract:Bisphenol A (BPA) is a widely concerned endocrine disrupting chemical and hard to be removed through conventional wastewater treatment processes. In this study, we developed a TiO2 decorated titanate nanotubes composite (TiO2/TNTs) and used for photocatalytic degradation of BPA. TEM and XRD analysis show that the TiO2/TNTs is a nano-composite of anatase and titanate, with anatase acting as the primary photocatalytic site and titanate as the skeleton. TiO2/TNTs exhibited excellent photocatalytic reactivity and its easy-settling property leaded to good reusability. After 5 reuse cycles, TiO2/TNTs also could photo-degrade 91.2% of BPA with a high rate constant (k1) of 0.039 min-1, which was much better than TiO2 and TNTs. Higher pH facilitated photocatalysis due to more reactive oxygen species produced and less material aggregation. The presence of NaCl and CaCl2 showed negligible effects on BPA degradation, but NaHCO3 caused an inhibition effect resulting from consumption of ·OH. Humic acid inhibited degradation mainly due to blockage of the active sites of TiO2/TNTs. Degradation pathway was well interpreted through theoretical calculation. Hydroxyl radical played the dominate role in BPA photodegradation, and the atoms of BPA with high Fukui index based on density-functional theory (DFT) calculation are the radical easy-attacking (f0) sites. Considering the good photocatalytic reactivity, reusability, stability and settle property, TiO2/TNTs promises to be an efficient alternative for removal of organic compounds from wastewaters.
Corneal endothelial cell loss during phacoemulsification: Bevel‐up versus bevel‐down phaco tip

A. Faramarzi,M. Javadi,F. Karimian,M. Jafarinasab,A. Baradaran-Rafii,F. Jafari,M. Yaseri

DOI: https://doi.org/10.1016/j.jcrs.2011.05.034

2011-11-01

Abstract:
Efficient degradation of tetrabromobisphenol A using peroxymonosulfate oxidation activated by a novel nano-CuFe 2 O 4 @coconut shell biochar catalyst

Xinxin Li,Xujing Li,Chuang Song,Xiaojin Yang,Yanping Liu,Jia Zhu

DOI: https://doi.org/10.1016/j.envpol.2023.122488

IF: 8.9

2023-10-12

Environmental Pollution

Abstract:In this study, a novel bimetallic complexation–curing nucleation–anaerobic calcination method was developed to synthesize a nano-CuFe 2 O 4 @coconut shell biochar (CuFe 2 O 4 @CSBC) catalyst to activate peroxymonosulfate for degradation of tetrabromobisphenol A (TBBPA). The reaction processes of the TBBPA on CuFe 2 O 4 @CSBC have been investigated using in situ characterization and metal leaching. The effects of initial reaction conditions and degradation mechanism were investigated. Greater than 99% degradation of TBBPA at 10 mg L −1 was achieved in 30 min under the condition of pH 11, a total organic carbon removal rate of up to 70.67% was achieved and the degradation efficiency was 90% after 5 cycles of CuFe 2 O 4 @CSBC use. The degradation was in a second-order reaction at a constant of 0.797 M −1 min −1 (R 2 = 0.993). The degradation was attributed to the main active species (SO 4 · − ≈·OH < 1 O 2 ), and the surface active site of CuFe 2 O 4 @CSBC was the key role. The degradation process involved three main degradation pathways. Path A: ·OH attacked the C–Br bonds (TBBPA→TriBBPA→DBBPA→MBBPA→BPA); Path B: Hydroxylation and decarboxylation; Path C: Dehydrocoupling of TBBPA. What's more, the practical application of the system was very positive, achieved >77% degradation in sewage and industrial wastewater.

environmental sciences
The mechanism of photodegradation reaction of different dissociation forms of tetrabromobisphenol S in water with free radicals and the ecotoxicity evaluation of related products

Ying Lu,Se Wang

DOI: https://doi.org/10.1016/j.chemosphere.2024.141136

IF: 8.8

2024-01-09

Chemosphere

Abstract:Tetrabromobisphenol S (TBBPS) is a widely used brominated flame retardant that has attracted environmental concern due to its abundant presence in water. The objective of this study is to systematically analyze the direct photolysis and degradation mechanisms of TBBPS in two different dissociation forms in water, as well as to evaluate their toxicological effects induced by •OH, 1 O 2 , and •NO 2 radicals. The degradation mechanism of TBBPS is investigated with density functional theory (DFT) and time-dependent density functional theory (TDDFT) methods, and the toxicity of the degradation products is assessed through toxicological studies. The results of the study indicate that the OH-addition and H-abstraction reactions are favorable pathways for •OH-induced TBBPS degradation. The H-abstraction reaction of TBBPS 0 with •OH was more favorable than the •OH addition reaction. However, in the degradation of TBBPS − , the •OH addition reaction was favored over the H-abstraction reaction. Additionally, the indirect photolysis of TBBPS by 1 O 2 and •NO 2 in water was found to be easier for TBBPS − compared to TBBPS 0 , with degradation mechanisms involving Br-substitution and NO 2 -addition reactions. The higher E a values calculated indicate that the degradation of TBBPS by 1 O 2 and •NO 2 in water has been a secondary reaction. The direct photolysis reaction pathway of TBBPS in water has involved the cleavage of the S1–C7 and S1–C16 bonds. For TBBPS 0 in the S 1 /T 1 states, the primary reaction pathway is the cleavage of the S1–C16 bond, while for TBBPS − , the primary reaction pathway is the cleavage of the S1–C7 bond. Furthermore, the computational toxicology results indicate a slight increase in the toxicity levels of most products, highlighting the significance of investigating the degradation byproducts of TBBPS in greater detail.

environmental sciences
Visible Light Induced Photocatalytic Degradation of Br-Trihalomethanes over Polymer-Modified TiO2

Dongdong Zhang,Rongliang Qiu,Shizhong Wang

DOI: https://doi.org/10.4028/www.scientific.net/amr.726-731.2372

2013-01-01

Advanced Materials Research

Abstract:Under visible light irradiation, the photocatalytic degradation of Br-THMs was successfully achieved. It suggested that Br-THMs were de-bromized in a stepwise manner. The more bromine substituted in Br-THMs, the more easily it can be degraded, due to C-Br bond is easier destroyed than C-Cl. A proposed degradation pathway through a series of free radical reactions was also discussed.
Aqueous photodecomposition of the emerging brominated flame retardant tetrabromobisphenol S (TBBPS)

Haiyan Xu,Yueyue Li,Jiaxin Lu,Junhe Lu,Lei Zhou,Jean-Marc Chovelon,Yuefei Ji

DOI: https://doi.org/10.1016/j.envpol.2020.116406

IF: 8.9

2021-02-01

Environmental Pollution

Abstract:As an emerging brominated flame retardant (BFR), tetrabromobisphenol S (TBBPS) has been frequently detected in the environmental media and organisms. Knowledges on the transformation and fate of TBBPS in both environment and engineering systems are essential to its ecological risk assessment. Herein, we reported the photochemical decomposition of TBBPS in aqueous solution upon 254 nm ultraviolet irradiation (UV254). Results show that TBBPS was highly photoreactive, most likely due to the presence of four ortho-bromine substituents. The molar absorption coefficient and quantum yield of TBBPS were found to be pH-dependent, with the monoanionic form being most photoreactive. A series of photoproducts were identified by solid phase extraction (SPE) combined with liquid chromatography-electrospray ionization-triple quadrupole mass spectrometry (LC-ESI(+)-MS/MS. The photolysis of TBBPS likely proceeded through photonucleophilic substitution, photoreductive debromination, and β-scission reactions. A ketocarbene, possibly derived from the lower lying excited triplet state, was proposed to be involved in the photolysis of TBBPS. Ion chromatography analysis revealed that debromination occurred quickly, and the yield of bromide (Br−) approached 100% after 90 min irradiation. The presence of SRNOM and MRNOM inhibited the photodegradation rate of TBBPS, which is likely due to the light-screening and physical quenching effects of natural organic matter (NOM). Our results reveal that photolysis is an important process for the attenuation of TBBPS in aquatic system; however, naturally occurring species such as NOM can appreciably retard the decay of TBBPS.

environmental sciences
Optimisation of the size variation threshold for imaging evaluation of response in patients with platinum-refractory advanced transitional cell carcinoma of the urothelium treated with vinflunine.

K. Krajewski,R. Fougeray,J. Bellmunt,F. Pons,F. Schutz,J. Rosenberg,Y. Salhi,T. Choueiri

DOI: https://doi.org/10.1016/j.ejca.2011.11.018

IF: 10.002

2012-07-01

European Journal of Cancer

Abstract:
The Fate and Transformation of Tetrabromobisphenol A in Natural Waters, Mediated by Oxidoreductase Enzymes

Yiping Feng,Kun Lu,Shixiang Gao,Liang Mao

DOI: https://doi.org/10.1039/c6em00703a

2017-01-01

Environmental Science Processes & Impacts

Abstract:In this study, we examined the fate and transformation of tetrabromobisphenol A (TBBPA), mediated by the representative oxidoreductases (laccase and horseradish peroxidase (HRP)) in natural waters. Both enzymes could readily degrade TBBPA at environmentally relevant concentrations (e.g., 10 nmol L-1) in natural waters. After 2 hour treatment, 0.5-25% and 35-65% of TBBPA were degraded in municipal wastewater and natural surface waters by a laccase or HRP-catalyzed reaction, respectively. Enzyme kinetics evaluations indicated that the kCAT/KM ratio of HRP (1.01 μM-1 s-1) was much higher than that of laccase (0.032 μM-1 s-1) for TBBPA degradation, suggesting that the catalytic performance of HRP towards TBBPA was more efficient than that of laccase. The effects of pH and organic matter on the enzymatic degradation efficiency were explored. Organic matter in the water inhibited the enzymatic degradation efficiency and the degree of inhibition was proportional to the UV254 values of water. Product identification indicated that the product distribution of TBBPA at low concentration (10 nmol L-1) was similar to that of TBBPA at high concentration (10 μmol L-1). The degradation intermediates underwent further enzymatic reaction to yield higher molecular weight secondary products. Toxicity assessment showed that TBBPA toxicity was effectively eliminated by the oxidoreductase-catalyzed reaction.
Enhanced photoelectrocatalytic degradation of tetrabromobisphenol a from tip-decorated ZnO nanorod electrode with Bi2S3 nanoparticles

Xianglin Sun,Hao Wu,Yiming Tang,Zexiao Zheng,Yaping Li,Laisheng Li,Qiuyun Zhang

DOI: https://doi.org/10.1016/j.mssp.2021.105724

IF: 4.1

2021-06-01

Materials Science in Semiconductor Processing

Abstract:Tip-decorated ZnO/Bi2S3 photoelectrode was synthesized on a FTO substrate from chemical bath deposition and electrochemical deposition to investigate the photoelectrocatalytic (PEC) degradation of tetrabromobisphenol A (TBBPA). XRD, SEM, UV–vis and PL techniques were employed to evaluated the crystal structure, surface morphology, light absorbance properties and efficiency of carriers’ separation of the obtained electrode, respectively. The ZnO/Bi2S3 photoelectrode yielded a photocurrent density of 15.3 mA/cm2 upon ultraviolet and visible light irradiation, which was 6.6 and 10.9 times that of the original ZnO and Bi2S3, respectively. The enhanced photoelectrochemical properties is due to the improved light absorption of Bi2S3 nanoparticles and accelerated electron‐transfer pathway of ZnO nanorods. The stability of the photoelectrode was evaluated by recycling degradation experiments for 3 times. The intermediates of TBBPA degradation were also identified and a possible pathway was proposed.

engineering, electrical & electronic,materials science, multidisciplinary,physics, condensed matter, applied
How to write a research journal article in engineering and science 1

S. Socolofsky

Abstract:Writing a research article can be a daunting task, and often, writ- ers are not certain what should be included and how the information should be conveyed. Fortunately, scientific and engineering journal articles follow an accepted format. They contain an introduction which includes a statement of the problem, a literature review, and a general outline of the paper, a methods section detailing the methods used, separate or combined results, discussion and application sections, and a final summary and conclusions section. Here, each of these elements is described in detail using examples from the published literature as illustration. Guidance is also provided with respect to style, getting started, and the revision/review process.
Visible-light-driven photoelectrocatalytic activation of chloride by nanoporous MoS2@BiVO4 photoanode for enhanced degradation of bisphenol A

Zexiao Zheng,Yun Hau Ng,Yiming Tang,Yaping Li,Weirui Chen,Jing Wang,Xukai Li,Laisheng Li

DOI: https://doi.org/10.1016/j.chemosphere.2020.128279

IF: 8.8

2021-01-01

Chemosphere

Abstract:The massive emission of bisphenol A (BPA) has imposed adverse effects on both ecosystems and human health. Herein, nanoporous MoS2@BiVO4 photoanodes were fabricated on fluorine-doped tin oxide (FTO) substrates for photoelectrocatalytic degradation of BPA. The photocurrent density of the optimized photoanode (MoS2-3@BiVO4) was 5.4 times as that of BiVO4 photoanode at 1.5 V vs. Ag/AgCl under visible light illumination, which was ascribed to the reduced recombination of photogenerated charge carriers of the well-designed hybrid structure. 10 ppm of BPA could be completely degraded in 75 min by MoS2-3@BiVO4 photoanode, with a bias of 1.5 V vs. Ag/AgCl and 100 mM of NaCl as the supporting electrolyte. The electron paramagnetic resonance (EPR) and free radicals scavenging experiments confirmed that chlorine oxide radical (•ClO) played a dominant role in the degradation of BPA. 14 intermediates were detected and identified during photoelectrocatalytic degradation of BPA by MoS2-3@BiVO4 photoanode and 3 pathways were proposed based on the above intermediates. The hybrid film exhibited high stability and reusability, and promising application potential in photoelectrocatalytic degradation of organic pollutants in aqueous solution.

environmental sciences
Simulated Sunlight Photodegradation of Aqueous Phthalate Esters Catalyzed by the Polyoxotungstate/titania Nanocomposite

Lei Xu,Xia Yang,Yihang Guo,Fengyan Ma,Yingna Guo,Xing Yuan,Mingxin Huo

DOI: https://doi.org/10.1016/j.jhazmat.2010.02.049

IF: 13.6

2010-01-01

Journal of Hazardous Materials

Abstract:A series of porous polyoxotungstate/titania nanocomposites (PW(12)/TiO(2)) with particle size lower than 10nm and BET surface area of ca. 200 m(2)g(-1) was prepared by sol-gel chemistry combined with solvothermal treatment. The composites were successfully applied to the degradation of aqueous phthalate esters (PAEs) including di-n-butyl phthalate (DBP), diethyl phthalate (DEP), and dimethyl phthalate (DMP) under the simulated sunlight irradiation (lambda=320-680 nm) for the first time, and the conversion of DBP, DEP, and DMP reached to 98%, 84%, and 80%, respectively, after the simulated sunlight irradiation the suspension including PAE (5 mg L(-1), 100 mL) and PW(12)/TiO(2)-19.8 (100 mg) for 90 min. In addition, nearly total mineralization of DBP and DEP was realized by further increasing light irradiation time to 12h. Based on the intermediates identified in the reaction system, the photocatalytic degradation pathway of PAEs was put forward.
One-step synthesis of Cl(-)-doped Pt(IV)/Bi2WO6 with advanced visible-light photocatalytic activity for toluene degradation in air.

Zhuxing Sun,Xiaofang Li,Sen Guo,Haiqiang Wang,Zhongbiao Wu

DOI: https://doi.org/10.1016/j.jcis.2013.09.004

IF: 9.9

2013-01-01

Journal of Colloid and Interface Science

Abstract:In this study, Cl(-) doped Pt(IV)/Bi2WO6 photocatalyst was successfully synthesized via a one-step hydrothermal route by adding H2PtCl6 immediately in the reaction system. X-ray diffraction (XRD), transmission electron microscope (TEM), X-ray photoelectron spectroscopy (XPS), nitrogen adsorption-desorption isotherms and photoluminescence spectra (PL) were utilized to analyze the morphology, chemical states, surface area and optical properties of as-prepared catalysts. The addition of H2PtCl6 to the reaction system inhibited the growth of Bi2WO6 square nanoplates but facilitated the generation of irregular Bi2WO6 nanosheets with enlarged surface area and extended visible light absorption. In the resulted sample, it was observed that Pt(IV) was uniformly dispersed on the surface of Bi2WO6 irregular nanosheets and Cl(-) other than that from PtCl4 was doped into the sample by forming ionic bond with [Bi2O2](2+). Compared with pure Bi2WO6 nanosheets, Cl(-) doped Pt(IV)/Bi2WO6 showed enhanced activity in photocatalytic decomposition of toluene under visible light irradiation (420 nm<λ<780 nm). The catalyst with theoretical 1.0 wt.% Pt showed the best performance, which degraded 25 ppm toluene thoroughly in 35 min. Finally, the forming mechanism of Cl(-) doped Pt(IV)/Bi2WO6 in the one-step hydrothermal process was proposed.
Dual Channel Construction of WO3 Photocatalysts by Solution Plasma for the Persulfate-Enhanced Photodegradation of Bisphenol A

Jing Zhou,Xiaoqiang An,Qingwen Tang,Huachun Lan,Qiang Chen,Huijuan Liu,Jiuhui Qu

DOI: https://doi.org/10.1016/j.apcatb.2020.119221

2020-01-01

Abstract:A facile solution plasma method was used to activate the surface reactivity of photocatalysts. Take WO3 as an example, we found that reductive hydrogen radicals from electrical discharge were highly energetic and favored the formation of oxygen vacancies, whereas synergistic effect between these defects and plasma-activated water created abundant bridging hydroxyls via surface hydroxylation. When used for the removal of BPA pollutants, synergistic oxidation exhibited 6 and 12 times higher reaction rates than the individual persulfate oxidation and photodegradation, respectively. Surface activation of WO3 photocatalysts contributed to the 4-fold increase of the catalytic activity. Mechanism study demonstrated that oxygen vacancies and hydrated bridging hydroxyls provided unique channels for electron and hole extraction. The enhanced generation of oxidative species was responsible for the significantly increased photoactivity for bisphenol A (BPA) degradation. This work provides a versatile and universal strategy for the active site engineering of catalysts.

Imagining Truly Open Access Bioethics: From Dreams to Reality

Elimination of Bisphenol A with Visible Light-Enhanced Peroxydisulfate Activation Process Mediated by Fe3+-nitrilotriacetic Acid Complex.

Visible-Light-Induced Degradation Of Polybrominated Diphenyl Ethers With Agl-Tio2

The Fat-like cadherin CDH-4 controls axon fasciculation, cell migration and hypodermis and pharynx development in Caenorhabditis elegans.

Efficient degradation of bisphenol A over facilely optimized ternary Ag/ZnO/ZnAl‒LDH composite with enhanced photocatalytic performance under visible light irradiation

Novel PtCu/MIL-101(Cr) for efficient degradation of bisphenol A: Photothermal synergism promoted by the localized surface plasmon resonance effect

Sequential reduction-oxidation for photocatalytic degradation of tetrabromobisphenol A: kinetics and intermediates

Photocatalysis of Bisphenol A by an Easy-Settling Titania/titanate Composite: Effects of Water Chemistry Factors, Degradation Pathway and Theoretical Calculation.

Corneal endothelial cell loss during phacoemulsification: Bevel‐up versus bevel‐down phaco tip

Efficient degradation of tetrabromobisphenol A using peroxymonosulfate oxidation activated by a novel nano-CuFe 2 O 4 @coconut shell biochar catalyst

The mechanism of photodegradation reaction of different dissociation forms of tetrabromobisphenol S in water with free radicals and the ecotoxicity evaluation of related products

Visible Light Induced Photocatalytic Degradation of Br-Trihalomethanes over Polymer-Modified TiO2

Aqueous photodecomposition of the emerging brominated flame retardant tetrabromobisphenol S (TBBPS)

Optimisation of the size variation threshold for imaging evaluation of response in patients with platinum-refractory advanced transitional cell carcinoma of the urothelium treated with vinflunine.

The Fate and Transformation of Tetrabromobisphenol A in Natural Waters, Mediated by Oxidoreductase Enzymes

Enhanced photoelectrocatalytic degradation of tetrabromobisphenol a from tip-decorated ZnO nanorod electrode with Bi2S3 nanoparticles

How to write a research journal article in engineering and science 1

Visible-light-driven photoelectrocatalytic activation of chloride by nanoporous MoS2@BiVO4 photoanode for enhanced degradation of bisphenol A

Simulated Sunlight Photodegradation of Aqueous Phthalate Esters Catalyzed by the Polyoxotungstate/titania Nanocomposite

One-step synthesis of Cl(-)-doped Pt(IV)/Bi2WO6 with advanced visible-light photocatalytic activity for toluene degradation in air.

Dual Channel Construction of WO3 Photocatalysts by Solution Plasma for the Persulfate-Enhanced Photodegradation of Bisphenol A