A single-machine scheduling with a truncated linear deterioration and ready times

Chin-Chia Wu,Wen-Hsiang Wu,Wen-Hung Wu,Peng-Hsiang Hsu,Yunqiang Yin,Jianyou Xu

DOI: https://doi.org/10.1016/j.ins.2013.08.030

IF: 8.1

Information Sciences

Abstract:

What problem does this paper attempt to address?

In-situ constructing polyacrylamide interphase enables dendrite-free zinc anode in aqueous batteries

Xiaomin Zeng,Xiangjuan Meng,Wei Jiang,Min Ling,Lijing Yan,Chengdu Liang

DOI: https://doi.org/10.1016/j.electacta.2021.138106

IF: 6.6

2021-01-01

Electrochimica Acta

Abstract:Zinc metal featuring intrinsic safety, low cost, and high volumetric capacity is an attractive anode material in aqueous batteries. However, the practical application of Zinc-based batteries is seriously impeded by the uneven stripping/plating of zinc ions as well as low coulombic efficiency due to the side reaction at the electrode-electrolyte interface. Herein, polyacrylamide interphase is constructed via in-situ polymerization of acrylamide additive, which can constrain freely lateral diffusion of zinc ions and suppress parasitic reactions, endowing zinc anode with homogeneous nucleation and high coulombic efficiency. With this method, a stable metal-electrolyte interface can be formed and a prolonged lifespan of more than 680 h at 1 mA cm(-2) for 1 mA h cm(-2) can be obtained. (C) 2021 Published by Elsevier Ltd.
Anchoring Polyiodide to Conductive Polymers As Cathode for HighPerformance Aqueous Zinc-Iodine Batteries

Xiaomin Zeng,Xiangjuan Meng,Wei Jiang,Jie Liu,Min Ling,Lijing Yan,Chengdu Liang

DOI: https://doi.org/10.1021/acssuschemeng.0c05283

IF: 8.4

2020-01-01

ACS Sustainable Chemistry & Engineering

Abstract:Aqueous rechargeable zinc-iodine batteries are emerging high-safety and cost-effective technology for large-scale energy storage. However, the high solubility of discharge species polyiodide in aqueous electrolyte is the major challenge for iodine cathode. Herein, the polyiodide doped conductive polymer cathode is proposed to suppress the dissolution of active materials in electrolyte. High reversible capacity of 160 mAh/g and remarkable cycling stability with capacity retention of 79% after 700 cycles at 1.5 A/g are achieved.
Armoring the Cathode with Starch Gel Enables Shuttle-Free Zinc-Iodine Batteries

Na Wang,Yuanyuan Ma,Yunzhen Chang,Liping Feng,Huichao Liu,Boqiong Li,Wanxi Li,Yanyun Liu,Gaoyi Han

DOI: https://doi.org/10.1016/j.jcis.2024.03.149

IF: 9.9

2024-01-01

Journal of Colloid and Interface Science

Abstract:Zinc-iodine batteries (ZIBs) have been recognized as a promising energy storage device due to their high energy density, low cost and environmental friendliness. However, the development of ZIBs is hindered by the shuttle effect of polyiodides which results in capacity degradation and poor cycling performance. Inspired by the ability of starch to form inclusion compounds with iodine, we propose to use a starch gel on the cathode to suppress the shuttle of polyiodides. Herein, porous carbon is utilized as a host for iodine species and provides an excellent conductive network, while starch gel is used as another host to suppress polyiodides shuttle, resulting in improved battery performance. The test results demonstrate that the conversion between I-/I2/I3- in the cathode and the effective inclusion role of starch suppress the shuttle of polyiodides during the charging process. Meanwhile, based on the electrochemical tests and theoretical DFT calculations, it is found that starch has a stronger ability to adsorb polyiodides compared to carbon materials, which enables effective confinement of polyiodides. The ZIBs used the cathode with starch gel exhibit high coulombic efficiency (>95 % at 0.2 A/g) and low self-discharge (86.8 % after resting for 24 h). This strategy is characterized by its simplicity, low cost and high applicability, making it significant for the advancement of high-performance ZIBs.
Chemisorption Effect Enables High-Loading Zinc-Iodine Batteries

Jiafeng He,Hu Hong,Sanlue Hu,Xiliang Zhao,Guangmeng Qu,Lin Zeng,Hongfei Li

DOI: https://doi.org/10.1016/j.nanoen.2023.109096

IF: 17.6

2023-11-17

Nano Energy

Abstract:Rechargeable Zn-I 2 batteries featuring intrinsic safety and high energy density demonstrate promising energy storage prospects. However, the poor interface stability of the Zn anode and the undesirable shuttle effect severely hinder the device stability due to the diffusive characteristics of the soluble polyiodides in aqueous media. Here, a synergetic physicochemical strategy that combines physical constraints and chemical absorption was proposed by developing a composite host matrix with a core/porous-sheath structure, which can effectively confine iodine species. Initial I − ions bind securely with carboxylated multi-walled carbon nanotubes (c-MCNTs) to form the C–I bonds through chemical interactions. Furthermore, the pore structure of microporous carbon (MPC) not only restricts the iodine species in the pores through physisorption (secondary adsorption) but also facilitates the diffusion of Zn 2+ . The as-prepared carbon nanotubes coated with microporous carbon (glucose as the carbon source, and its ratio to CNT is 12:1) can serve as a host material (CNT@MPC12), and adsorb iodide ions to derive CNT@MPC12-I − . As a result, the developed aqueous Zn battery with CNT@MPC12-I − cathode delivers superior reversible rate capacity (0.35 mA h cm –2 at 20 mA cm –2 ) and remarkable cycling performance (12000 cycles at 10 mA cm –2 ). Notably, such cathode can also exhibit an impressive capacity retention of 97% after 8600 cycles, even at an ultrahigh loading mass of 16.05 mg cm –2 . As such, our strategy can be extended to design other metal I 2 batteries with high loading and long-life expectancy.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
Bifunctional self‐segregated electrolyte realizing high‐performance zinc‐iodine batteries

Xueting Hu,Zequan Zhao,Yongqiang Yang,Hao Zhang,Guojun Lai,Bingan Lu,Peng Zhou,Lina Chen,Jiang Zhou

DOI: https://doi.org/10.1002/inf2.12620

2024-08-30

InfoMat

Abstract:The development of Zn‐I2 batteries has been restricted to the shuttle effect of polyiodides and the instability of the anode/electrolyte interface. Hence, a bifunctional self‐segregated electrolyte which synergistically addressed the issues was proposed. Batteries with the specific electrolyte exhibited superior electrochemical performance, illustrating the application prospect in energy storage. Static rechargeable zinc‐iodine (Zn‐I2) batteries are superior in safety, cost‐effectiveness, and sustainability, giving them great potential for large‐scale energy storage applications. However, the shuttle effect of polyiodides on the cathode and the unstable anode/electrolyte interface hinder the development of Zn‐I2 batteries. Herein, a self‐segregated biphasic electrolyte (SSBE) was proposed to synergistically address those issues. The strong interaction between polyiodides and the organic phase was demonstrated to limit the shuttle effect of polyiodides. Meanwhile, the hybridization of polar organic solvent in the inorganic phase modulated the bonding structure, as well as the effective weakening of water activity, optimizing the interface during zinc electroplating. As a result, the Zn‐I2 coin cells performed a capacity retention of nearly 100% after 4000 cycles at 2 mA cm−2. And a discharge capacity of 0.6 Ah with no degradation after 180 cycles was achieved in the pouch cell. A photovoltaic energy storage battery was further achieved and displayed a cumulative capacity of 5.85 Ah. The successfully designed energy storage device exhibits the application potential of Zn‐I2 batteries for stationary energy storage.

materials science, multidisciplinary
Hetero-Polyionic Hydrogels Enable Dendrites-Free Aqueous Zn-I2 Batteries with Fast Kinetics

Jin-Lin Yang,Zehua Yu,Jiawen Wu,Jia Li,Liangyuan Chen,Tuo Xiao,Tao Xiao,Da-Qian Cai,Kang Liu,Peihua Yang,Hong Jin Fan

DOI: https://doi.org/10.1002/adma.202306531

Abstract:Rechargeable aqueous Zn-I2 batteries (ZIB) are regarded as a promising energy storage candidate. However, soluble polyiodide shuttling and rampant Zn dendrite growth hamper its commercial implementation. Herein, a hetero-polyionic hydrogel is designed as the electrolyte for ZIBs. On the cathode side, iodophilic polycationic hydrogel (PCH) effectively alleviates the shuttle effect and facilitates the redox kinetics of iodine species. Meanwhile, polyanionic hydrogel (PAH) toward Zn metal anode uniformizes Zn2+ flux and prevents surface corrosion by electrostatic repulsion of polyiodides. Consequently, the Zn symmetric cells with PAH electrolyte demonstrate remarkable cycling stability over 3000 h at 1 mA cm-2 (1 mAh cm-2 ) and 800 h at 10 mA cm-2 (5 mAh cm-2 ). Moreover, the Zn-I2 full cells with PAH-PCH hetero-polyionic hydrogel electrolyte deliver a low-capacity decay of 0.008 ‰ per cycle during 18 000 cycles at 8 C. This work sheds light on hydrogel electrolytes design for long-life conversion-type aqueous batteries.
A highly conductive gel electrolyte with favourable ion transfer channels for longevous zinc-iodine batteries

Song Chen,Siyu Ding,Qianwu Chen,Jintao Zhang,yadong tian

DOI: https://doi.org/10.1039/d2sc06035c

IF: 8.4

2022-11-30

Chemical Science

Abstract:Aqueous rechargeable zinc-iodine batteries (ARZIBs), as a powerful energy alternative, have inherent advantages such as low cost, good safety, and environmental friendliness. Unfortunately, uneven Zn deposition with the dendrite growth and undesirable side reactions seriously compromise the safety and stability of ARZIBs. Herein, a novel strategy is demonstrated to fabricate highly conductive Iota-carrageenan gel electrolyte. The unique double helix structure with good mechanical properties provides favorable Zn 2+ channels guided by sulfate groups, which endow to confine and orderly guide the Zn deposition. Additionally, the activity of water molecules confined in the gel electrolyte is reduced at the solid-solid interface, thus inhibiting the corrosion reactions of zinc electrode. As a result, such gel electrolyte with a remarkable ionic conductivity (42.95 mS cm -1 ) showed a good cycling stability over 1000 h. Importantly, the Zn-I 2 batteries with the IC-Zn gel electrolyte demonstrated a remarkable reversibility with an impressive capacity retention (91.9%) during 5000 cycles and high average CE (99.86%). This work provides a reliable strategy to develop natural polymer gel electrolytes and regulate the Zn deposition for advanced rechargeable Zn-I 2 batteries.

chemistry, multidisciplinary
Liquorice as a feed additive – a health promoting natural sweetener

T. Kaschubek,E. Mayer,G. Schatzmayr,K. Teichmann

DOI: https://doi.org/10.1055/S-0036-1596987

IF: 3.007

2016-12-01

Planta Medica

Abstract:
Toward Shuttle‐Free Zn–I2 Battery: Anchoring and Catalyzing Iodine Conversion by High‐Density P‐Doping Sites in Carbon Host

Peng‐Fang Zhang,Jia‐Hui Li,Shao‐Jian Zhang,Da‐Cheng Li,Su‐Yuan Zeng,Shu‐Ling Xu,Qing‐Xia Yao,Ling‐Yang Liu,Lei Ding,Heng‐Xiang Li,Yi‐Yang Hu,Jun‐Tao Li,Yao Zhou

DOI: https://doi.org/10.1002/adfm.202306359

IF: 19

2023-10-08

Advanced Functional Materials

Abstract:The high‐density P dopants and high specific areas of the carbonaceous framework can anchor iodine (I2) and polyiodide anions (Ix−, x = 1, 3, or 5) and promote inter‐conversion of I2/Ix−, which is important in suppressing the shuttle effect of Zn–I2 batteries. It enables the battery to stand for 10 000 cycles at 2 A g−1 with ignorable capacity decay. Zn–iodine (I2) battery, as a promising energy storage device, especially under high I2 loading, is harassed by the shuttle effect of the soluble polyiodide intermediates. Herein, the bifunctional role of 2D carbon nanosponge with rich P‐dopant (4.2 at%) and large specific surface area (1966 m2 g−1) in anchoring I2/Ix− (x = 1, 3 or 5) and catalyzing their mutual conversion is reported. Both experiment and computational results reveal the transfer of electrons from the P‐doped site to iodine species, showing strong interfacial interaction. When being used as a host, it possesses high specific capture capacity for I2 (3.34 giodine g−1 or 1.6 mgiodine m−2) and Ix− (6.12 gtriiodide g−1 or 3.1 mgtriiodide m−2), which thus effectively suppresses the shuttle effect, supported by in situ UV–vis and Raman spectra. In addition to the strong interfacial interaction that favors iodine conversion, the P‐doped sites can also catalyze the conversion of I5− to I2, which is the rate‐determining step. Consequently, Zn–I2 batteries under a high I2 content (70 wt%) deliver high specific capacity (220.3 mAh g−1), superior Coulombic efficiency (>99%), and low self‐discharge rate; moreover, they can also operate steadily at 2 A g−1 with ignorable capacity decay for 10 000 cycles.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Cation-Conduction Dominated Hydrogels for Durable Zinc-Iodine Batteries

Jin-Lin Yang,Tuo Xiao,Tao Xiao,Jia Li,Zehua Yu,Kang Liu,Peihua Yang,Hong Jin Fan

DOI: https://doi.org/10.1002/adma.202313610

Abstract:Zinc-iodine batteries have the potential to offer high energy-density aqueous energy storage, but their lifetime is limited by the rampant dendrite growth and the concurrent parasite side reactions on the Zn anode, as well as the shuttling of polyiodides. Herein, a cation-conduction dominated hydrogel electrolyte is designed to holistically enhance the stability of both zinc anode and iodine cathode. In this hydrogel electrolyte, anions are covalently anchored on hydrogel chains, and the major mobile ions in the electrolyte are restricted to be Zn2+. Specifically, such a cation-conductive electrolyte results in a high zinc ion transference number (0.81) within the hydrogel and guides epitaxial Zn nucleation. Furthermore, the optimized Zn2+ solvation structure and the reconstructed hydrogen bond networks on hydrogel chains contribute to the reduced desolvation barrier and suppressed corrosion side reactions. On the iodine cathode side, the electrostatic repulsion between negative sulfonate groups and polyiodides hinders the loss of the iodine active material. This all-round electrolyte design renders zinc-iodine batteries with high reversibility, low self-discharge, and long lifespan.
Toward Forty Thousand‐Cycle Aqueous Zinc‐Iodine Battery: Simultaneously Inhibiting Polyiodides Shuttle and Stabilizing Zinc Anode through a Suspension Electrolyte

Guanhong Chen,Yuanhong Kang,Huiya Yang,Minghao Zhang,Jin Yang,Zeheng Lv,Qilong Wu,Pengxiang Lin,Yang Yang,Jinbao Zhao

DOI: https://doi.org/10.1002/adfm.202300656

IF: 19

2023-04-24

Advanced Functional Materials

Abstract:Vermiculite nanosheets (VS) electrolyte is designed to restrain the shuttle effect of polyiodides and stabilize Zn anode for high‐performance zine‐iodine batteries. Polyiodides can be effectively anchored on the VS surface owing to exposed silica‐oxygen bonds, which are proved by in situ Ultraviolet‐visible spectra. VS interfacial protective layer can prevent reaction between leaked polyiodides and Zn anode, while serving as Zn2+ accelerator for dendrite‐free deposition. Aqueous zinc‐iodine (Zn‐I2) batteries are promising candidates for grid‐scale energy storage due to their safety and cost‐effectiveness. However, the shuttle effect of polyiodides, Zn corrosion, and accumulation of by‐products restrict their applications. Herein, a simple vermiculite nanosheets (VS) suspension electrolyte is designed for simultaneous confinement of polyiodides and stabilization of Zn anode. It is found that the generation of I5− as dominant intermediate and the precipitation reaction between I5− and alkaline by‐products should cause irreversible iodine species loss. Benefiting from the high binding energy between polyiodides and silica‐oxygen bonds of VS, dissolved polyiodides are effectively anchored on the surface of VS suspended in the bulk electrolyte to suppress the shuttle effect, which is confirmed by in situ Raman, Ultraviolet‐visible characterizations and theoretical calculations. Furthermore, the self‐assembly VS interfacial layer on the surface of Zn anode hinders side reactions induced by polyiodides. Meanwhile, the interlayer and surface excess negative charges of VS tend to be compensated by Zn2+ from diffuse layer, which serves as ion accelerators for transferring Zn2+ at the interface immediately, rendering dendrite‐free Zn plating/stripping behavior. Consequently, the Zn‐I2 battery with VS electrolyte achieves an ultra‐long lifespan of 40000 cycles with a negligible capacity decay at 20 C.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
An Ionically Crosslinked Composite Hydrogel Electrolyte Based on Natural Biomacromolecules for Sustainable Zinc-Ion Batteries

Haoyang Ge,Liping Qin,Bingyao Zhang,Long Jiang,Yan Tang,Bingan Lu,Siyu Tian,Jiang Zhou

DOI: https://doi.org/10.1039/d4nh00243a

2024-06-23

Nanoscale Horizons

Abstract:Zinc-ion batteries (ZIBs) are regarded as promising power sources for flexible and biocompatible devices due to their good sustainability and high intrinsic safety. However, their applications have been hindered by the issues of uncontrolled zinc dendrite growth and water-induced side reactions in conventional liquid electrolytes. Herein, an ionically crosslinked composite hydrogel electrolyte based on natural biomacromolecules, including iota-carrageenan and sodium alginate, is designed to promote highly efficient and reversible Zn plating/stripping. The abundant functional groups of the macromolecules effectively suppress the reactivity of water molecules and facilitate uniform Zn deposition. Moreover, the composite hydrogel electrolyte exhibits a high ionic conductivity of 5.89×10-2 S cm-1 and a Zn2+ transference number of 0.58. Consequently, the Zn||Zn symmetric cell with the composite hydrogel electrolyte shows a stable cycle life of more than 500 h. Meanwhile, the Zn||NH4V4O10 coin cell with the composite hydrogel electrolyte retains a high specific capacity of approximately 200 mA h g-1 after 600 cycles at 2 A g-1. The Zn||NVO pouch cell based on the hydrogel electrolyte also showed a high specific capacity of 246.1 mAh g-1 at 0.5 A g-1 and retained 70.7% of its initial capacity after 150 cycles. The pouch cell worked well at different bending angles and exhibited a capacity retention rate of 98% after returning to the initial state from 180°-folding. This work aims to construct high-performance hydrogel electrolytes by using low-cost natural materials, which may provide a solution for the application of ZIBs in flexible biocompatible devices.

materials science, multidisciplinary,nanoscience & nanotechnology,chemistry, physical
Restraining the shuttle effect of polyiodide and modulating the deposition of zinc ions to enhance the cycle lifespan of aqueous Zn-I 2 battery

Qu Yue,Yu Wan,Xiaoqin Li,Qian Zhao,Taotao Gao,Guowei Deng,Bing Li,Dan Xiao

DOI: https://doi.org/10.1039/d4sc00792a

IF: 8.4

2024-03-19

Chemical Science

Abstract:The boom of aqueous Zn-based energy storage devices, such as zinc-iodine (Zn-I 2 ) batteries, is quite suitable for safe and sustainable energy storage technologies. However, in rechargeable aqueous Zn-I 2 batteries, the shuttle phenomenon of polyiodide ions usually leads to irreversible capacity loss resulting from both the iodine cathode and the zinc anode, and thus impinges on the cycle lifespan of the battery. Herein, a nontoxic, biocompatible, and economical polymer of polyvinyl alcohol (PVA) is exploited as an electrolyte additive. Based on comprehensive analysis and computational results, it is evident that the PVA additive, owing to its specific interaction with polyiodide ions and lower binding energy, can effectively suppress the migration of polyiodide ions towards the zinc anode surface, thereby mitigating the adverse reactions between polyiodide ions and zinc. Simultaneously, the hydrogen bond network of water molecules is disrupted due to the abundant hydroxyl groups within the PVA additive, leading to a decrease in water activity and mitigating the zinc corrosion. Further, because of the preferential adsorption of PVA on the zinc anode surface, the deposition environment for zinc ions is adjusted and its nucleation overpotential increases, which is favorable for the dense and uniform deposition of zinc ions, thus ensuring the improvement of the performance of the Zn-I 2 battery. This investigation has inspired the development of a user-friendly and high-performance Zn-I 2 battery.

chemistry, multidisciplinary
A Versatile Redox-Active Electrolyte for Solid Fixation of Polyiodide and Dendrite-Free Operation in Sustainable Aqueous Zinc-Iodine Batteries

Seungho Back,Liangliang Xu,Joonhee Moon,Jinuk Kim,Yanan Liu,Seung Yeop Yi,Daeeun Choi,Jinwoo Lee

DOI: https://doi.org/10.1002/smll.202405487

IF: 13.3

2024-08-02

Small

Abstract:Practical utilization of zinc-iodine (Zn-I2) batteries is hindered by significant challenges, primarily stemming from the polyiodide shuttle effect on the cathode and dendrite growth on the anode. Herein, a feasible redox-active electrolyte has been introduced with tetraethylammonium iodide as an additive that simultaneously addresses the above mentioned challenges via polyiodide solidification on the cathode and the electrostatic shielding effect on the anode. The tetraethylammonium (TEA+) captures water-soluble polyiodide intermediates (I3 -, I5 -), forming a solid complex at the cathode, thereby suppressing capacity loss during charge/discharge. Furthermore, the TEA+ mitigates dendrite growth on the Zn anode via the electrostatic shielding effect, promoting uniform and compact Zn deposition at the anode. Consequently, the Zn||Zn symmetric cell demonstrates superior cycling stability during Zn plating/stripping over 4,200 h at 1 mA cm-2 and 1 mAh cm-2. The Zn||NiNC full-cell exhibits a stable capacity retention of 98.4% after 20 000 cycles (>5 months) with near-unity Coulombic efficiency at 1 A g-1. The study provides novel insights for establishing a new direction for low-cost, sustainable, and long-lifespan Zn-I2 batteries.
Polyiodide Confinement by Starch Enables Shuttle‐Free Zn‐Iodine Batteries

Shao‐Jian Zhang,Junnan Hao,Huan Li,Peng‐Fang Zhang,Zu‐Wei Yin,Yu‐Yang Li,Bingkai Zhang,Zhan Lin,Shi‐Zhang Qiao

DOI: https://doi.org/10.1002/adma.202201716

IF: 29.4

2022-04-18

Advanced Materials

Abstract:Aqueous Zn-iodine (Zn-I2 ) batteries have been regarded as a promising energy-storage system owing to their high energy/power density, safety, and cost-effectiveness. However, the polyiodide shuttling results in serious active mass loss and Zn corrosion, which limits the cycling life of Zn-I2 batteries. Inspired by the chromogenic reaction between starch and iodine, a structure confinement strategy is proposed to suppress polyiodide shuttling in Zn-I2 batteries by hiring starch, due to its unique double-helix structure. In situ Raman spectroscopy demonstrates an I5 - -dominated I- /I2 conversion mechanism when using starch. The I5 - presents a much stronger bonding with starch than I3 - , inhibiting the polyiodide shuttling in Zn-I2 batteries, which is confirmed by in situ ultraviolet-visible spectra. Consequently, a highly reversible Zn-I2 battery with high Coulombic efficiency (≈100% at 0.2 A g-1 ) and ultralong cycling stability (>50 000 cycles) is realized. Simultaneously, the Zn corrosion triggered by polyiodide is effectively inhibited owing to the desirable shuttling-suppression by the starch, as evidenced by X-ray photoelectron spectroscopy analysis. This work provides a new understanding of the failure mechanism of Zn-I2 batteries and proposes a cheap but effective strategy to realize high-cyclability Zn-I2 batteries.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
All‐Round Ionic Liquids for Shuttle‐Free Zinc‐Iodine Battery

TAO XIAO,JINLIN YANG,BAO ZHANG,JIAWEN WU,JINLIANG LI,WENJIE MAI,Hong Jin Fan

DOI: https://doi.org/10.1002/anie.202318470

2024-01-07

Angewandte Chemie International Edition

Abstract:The practical implementation of aqueous zinc-iodine batteries (ZIBs) is hindered by the rampant Zn dendrites growth, parasite corrosion, and polyiodide shuttling. In this work, ionic liquid EMIM[OAc] is employed as an all-round solution to mitigate challenges on both the Zn anode and the iodine cathode side. First, the EMIM+ embedded lean-water inner Helmholtz plane (IHP) and inert solvation sheath modulated by OAc- effectively repels H2O molecules away from the Zn anode surface. The preferential adsorption of EMIM+ on Zn metal facilitates uniform Zn nucleation via a steric hindrance effect. Second, EMIM+ can reduce the polyiodide shuttling by hindering the iodine dissolution and forming an EMIM+–I3– dominated phase. These effects holistically enhance the cycle life, which is manifested by both Zn||Zn symmetric cells and Zn-I2 full cells. ZIBs with EAc deliver a capacity decay rate of merely 0.01 ‰ per cycle after over 18,000 cycles at 4 A g-1, and lower self-discharge and better calendar life than the ZIBs without ionic liquid EAc additive.

chemistry, multidisciplinary
Long-Life Aqueous Zn-I2 Battery Enabled by a Low-Cost Multifunctional Zeolite Membrane Separator.

Zhengang Li,Xiaohong Wu,Haoshen Zhou,Shigang Sun,Shiyuan Zhou,Xiaoyu Yu,Yu Qiao

DOI: https://doi.org/10.1021/acs.nanolett.2c00460

2022-03-10

Abstract:Aqueous zinc iodide (Zn-I2) batteries are promising large-scale energy-storage devices. However, the uncontrollable diffuse away/shuttle of soluble I3- leads to energy loss (low Coulombic efficiency, CE), and poor reversibility (self-discharge). Herein, we employ an ordered framework window within a zeolite molecular sieve to restrain I3- crossover and prepare zeolite molecular sieve particles into compact, large-scale, and flexible membranes at the engineering level. The as-prepared membrane can confine I3- within the catholyte region and restrain its irreversible escape, which is proved via space-resolution and electrochemical in situ time-resolution Raman technologies. As a result, overcharge/self-discharge and Zn corrosion are effectively controlled by zeolite separator. After replacing the typically used glass fiber separator to a zeolite membrane, the CE of Zn-I2 battery improves from 78.9 to 98.6% at 0.2 A/g. Besides, after aging at the fully charged state for 5.0 h, self-discharge is restrained and CE is enhanced from 44.0 to 85.65%. Moreover, the Zn-I2 cell maintains 91.0% capacity over 30,000 cycles at 4.0 A/g.

Engineering,Chemistry,Medicine,Materials Science
Synergetic Modulation of Ion Flux and Water Activity in a Single Zn 2+ Conductor Hydrogel Electrolyte for Ultrastable Aqueous Zinc-Ion Batteries

Fan Yang,Haiming Hua,Pengbin Lai,Pengxiang Lin,Jin Yang,Minghao Zhang,Yang Yang,Jinbao Zhao

DOI: https://doi.org/10.1021/acsaem.2c01520

IF: 6.4

2022-08-25

ACS Applied Energy Materials

Abstract:Aqueous zinc-ion batteries (ZIBs) suffer from dendrite growth, hydrogen evolution reaction (HER), and cathode dissolution. To overcome the above issues, we designed a single Zn2+ conductor hydrogel electrolyte (poly 3-sulfopropyl acrylate zinc, PSPAZn) through UV photopolymerization of the designed monomer zinc salt of SPAZn. The polymerized and fixed anion chains with single Zn2+-conducting characteristics not only promote the uniform distribution of Zn2+ ion flux by charge interaction but also decrease the concentration polarization, leading to nondendrite Zn deposition behavior. Meanwhile, the water activity is significantly reduced due to abundant hydrophilic groups in polymer side chains, effectively inhibiting HER and the dissolution of cathode materials. Consequently, the lifespan of a zinc anode with PSPAZn electrolyte is extended to more than 3000 h, and the Zn/MnO2 full ZIBs also exhibit a high capacity retention of 77.1% after 220 cycles without MnSO4 additive. Such a simple kilogram-scale preparation strategy should offer opportunities for developing practical ZIBs.

materials science, multidisciplinary,chemistry, physical,energy & fuels
In Situ Synthesis of Cathode Materials for Aqueous High-Rate and Durable Zn–I2 Batteries

Qiang Guo,Haozhen Wang,Xiaotong Sun,Ya'nan Yang,Nan Chen,Liangti Qu

DOI: https://doi.org/10.1021/acsmaterialslett.2c00608

IF: 11.4

2022-01-01

ACS Materials Letters

Abstract:Rechargeable aqueous zinc-iodine batteries are considered as one of strong contenders for next-generation energy storage systems by virtue of their low cost and high safety. However, the shuttle effect of highly soluble I-3(-) in zinc-iodine batteries leads to a rapid decrease in capacity and Coulomb efficiency during cycling, which seriously hinders their further development and application. Here, we developed an in situ synthesis of an aqueous fast-charging and ultrastable Zn-I-2 battery cathode materials composed of mesoporous carbon and I-2. Compounding I-2 with highly conductive carbon is an effective method to facilitate electron and ion transport and confine polyiodides/I- conversion reaction inside pores, thereby eliminating polyiodides shuttle effect, which greatly improves cycling stability of Zn-I-2 batteries. The developed Zn- I2 battery provides a specific capacity of 90 mAh g(-1) at 5 A g(-1), excellent multiplicative performance, and retains a capacity retention of 80.6% over an ultralong period of 39 000 cycles at 10 A g(-1), superior to previously reported Zn-I-2 batteries. Furthermore, Zn-I-2 pouch cell retained 89% capacity retention over 1000 cycles at 0.5 A g(-1). This work undoubtedly sets a precedent for ultralong cycle life Zn-I-2 battery cathode materials and provides an important solution and pathway for the assembly of I-2 -based materials suitable for high-performance aqueous energy technologies.
Flexible PEDOT:PSS nanopapers as “anion-cation regulation” synergistic interlayers enabling ultra-stable aqueous zinc-iodine batteries

Ying Zhang,Tianyu Zhao,Shanchen Yang,Yaxin Zhang,Yue Ma,Zhaohui Wang

DOI: https://doi.org/10.1016/j.jechem.2022.08.026

IF: 13.1

2022-12-01

Journal of Energy Chemistry

Abstract:Aqueous zinc-iodine (Zn-I2) batteries are promising candidates for low-cost grid-scale energy storage systems. However, the long-term stability and energy density of the Zn-I2 batteries are largely hindered by the lack of feasible and scalable methods that coherently suppress polyiodide shuttling and Zn dendrites growth, especially at high current densities. Herein, a flexible, thin and lightweight poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) nanopaper is designed as an “anion-cation regulation” synergistic interlayer to tackle the above issues. The PEDOT:PSS interlayer exhibits a 3D nanofibrous network with uniformly distributed mesopores, abundant polar groups and intrinsic conductivity, which renders an even Zn2+ flux at Zn anode and facilitates homogeneous current distributions at I2 cathode. Meanwhile, such interlayer can act as physiochemical shield to enhance the utilization of I2 cathode via the coulombic repulsion and chemical adsorption effect against polyiodide shuttling. Thus, long-term dendrite-free Zn plating/stripping is achieved at simultaneous high current density and high areal capacity (550 h at 10 mA cm−2/5 mAh cm−2). Zn-I2 batteries harvest a high capacity (230 mAh g−1 at 0.1 A g−1) and an ultralong lifespan (>20000 cycles) even at 10 A g−1. This work demonstrates the potential use of the multifunctional interlayers for Zn-I2 battery configuration innovation by synergistic regulation of cations and anions at the electrodes/electrolyte interface.

chemistry, physical,engineering, chemical, applied,energy & fuels

A single-machine scheduling with a truncated linear deterioration and ready times

<i>In</i>-<i>situ</i> constructing polyacrylamide interphase enables dendrite-free zinc anode in aqueous batteries

Anchoring Polyiodide to Conductive Polymers As Cathode for HighPerformance Aqueous Zinc-Iodine Batteries

Armoring the Cathode with Starch Gel Enables Shuttle-Free Zinc-Iodine Batteries

Chemisorption Effect Enables High-Loading Zinc-Iodine Batteries

Bifunctional self‐segregated electrolyte realizing high‐performance zinc‐iodine batteries

Hetero-Polyionic Hydrogels Enable Dendrites-Free Aqueous Zn-I2 Batteries with Fast Kinetics

A highly conductive gel electrolyte with favourable ion transfer channels for longevous zinc-iodine batteries

Liquorice as a feed additive – a health promoting natural sweetener

Toward Shuttle‐Free Zn–I2 Battery: Anchoring and Catalyzing Iodine Conversion by High‐Density P‐Doping Sites in Carbon Host

Cation-Conduction Dominated Hydrogels for Durable Zinc-Iodine Batteries

Toward Forty Thousand‐Cycle Aqueous Zinc‐Iodine Battery: Simultaneously Inhibiting Polyiodides Shuttle and Stabilizing Zinc Anode through a Suspension Electrolyte

An Ionically Crosslinked Composite Hydrogel Electrolyte Based on Natural Biomacromolecules for Sustainable Zinc-Ion Batteries

Restraining the shuttle effect of polyiodide and modulating the deposition of zinc ions to enhance the cycle lifespan of aqueous Zn-I 2 battery

A Versatile Redox-Active Electrolyte for Solid Fixation of Polyiodide and Dendrite-Free Operation in Sustainable Aqueous Zinc-Iodine Batteries

Polyiodide Confinement by Starch Enables Shuttle‐Free Zn‐Iodine Batteries

All‐Round Ionic Liquids for Shuttle‐Free Zinc‐Iodine Battery

Long-Life Aqueous Zn-I2 Battery Enabled by a Low-Cost Multifunctional Zeolite Membrane Separator.

Synergetic Modulation of Ion Flux and Water Activity in a Single Zn 2+ Conductor Hydrogel Electrolyte for Ultrastable Aqueous Zinc-Ion Batteries

In Situ Synthesis of Cathode Materials for Aqueous High-Rate and Durable Zn–I2 Batteries

Flexible PEDOT:PSS nanopapers as “anion-cation regulation” synergistic interlayers enabling ultra-stable aqueous zinc-iodine batteries