Abstract:Microcrystalline cellulose dried at different temperature and its reinforced polylactic composites. Microcrystalline cellulose (MCC) fibers are co mmonly used to reinforce polymers; however, their freeze‐drying process consumes a lot of energy. In this study, MCC dried at different temperatures, oven‐dried at 25, 50, 75, and 103°C and freeze‐dried, was evaluated based on their effect on the reinforced composites. The dried MCC was compounded with polylactic acid (PLA) by melt extrusion and compressed into an MCC/PLA composite film. The morphology, structure, and crystallinity of the dried MCCs and MCC/PLA composites were analyzed using scanning electron microscopy, laser particle size analysis, x‐ray diffraction, mechanical testing, and Fourier transform infrared spectroscopy. It was proved that MCC dried at 103°C was more uniformly dispersed and tightly bound to the PLA matrix than freeze‐dried MCC. Tensile measurements showed that the MCC dried at 103°C had nearly the same tensile strength (58.35 MPa) as that of the freeze‐dried MCC (58.7 MPa) and was higher than that of the other oven‐dried MCC. Energy consumption evaluation revealed that oven‐drying consumed much less energy than freeze‐drying MCC for 24 h to obtain the same final moisture content. MCC dried at 103°C has significantly better properties than MCC dried at 25, 50, and 75°C, similar to freeze‐drying. Concerning performance and energy consumption, drying at 103°C is determined the optimal choice to support the preparation of MCC‐reinforced PLA composites. Highlights Drying temperature effects aggregation of MCC. MCC Dried at 103°C can present similar properties to freeze‐dried MCC but save more energy. Oven‐drying can be a good way to dry MCC for the preparation of MCC/PLA composite.

The key role of unique crystalline property in the hydrolytic degradation process of microcrystalline cellulose-reinforced stereo-complexed poly(lactic acid) composites

Research progress on stereocomplex crystallization of poly(lactic acid) enantiomeric blends

Mechanical Properties and Degradation Properties in Vitro of Carbon Fiber Reinforced Hydroxyapatite/polylactide Composite

Manipulation of Non-Isothermal Crystallization Kinetics of Poly(lactic Acid) Composite Film by a Novel Nucleating Agent

Crystallisation, Mechanical Properties and Rheological Behaviour of PLA Composites Reinforced by Surface Modified Microcrystalline Cellulose

Isothermal crystallization process and thermal analysis of polylactic acid/cotton fiber composites during thermal degradation

Scalable Preparation of Complete Stereo-Complexation Polylactic Acid Fiber and Its Hydrolysis Resistance

The Mechanical Properties and Degradation Behavior of 3D-Printed Cellulose Nanofiber/Polylactic Acid Composites

Hydrolytic And Thermal Degradation Of Polyethylene Glycol Compatibilized Poly(Lactic Acid)-Nanocrystalline Cellulose Bionanocomposites

Degradation of Mechanical Properties of Flax/PLA Composites in Hygrothermal Aging Conditions

Effects of Crystallinity and Branched Chain on Thermal Degradation of Polyethylene: A SCC-DFTB Molecular Dynamics Study

Effect of Stereocomplexation on High-temperature Microcellular Foaming Behaviour, Compressive Property and Heat Resistance of Branched Poly(l-lactide)/poly(d-lactide)

Multiscale Structural Evolutions and Deformation Mechanisms of Stereocomplexed and Homocrystalline Poly(lactic acid)s during Stretching: Correlating Thermomechanical Properties with Polymorphic Structures

Preparing microcrystalline cellulose‐reinforced polylactic acid composites by an energy saving method

Differentiation between Hydrolytic and Thermo-Oxidative Degradation of Poly(lactic acid) and Poly(lactic acid)/Starch Composites in Warm and Humid Environments

Promoting the formation of stereocomplex crystal in PLLA/PDLA by crosslinking restricted phase separation and solid-state stretching induced orientation

The Effect of Stereocomplexation and Crystallinity on the Degradation of Polylactide Nanoparticles

Multiscale analysis on multiextruded poly(lactic acid)/organoclay nanocomposites: Insights into the underlying mechanisms of thermomechanical degradation

Evolution of thermal behavior, mechanical properties, and microstructure in stereocomplexable poly(lactic acid) during physical ageing

Environmental Degradation of Starch/Poly(Lactic Acid) Composite in Seawater

The aging behavior of degradable plastic polylactic acid under the interaction of environmental factors