Abstract:Solution-processed organic photodetectors (OPDs) with organic layers on the order of nanometers have received tremendous attention due to their advantages of low cost, light weight, flexibility, and simple fabrication. The relatively high dark current, which is ascribed to the inherent properties of the bulk heterojunction structure, limits further promotion of OPDs. In this work, we performed a systematic investigation on transfer printing technology (TPT) based on different electron blocking layers (EBLs) and active layers. We demonstrated that the surface morphology of transfer-printed layers determines the performance of OPDs. Compared with PBDB-T and MEH-PPV, a smooth and compact P3HT layer can be obtained by TPT. The results demonstrated that in addition to the energy level or absorption spectrum of the material, the mechanical property that the surface remains smooth after transfer printing needs to be added as a selection criterion for transfer-printed EBLs. The dark current was reduced by approximately 2 orders of magnitude compared with that of the OPD without an EBL based on three different active layers (including fullerene and nonfullerene systems), while comparable photocurrents were obtained. Consequently, a similar responsivity (R), an improved specific detectivity (D*), and an enlarged linear dynamic range for OPDs were observed with the insertion of transfer-printed P3HT. Finally, the effect of transfer printing on the photoresponse time was investigated, and the results demonstrated that transfer-printed EBLs slightly increased the photoresponse time of OPDs.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsanm.1c02165.Molecular structures of used materials; UV–vis absorption spectra of EBLs; SEM and AFM images of transfer-printed EBLs before and after transfer printing; dark current density of OPDs with varied thickness of EBLs; EQE spectra; LDR of OPDs with or without transfer-printed EBL under 0 V bias; and cyclic photoresponse of OPDs with or without transfer-printed EBL under −5 V bias (PDF)This article has not yet been cited by other publications.

Molecular Engineering of Benzobisoxazole‐Based Conjugated Polymers for High‐Performance Organic Photodetectors and Fingerprint Image Sensors

Printable and Flexible Phototransistors Based on Blend of Organic Semiconductor and Biopolymer

Enhanced molecular planarity for high-performance photodetectors: Effect of backbone conformation via alkyl substitution position control in dithienoquinoxaline-based conjugated polymers

Performance-enhanced intrinsic polarization-sensitive organic photodetectors by molecular interaction modulation

Highly stable photomultiplication type organic photodetectors with single-polymer containing intramolecular traps as active layer

Development of Benzobisoxazole-Based Novel Conjugated Polymers for Organic Thin-Film Transistors

Highly Sensitive Broad Light Response Organic Photodetectors from Pyrrolo[3,4- c ]pyrrole-1,4-dione-Based Conjugated Polymer with Noncovalent Conformational Locks

Transfer-Printed Nanoscale Poly(3-hexylthiophene-2,5-diyl) Layers for Organic Photodetectors

A High‐Resolution Thin‐Film Fingerprint Sensor Using a Printed Organic Photodetector

Significant enhancement of responsivity of organic photodetectors upon molecular engineering

Flexible Short-Wave Infrared Image Sensors Enabled by High-Performance Polymeric Photodetectors

Conjugated Polymer Heteroatom Engineering Enables High Detectivity Symmetric Ambipolar Phototransistors

Organic Bulk–Heterojunction Blends with Vertical Phase Separation for Enhanced Organic Photodetector Performance

Photo-crosslinking and layer-by-layer processed organic photodetectors with remarkably suppressed dark current

Efficient All‐Polymer Photomultiplication‐Type Organic Photodetectors with Prolonged Crystallization Process

Large‐Area, Semitransparent, and Flexible All‐Polymer Photodetectors

Highly Efficient Ternary Near-Infrared Organic Photodetectors for Biometric Monitoring

Recent Advances in Organic Photodetectors

High-responsivity, High-detectivity Photomultiplication Organic Photodetector Realized by a Metal-Insulator-Semiconductor Tunneling Junction

Covalent Patterning and Rapid Visualization of Latent Fingerprints with Photo-Cross-Linkable Semiconductor Polymer Dots.

Design, Synthesis and Their Application in Photodetectors of Conjugated Polymers Based on Anthraquinone Imide