Rebuttal to Correspondence on "Effects of Temperature and DC Electric Fields on Perfluorooctanoic Acid Sorption Kinetics to Activated Carbon"

Yongping Shan,Wentao Jiao

DOI: https://doi.org/10.1021/acs.est.4c09737

IF: 11.4

2024-10-25

Environmental Science & Technology

Abstract:Environ Sci Technol . 2024 Oct 23. doi: 10.1021/acs.est.4c09737. Online ahead of print. NO

environmental sciences,engineering, environmental

What problem does this paper attempt to address?

Correspondence on "Effects of Temperature and DC Electric Fields on Perfluorooctanoic Acid Sorption Kinetics to Activated Carbon"

Frank-Dieter Kopinke

DOI: https://doi.org/10.1021/acs.est.4c07601

IF: 11.4

2024-10-16

Environmental Science & Technology

Abstract:Environ Sci Technol . 2024 Oct 14. doi: 10.1021/acs.est.4c07601. Online ahead of print. NO

environmental sciences,engineering, environmental
Effects of Temperature and DC Electric Fields on Perfluorooctanoic Acid Sorption Kinetics to Activated Carbon

Yongping Shan,Huijuan Hao,Yuzhou Yin,Naiwen Hu,Mingxiu Zhan,Dong Ma,Yongguang Yin,Wentao Jiao,Lukas Y Wick

DOI: https://doi.org/10.1021/acs.est.3c10590

IF: 11.4

2024-03-21

Environmental Science & Technology

Abstract:Sorption to activated carbon is a common approach to reducing environmental risks of waterborne perfluorooctanoic acid (PFOA), while effective and flexible approaches to PFOA sorption are needed. Variations in temperature or the use of electrokinetic phenomena (electroosmosis and electromigration) in the presence of external DC electric fields have been shown to alter the contaminant sorption of contaminants. Their role in PFOA sorption, however, remains unclear. Here, we investigated the joint...

environmental sciences,engineering, environmental
The Effects of Soil Properties and Co-Contaminants on Sorption of Perfluorooctane Sulfonate (PFOS) in Contrasting Soils

Yanju Liu,Fangjie Qi,Cheng Fang,Ravi Naidu,Luchun Duan,Raja Dharmarajan,Prasath Annamalai

DOI: https://doi.org/10.1016/j.eti.2020.100965

IF: 7.758

2020-01-01

Environmental Technology & Innovation

Abstract:Sorption plays an important role in controlling the fate and behaviour of per- and polyfluoroalkyl substances (PFAS) in soils. However, there is no consensus on the influence of key soil properties on sorption of perfluorooctane sulfonate (PFOS) in the current literature. In particular, the effects of soil mineral components on sorption have not been fully investigated. In this study the sorption isotherms of PFOS under different electrolytes (Na+ and Ca2＋) was investigated using eight contrasting soils that varied in pH, total organic carbon (TOC) content, clay content and other physico-chemical properties. In addition the sorption behaviour of PFOS was studied at different pH values (3–9) and ionic strengths (0.03 and 0.3 M NaNO3) to determine the role of hydrophobic and electrostatic interactions on PFOS sorption. The effects of possible co-contaminants, lead (Pb) (20.8 mg/L Pb2+) and dissolved organic carbon (DOC, 11.5 mg/L as humic acid) and perfluorooctanoic acid (114 μg/L PFOA) on sorption of PFOS were also investigated. A strongly significant linear relationship (p<0.01) between TOC and the amount of PFOS sorbed was observed irrespective of the background electrolyte index cation, Na+ or Ca2＋. The presence of DOC, and other common co-contaminants like PFOA, and Pb2+ in solution generally increased PFOS sorption by the soils. Sorption of PFOS at different ionic strengths and pH demonstrated that the sorption was dominated by hydrophobic interactions when the TOC content was high, but electrostatic interactions dominated at lower pH values and in soils with smaller TOC contents. This study demonstrates the role of both organic matter and surface chemical properties of soils as key factors influencing PFOS sorption. The use of multiple soil properties to explain the sorption is required.
Investigating the Effect of Polarity Reversal of the Applied Current on Electrochemical Degradation of Per-and Polyfluoroalkyl Substances

Yunlong Luo,Olalekan Simon Awoyemi,Saianand Gopalan,Annette Nolan,Fiona Robinson,Jim Fenstermacher,Lei Xu,Junfeng Niu,Mallavarapu Megharaj,Ravi Naidu,Cheng Fang

DOI: https://doi.org/10.1016/j.jclepro.2023.139691

IF: 11.1

2023-01-01

Journal of Cleaner Production

Abstract:Advanced electrochemical oxidation methods have demonstrated significant potential in degrading per-and polyfluoroalkyl substances (PFAS). However, the widespread application of these techniques is impeded by the long term performance and the limited service life of electrodes. This study introduces a novel approach by investigating the impact of polarity reversal (PR) of the applied current on the electrochemical degradation of perfluorooctanoic acid (PFOA), perfluorooctane sulfonate (PFOS), 6:2 fluorotelomer sulfonate (6:2 F TS), and aqueous film-forming foam (AFFF) samples. A laboratory-scale electrochemical cell equipped with two titanium sub-oxide (Ti4O7) electrodes is used for the experimental investigation. The results indicate 6-h direct current (DC) operation causes fouling and ageing of the electrode (anode) such as the formation of titanium oxide (TiO2). The application of PR effectively mitigates fouling and aging, leading to an enhanced mass transfer and an improved long-term defluorination of PFOA, PFOS, 6:2 FTS, and AFFF samples. The investigation also suggests that PR can help to reduce the energy consumption by similar to 13%. Overall, the application of PR emerges as a promising and practical strategy to augment the electrochemical degradation of PFAS, addressing critical issues related to electrode stability and longevity.
New Insights into the PFAS Defluorination Performance and Mechanism of Ultrasound-Enhanced Electrochemistry with Peroxydisulfate Electrolyte

Yongjia Lei,Lirong Zhao,Yu Tian,Dionissios Mantzavinos,Zongsu Wei,Cheng Fang,Guochun Lv,Mei Huang,Jinsong He,Shihuai Deng,Fei Shen

DOI: https://doi.org/10.1016/j.cej.2024.156928

IF: 15.1

2024-01-01

Chemical Engineering Journal

Abstract:Ultrasound (US)-assisted electrochemical oxidation (EO) has previously demonstrated its ability to degrade perfluorooctanoic acid (PFOA). However, the mechanisms of direct electron transfer and indirect oxidation by reactive oxygen species (ROS), as well as the involvement of these ROS, are unclear, particularly with the peroxydisulfate (PDS) electrolyte and the added effect of US. In this study, an US/EO/PDS system was first investigated, achieving nearly 100 % and 80.01 % defluorination for PFOA and perfluorooctane sulfonate, respectively (within 3 h). This US/EO/PDS system exhibited remarkable stability, pH tolerance, and practicality. Further experimental and theoretical studies revealed that the predominant mechanism of PFOA defluorination was indirect oxidation via ROS, rather than direct oxidation at the anode. Although none of these ROS could initiate the degradation of PFOA without additional energy, both ROS (SO center dot(4) > center dot OH > O-1(2) > O center dot(2)) and US/EO contributed to the initial step of PFOA defluorination. Furthermore, US enhanced the generation of ROS and the direct oxidation (electron transfer) ability of EO. The electrons were transferred from PFOA to PDS via the electrode assembly. This study clarified, for the first time, the synergistic effect of US/EO/PDS and the involvement of direct and indirect ROS oxidation in defluorination of PFOA, which shows potential for developing US and EO technology for complete degradation of polyfluoroalkyl substances.
Investigation on Thermal Characteristics of Novel Composite Sorbent with Carbon Coated Iron As Additive

L. Jiang,R. Z. Wang,A. P. Roskilly

DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2018.04.118

IF: 5.2

2018-01-01

International Journal of Heat and Mass Transfer

Abstract:Carbon coated iron and expanded natural graphite are selected as the additives in developing novel consolidated composite strontium chloride, which is attempted to improve heat and mass transfer performance. Due to anisotropic characteristics, both disk and plate samples are investigated which are parallel and perpendicular to compression direction respectively. It is worth noting that thermal conductivity of composite sorbent increases with the increase of density and the decrease of mass ratio whereas permeability shows a reverse trend. Results demonstrate that the highest thermal conductivity of composite strontium chloride with carbon coated iron could reach 2.95 W m(-1) K-1, which is improved by 14 times when compared with granular salt. Permeability of composite sorbent ranges from 1.2 x 10(-9) m(2) to 4.5 x 10(-14) m(2) when density is in the range between 400 kg m(-1) and 600 kg m(-1). Sorption characteristic of composite sorbent with carbon coated iron is also investigated and compared with that not adding carbon coated iron. Under the condition of -10 degrees C evaporation temperature, sorption reaction rate of composite sorbent with carbon coated iron is better than that without carbon coated iron due to the improved mass transfer performance. Sorption rates of composite sorbents are almost the same when evaporation temperature reaches 10 degrees C. (C) 2018 Elsevier Ltd. All rights reserved.
Temperature–Electrokinetic Co-Driven Perfluorooctane Sulfonic Acid (PFOS) Adsorption on Geo-Adsorbents

Yuzhou Yin,Yongping Shan,Dong Ma,Liuqing Yang,Mingxiu Zhan,Ping Liu,Benzhen Lou,Bo Zhang,Wentao Jiao,Lichu Yin

DOI: https://doi.org/10.3390/pr11061856

IF: 3.5

2023-01-01

Processes

Abstract:Per- and polyfluoroalkyl substances (PFAS) have concerned the public due to their worldwide distribution and the threat they pose to drinking water safety and human health. Temperature and DC field-induced electroosmotic flow (EOF) are powerful tools to regulate organic contaminant adsorption and control PFOS (as a typical PFAS) transport in porous media. However, the co-driven mechanisms of temperature–electrokinetic transport of contaminants are still unclear. Here, we investigated the synergistic mechanisms of temperature–electrokinetic co-driven PFOS adsorption on zeolite and activated carbon as model geo-adsorbents. We found that DC fields increased PFOS adsorption on activated carbon by up to 19.8%, while they decreased PFOS adsorption on zeolite by up to 21.4%. Increasing the temperature decreased the adsorption of PFOS by activated carbon and zeolite. The temperature and electrokinetic synergistically drive EOF velocity to control PFOS adsorption. Synergistic mechanisms of temperature–electrokinetic regulated kinetic and temperature-regulated thermodynamic (the Gibbs free energy change ΔG) and kinetic (liquid viscosity) under various temperatures and DC field situations were analyzed with models. A kinetic approach interlinking viscosity, EOF velocity, and the kinetic adsorption constants was established to interpret the synergistic mechanisms which can be further adopted to estimate temperature–electrokinetic induced PFOS adsorption benefits to mineral and carbonaceous adsorbents. We concluded that such kinetic regulation may provide support for controlling the transmission of PFOS.
Rebuttal to Correspondence on "Penetration of Perfluorooctanesulfonate Isomers and Their Alternatives from Maternal Blood to Milk and Its Associations with Chemical Properties and Milk Primary Components"

Feng Han,Jiaying Liu,Yuxin Wang,Jingguang Li,Bing Lyu,Yunfeng Zhao,Yongning Wu

DOI: https://doi.org/10.1021/acs.est.4c01389

IF: 11.4

2024-03-22

Environmental Science & Technology

Abstract:Environ Sci Technol . 2024 Mar 21. doi: 10.1021/acs.est.4c01389. Online ahead of print. NO

environmental sciences,engineering, environmental
Sorption of Perfluorooctane Sulfonate and Perfluorooctanoate on Activated Carbons and Resin: Kinetic and Isotherm Study

Qiang Yu,Ruiqi Zhang,Shubo Deng,Jun Huang,Gang Yu

DOI: https://doi.org/10.1016/j.watres.2008.12.001

IF: 12.8

2009-01-01

Water Research

Abstract:Perfluorooctane sulfonate (PFOS) and perfluorooctanoate (PFOA) have increasingly attracted global concerns in recent years due to their global distribution, persistence, strong bioaccumulation and potential toxicity. The feasibility of using powder activated carbon (PAC), granular activated carbon (GAC) and anion-exchange resin (AI400) to remove PFOS and PFOA from water was investigated with regard to their sorption kinetics and isotherms. Sorption kinetic results show that the adsorbent size influenced greatly the sorption velocity, and both the GAC and AI400 required over 168h to achieve the equilibrium, much longer than 4h for the PAC. Two kinetic models were adopted to describe the experimental data, and the pseudo-second-order model well described the sorption of PFOS and PFOA on the three adsorbents. The sorption isotherms show that the GAC had the lowest sorption capacity both for PFOS and PFOA among the three adsorbents, while the PAC and AI400 possessed the highest sorption capacity of 1.04mmolg−1 for PFOS and 2.92mmolg−1 for PFOA according to the Langmuir fitting. Based on the sorption behaviors and the characteristics of the adsorbents and adsorbates, ion exchange and electrostatic interaction as well as hydrophobic interaction were deduced to be involved in the sorption, and some hemi-micelles and micelles possibly formed in the intraparticle pores.
Effect of Effluent Organic Matter on the Adsorption of Perfluorinated Compounds Onto Activated Carbon.

Jing Yu,Lu Lv,Pei Lan,Shujuan Zhang,Bingcai Pan,Weiming Zhang

DOI: https://doi.org/10.1016/j.jhazmat.2012.04.073

IF: 13.6

2012-01-01

Journal of Hazardous Materials

Abstract:Effect of effluent organic matter (EfOM) on the adsorption of perfluorooctane sulfonate (PFOS) and perfluorooctanoate (PFOA) onto powdered activated carbon (PAC) was quantitatively investigated at environmentally relevant concentration levels. The adsorption of both perfluorinated compounds (PFCs) onto PAC followed pseudo-second order kinetics and fitted the Freundlich model well under the given conditions. Intraparticle diffusion was found to be the rate-controlling step in the PFC adsorption process onto PAC in the absence and presence of EfOM. The presence of EfOM, either in PFC-EfOM simultaneous adsorption onto fresh PAC or in PFC adsorption onto EfOM-preloaded PAC. significantly reduced the adsorption capacities and sorption rates of PFCs. The pH of zero point of charge was found to be 7.5 for fresh PAC and 4.2 for EfOM-preloaded PAC, suggesting that the adsorbed EfOM imparted a negative charge on PAC surface. The effect of molecular weight distribution of EfOM on the adsorption of PFCs was investigated with two EfOM fractions obtained by ultrafiltration. The low-molecular-weight compounds (<1 kDa) were found to be the major contributors to the significant reduction in PFC adsorption capacity, while large-molecular-weight compounds (>30 kDa) had much less effect on PFC adsorption capacity. (c) 2012 Elsevier B.V. All rights reserved.
Perfluorooctane sulfonate adsorption on powder activated carbon: Effect of phosphate (P) competition, pH, and temperature

Jin Qian,Mengmeng Shen,Peifang Wang,Chao Wang,Kun Li,Jingjing Liu,Bianhe Lu,Xin Tian

DOI: https://doi.org/10.1016/j.chemosphere.2017.05.033

IF: 8.8

Chemosphere

Abstract:Powdered activated carbon (PAC), as an adsorbent, was applied to remove perfluorooctane sulfonate (PFOS) from aqueous solution. Laboratory batch experiments were performed to investigate the influences of phosphate (P) competition, temperature, and pH for PFOS adsorption onto PAC. The results showed that higher temperature favored PFOS adsorption in single and binary systems. The kinetic data fitted very well to the pseudo second-order kinetic model. Thermodynamically, the endothermic enthalpy of the PFOS adsorption in single and binary systems were 125.07 and 21.25 kJ mol-1, respectively. The entropy of the PFOS adsorption in single and binary systems were 0.479 and 0.092 kJ mol-1 K-1, respectively. And the Gibbs constants were negative. These results indicated that the adsorption processes were spontaneous. The adsorption isotherms of PFOS agreed well with the Langmuir model. In the single system, PFOS adsorption decreased with increased pH value. The difference in the amount of PFOS adsorption between the single and binary systems increased at higher pH. Frustrated total internal reflection (FTIR) demonstrated that P competition increased the hydrophilicity of the PAC and the electrostatic repulsion between PFOS and PAC, then the PFOS adsorption amount decreased. It also demonstrated that, at higher temperature, increased PFOS adsorption was mainly due to the higher diffusion rate of PFOS molecules and greater number of active sites opened on the PAC surface.
Cationic surfactants influencing the enhancement of energy efficiency for perfluorooctanoic acid (PFOA) removal in the electrocoagulation-flotation (ECF) system

Yueh-Feng Li,Ting Fang,Yu-Chi Lee,Yu-Jung Liu,Ching-Yao Hu,Shang-Lien Lo

DOI: https://doi.org/10.1016/j.chemosphere.2023.137932

IF: 8.8

2023-01-22

Chemosphere

Abstract:From an environmental perspective, approaching sustainability requires a fundamental conceptual shift from the wastewater treatment process toward integrated treatment systems that consider efficient and effective utilization. This study aims to investigate the effects of different surfactants on the removal of perfluorooctanoic acid (PFOA). We used cationic surfactants as both frothers and collectors in the electrocoagulation-flotation (ECF) method to improve the removal efficiency of PFOA. The results showed that, under a monopolar aluminum electrode and with an initial PFOA concentration of 0.25 mM, the ECF method with decyl-trimethyl-ammonium bromide (DTAB) was able to remove over 98% of PFOA within 10 min. Cationic surfactants with a similar linear alkyl chain shape to PFOA, but a longer chain length, are more effective at removing PFOA through the ECF process. The removal mechanism is thought to involve co-precipitation with aluminum hydroxides through Al–F bonding, co-flotation with cationic surfactants, and mixed micelle formation with cationic surfactants. The optimal conditions were tested in both synthetic and realistic wastewater matrices and produced similar results. It has the potential for real wastewater application. The energy yield (G 50 ) of ECF with 5 mM DTAB is 497 g·kWh −1 , superior to other treatments, and is an extremely energy-effective method for separating PFOA from wastewater.

environmental sciences
Enhanced Mitigation of Membrane Fouling and Degradation of Perfluorooctanoic Acid in the Treatment of Natural Surface Water Through the Application of Dielectric Barrier Discharge/sulfite

Bing Zhang,Jianpeng Li,Xiaoping Wang,Tengfei Ma,Yu Shen,Yu Qin,Yanan Liu,Wenxin Shi

DOI: https://doi.org/10.1016/j.cej.2024.151894

IF: 15.1

2024-01-01

Chemical Engineering Journal

Abstract:The present study employed a dielectric barrier discharge (DBD)/sulfite system to mitigate membrane fouling and enhance the degradation of perfluorooctanoic acid (PFOA) in surface water. Results showed that the membrane flux was remarkably enhanced by 93.6%, and the degradation of PFOA showed an impressive increase of 87.9%. The synergistic redox effect of free radicals, including hydroxyl radical (•OH), sulfate radical (SO4∙-), electron (e-/eaq-), su-peroxide anion radicals (∙O2-), and other radical, played a crucial role in mitigating membrane fouling, accounting for 36.26%, 30.10%, 18.69%, 6.75%, and 8.20%, respectively. The correlation analysis revealed that effective removal of UV254 and TOC emerged as the most crucial factors positively contributing to mitigating membrane fouling. Additionally, SO4∙-, •OH, and eaq- were identified as the primary active substances responsible for attacking PFOA, accounting for 41.30%, 25.20%, and 23.70%, respectively. The degradation pathway of PFOA was proposed through analysis using density functional theory and mass spectrometry, reducing the biotoxicity of its degradation products. This study presents a suitable strategy for simultaneous mitigation of membrane fouling and enhancement of PFOA degradation, which holds great potential for advancing the field of water treatment towards practical applications.
Revealing the Molecular-Level Interactions between Cationic Fluorinated Polymer Sorbents and the Major PFAS Pollutant PFOA

Xiao Tan,Michał Sawczyk,Yixin Chang,Yiqing Wang,Adil Usman,Changkui Fu,Hui Peng,Cheng Zhang,Andrew K. Whittaker,Petr Král

DOI: https://doi.org/10.1021/acs.macromol.1c02435

IF: 5.5

2022-01-14

Macromolecules

Abstract:The development of new technologies for the removal of a family of manufactured chemicals, the per- and polyfluoroalkyl substances (PFAS), from the environment is urgently needed to safeguard public and environmental health. Here we report a fundamental study of the binding mechanisms driven by fluorine–fluorine and electrostatic interactions between perfluorooctanoic acid (PFOA), an important PFAS molecule, and three types of block copolymer sorbents containing individually perfluoropolyether (PFPE) or quaternized ammonium groups, or both functional segments in combination. The results show that both the fluorine–fluorine interactions between the PFPE segment of the block copolymer and the fluorinated tail of the PFOA as well as electrostatic attraction between the quaternized ammonium group and the anionic PFOA headgroup are crucial to achieve effective PFOA sorption from aqueous solutions. The fluorine–fluorine interactions contribute to recognition of PFOA molecules via fluorophilicity, with fast exchange between bound and free PFOA being observed, while the electrostatic interactions can tightly bind PFOA, thus precluding such exchange. Both types of interaction are observed to be rapidly established within 5 min. We show that the sorbents containing both fluorinated and cationic groups have a higher PFOA removal efficiency with potentially improved sorption capacity compared with the sorbents with a single functional group and that the electrostatic attraction is stronger and dominates the fluorine–fluorine interactions when the sorbent is highly charged. Overall, these results provide important insights into designing novel sorbents for rapid and efficient PFAS removal from contaminated environments.

polymer science
Thermodynamic analysis of electric field enhanced CO2 capture by moisture-sensitive quaternary ammonium-based sorbents

Chenglong Hou,Liwei Ding,Zhenya Lai,Jiaying Chen,Hao Dong,Hongkun Lv,Kang Zhang,Tao Wang,Mengxiang Fang

DOI: https://doi.org/10.2298/tsci231204091h

IF: 1.971

2024-01-01

Thermal Science

Abstract:Climate change incurred by the increasing amount of CO2 released into the atmosphere has become a global priority, and triggers the development of carbon capture, utilization, and storage. Low energy requirement and cost by employing moisture swing process make quaternary ammonium-based materials applicable for CO2 capture. The moisture-sensitive sorbents suffer decreased CO2 affinity and cyclic capacities with moderate or high humidity, while water vapor ubiquitously exists in flue gas or ambient air. The effect of applying electric field on CO2 adsorption, especially the water-involved proton transfer step, by quaternary ammonium-based sorbents in the existence of water, is analyzed. The discrepancy in the hydrophilicity between reactant and product species is enhanced by the electric field, which indicates more favorable chemisorption. Thermodynamics of CO2 adsorption coupling interfacial water evaporation under the electric field are depicted with changes of enthalpy and free energy calculated. Therefore, the rationality of electric field enhanced CO2 capture of quaternary ammonium-based sorbents in moist circumstance is theoretically validated, providing the methodology of optimizing moisture swing adsorption from process intensification apart from material design.

thermodynamics
Carbon Adsorbent Properties Impact Hydrated Electron Activity and Perfluorocarboxylic Acid (PFCA) Destruction

Hosea A Santiago-Cruz,Zimo Lou,Jiang Xu,Ryan C Sullivan,Bailey B Bowers,Rachel A Molé,Wan Zhang,Jinghao Li,Joshua S Yuan,Susie Y Dai,Gregory V Lowry

DOI: https://doi.org/10.1021/acsestengg.4c00211

2024-08-02

Abstract:Carbon-based adsorbents used to remove recalcitrant water contaminants, including perfluoroalkyl substances (PFAS), are often regenerated using energy-intensive treatments that can form harmful byproducts. We explore mechanisms for sorbent regeneration using hydrated electrons (eaq -) from sulfite ultraviolet photolysis (UV/sulfite) in water. We studied the UV/sulfite treatment on three carbon-based sorbents with varying material properties: granular activated carbon (GAC), carbon nanotubes (CNTs), and polyethylenimine-modified lignin (lignin). Reaction rates and defluorination of dissolved and adsorbed model perfluorocarboxylic acids (PFCAs), perfluorooctanoic acid (PFOA) and perfluorobutanoic acid (PFBA), were measured. Monochloroacetic acid (MCAA) was employed to empirically quantify eaq - formation rates in heterogeneous suspensions. Results show that dissolved PFCAs react rapidly compared to adsorbed ones. Carbon particles in solution decreased aqueous reaction rates by inducing light attenuation, eaq - scavenging, and sulfite consumption. The magnitude of these effects depended on adsorbent properties and surface chemistry. GAC lowered PFOA destruction due to strong adsorption. CNT and lignin suspensions decreased eaq - formation rates by attenuating light. Lignin showed high eaq - quenching, likely due to its oxygenated functional groups. These results indicate that desorbing PFAS and separating the adsorbent before initiating PFAS degradation reactions will be the best engineering approach for adsorbent regeneration using UV/sulfite.
A mechanical investigation of perfluorooctane acid adsorption by engineered biochar

Yudi Wu,Lin Qi,Gang Chen

DOI: https://doi.org/10.1016/j.jclepro.2022.130742

IF: 11.1

2022-03-01

Journal of Cleaner Production

Abstract:Biochar has been engineered to enhance its adsorption for perfluorooctane acid (PFOA). In this study, adsorption of PFOA by engineered biochar derived from feedstocks of switchgrass, water oak leaves and biosolid was investigated. Biosolid biochar had better PFOA adsorption than those of switchgrass and water oak leaves because it had higher contents of O% (26.16–36.59%) and S% (1.03–3.68%) as well as higher metal contents such as Ca, Cu, and Fe. To enhance PFOA adsorption, the biochar was engineered with additives of FeCl3 and carbon nanotube. Carbon nanotube significantly enhanced the surface area of all the engineered biochar by up to 8.5-fold. On the other hand, FeCl3 increased the porosity, pore volume and surface area of plant-based biochar (i.e., switchgrass and water oak leaves). Three adsorption mechanisms, electrostatic interaction, hydrogen bonding, and hydrophobic interaction were responsible for PFOA adsorption. Based on the results of this study, electrostatic interaction was found to play the most important role. Thermodynamic analysis indicated the spontaneous and exothermic reactions occurred during the PFOA adsorption and X-ray spectroscopy results demonstrated that impregnated Fe exhibited as disordered cluster crystals on the surface of engineered biochar. It was concluded that Fe-engineered biochar could significantly improve PFOA adsorption, which had promising potential applications of PFOA removal during wastewater treatment processes.

environmental sciences,green & sustainable science & technology,engineering, environmental
Sorption of perfluorooctane sulfonate and perfluorooctanoate on activated sludge

Qin Zhou,Shubo Deng,Qiaoying Zhang,Qing Fan,Jun Huang,Gang Yu

DOI: https://doi.org/10.1016/j.chemosphere.2010.08.009

IF: 8.8

2010-01-01

Chemosphere

Abstract:Perfluorinated compounds (PFCs) as one class of emerging pollutants have caused great attention in recent years. In this study, activated sludge was used to adsorb perfluorooctane sulfonate (PFOS) and perfluorooctanoate (PFOA) in aqueous solution in order to investigate their sorption behavior and possible uptake mechanism in wastewater treatment plants (WWTPs). Batch experiments including sorption kinetics, isotherm, and effect of solution pH and temperature were carried out. The sorption kinetics indicated that the equilibrium was reached within about 11h. The effect of pH and the zeta potential measurement implied that electrostatic repulsion prevented their sorption, but the protein composition on the heterogeneous surface of activated sludge was favorable for the sorption of PFOS and PFOA. The sorption isotherms of PFOS and PFOA as well as the comparative sorption of other PFCs with different CF chain length and different functional groups suggested that hydrophobic interaction also participated in the sorption process. Additionally, the active sorption on the living microorganism was also observed. The calculated distribution coefficient indicated that PFOS had a higher sorption tendency to activated sludge than PFOA.
Effects of different factors on photodefluorination of perfluorinated compounds by hydrated electrons in organo-montmorillonite system

Haoting Tian,Cheng Gu

DOI: https://doi.org/10.1016/j.chemosphere.2017.10.074

IF: 8.8

Chemosphere

Abstract:Perfluorinated compounds (PFCs) are considered as the most recalcitrant organic contaminants. Our previous research has shown that PFCs can be completely defluorinated in the UV/organoclay/3-indole acetic acid system, however, the factors that could affect the degradation of PFCs, are still not clear. In this study, we further investigated the effect of different indole derivatives and organo-modified montmorillonite on the degradation of perfluooctanoic acid (PFOA). Based on multiple linear regression analysis, our results clearly indicate that hydrated electron yields of indole derivatives, adsorption of PFOA and indole derivatives on organo-montmorillonite contributed independently to the degradation of PFOA. In addition, the results also show that the presence of humic substance (even at 10 mg C L-1) would not significantly suppress the degradation process due to the strong adsorption of humic substance on the organo-montmorillonite surface. This study would provide more information to design an efficient and environment-friendly system for degradation of PFCs, and this technique will have great potential for treatment of persistent contaminants under mild reaction conditions.
Efficient removal of per/polyfluoroalkyl substances from water using recyclable chitosan-coated covalent organic frameworks: Experimental and theoretical methods

Xue Zhang,Shiyi Wang,Xingyi Zhu,Donghai Zhu,Wei Wang,Bin Wang,Shubo Deng,Gang Yu

DOI: https://doi.org/10.1016/j.chemosphere.2024.141942

IF: 8.8

2024-04-16

Chemosphere

Abstract:Covalent organic frameworks (COFs) demonstrate remarkable potential for adsorbing per/polyfluoroalkyl substances (PFAS). Nevertheless, the challenge of recycling powdered COFs hampers their practical application in water treatment. In this research, a quaternary amine COF with inherent positive surface charge was synthesised to adsorb perfluorooctanoic acid (PFOA) via electrostatic interactions. The COF was then combined with chitosan (CS) through a simple dissolution-evaporation process, resulting in a composite gel material termed COF@CS. The findings indicated that the adsorption capacity of COF@CS significantly surpassed that of the original COF and CS. According to the Langmuir model, COF@CS achieved a maximum PFOA capacity of 2.8 mmol g −1 at pH 5. Furthermore, the adsorption rate increased significantly to 6.2 mmol g −1 h −1 , compared to 5.9 mmol g −1 h −1 for COF and 3.4 mmol g −1 h −1 for CS. Notably, COF@CS exhibited excellent removal efficacy for ten other types of PFAS. Moreover, COF@CS could be successfully regenerated using a mixture of 70% ethanol and 1 wt% NaCl, and it exhibited stable reusability for up to five cycles. X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR) characterisation, and theoretical calculations revealed that the quaternary amine functional group in COF served as the primary adsorption site in the composite gel material, while the protonated amino group on CS enhanced PFOA adsorption through electrostatic interaction. This study highlights the significant practical potential of COF@CS in the removal of PFAS from aqueous solution and environmental remediation.

environmental sciences

Rebuttal to Correspondence on "Effects of Temperature and DC Electric Fields on Perfluorooctanoic Acid Sorption Kinetics to Activated Carbon"

Correspondence on "Effects of Temperature and DC Electric Fields on Perfluorooctanoic Acid Sorption Kinetics to Activated Carbon"

Effects of Temperature and DC Electric Fields on Perfluorooctanoic Acid Sorption Kinetics to Activated Carbon

The Effects of Soil Properties and Co-Contaminants on Sorption of Perfluorooctane Sulfonate (PFOS) in Contrasting Soils

Investigating the Effect of Polarity Reversal of the Applied Current on Electrochemical Degradation of Per-and Polyfluoroalkyl Substances

New Insights into the PFAS Defluorination Performance and Mechanism of Ultrasound-Enhanced Electrochemistry with Peroxydisulfate Electrolyte

Investigation on Thermal Characteristics of Novel Composite Sorbent with Carbon Coated Iron As Additive

Temperature–Electrokinetic Co-Driven Perfluorooctane Sulfonic Acid (PFOS) Adsorption on Geo-Adsorbents

Rebuttal to Correspondence on "Penetration of Perfluorooctanesulfonate Isomers and Their Alternatives from Maternal Blood to Milk and Its Associations with Chemical Properties and Milk Primary Components"

Sorption of Perfluorooctane Sulfonate and Perfluorooctanoate on Activated Carbons and Resin: Kinetic and Isotherm Study

Effect of Effluent Organic Matter on the Adsorption of Perfluorinated Compounds Onto Activated Carbon.

Perfluorooctane sulfonate adsorption on powder activated carbon: Effect of phosphate (P) competition, pH, and temperature

Cationic surfactants influencing the enhancement of energy efficiency for perfluorooctanoic acid (PFOA) removal in the electrocoagulation-flotation (ECF) system

Enhanced Mitigation of Membrane Fouling and Degradation of Perfluorooctanoic Acid in the Treatment of Natural Surface Water Through the Application of Dielectric Barrier Discharge/sulfite

Revealing the Molecular-Level Interactions between Cationic Fluorinated Polymer Sorbents and the Major PFAS Pollutant PFOA

Thermodynamic analysis of electric field enhanced CO2 capture by moisture-sensitive quaternary ammonium-based sorbents

Carbon Adsorbent Properties Impact Hydrated Electron Activity and Perfluorocarboxylic Acid (PFCA) Destruction

A mechanical investigation of perfluorooctane acid adsorption by engineered biochar

Sorption of perfluorooctane sulfonate and perfluorooctanoate on activated sludge

Effects of different factors on photodefluorination of perfluorinated compounds by hydrated electrons in organo-montmorillonite system

Efficient removal of per/polyfluoroalkyl substances from water using recyclable chitosan-coated covalent organic frameworks: Experimental and theoretical methods