Levetiracetam-mediated emotional behavior in heterozygous rolling Nagoya CaV2.1 channel mutant mice

Eiki Takahashi,K. Niimi,Chitoshi Itakura

DOI: https://doi.org/10.1016/j.pbb.2010.05.020

2010-09-01

Abstract:

What problem does this paper attempt to address?

Size- and Structure-Controlled Synthesis and Characterization of Nickel Nanoparticles

Yuanzhi Chen,Xiaohua Luo,Houde She,Guang-Hui Yue,Dong-Liang Peng

DOI: https://doi.org/10.1166/jnn.2009.1206

2009-01-01

Journal of Nanoscience and Nanotechnology

Abstract:Nearly monodisperse face-centered cubic (fcc) and hexagonal close-packed (hcp) nickel nanoparticles have been prepared via the thermal decomposition of nickel organometallic precursors in a reaction mixture containing alkylamine, and characterized by powder X-ray diffraction, transmission electron microscopy and magnetic measurement. The employed alkylamine can serve as both solvent and reducing agent. The as-synthesized nickel nanoparticles are air-stable, and their sizes can be readily tuned by the variation of surfactant concentration and reaction temperature. The crystalline phase control was achieved by adjusting alkylamine concentration, heating rate and reaction temperature. Magnetic measurements showed that hcp Ni nanoparticles have quite different magnetic properties compared to fcc Ni nanoparticles.
Tailoring A Magnetically Separable Nife2o4 Nanoparticle Catalyst for Knoevenagel Condensation

Qichen Li,Xiaozhong Wang,Yanyun Yu,Yingqi Chen,Liyan Dai

DOI: https://doi.org/10.1016/j.tet.2016.11.011

IF: 2.388

2016-01-01

Tetrahedron

Abstract:A magnetically separable NiFe2O4 nanoparticle catalyst was prepared readily via a simple one-step hydrothermal process. The catalytic performance of this hetero-nanostructure was investigated by Kneovenagel condensation with aldehydes and active methylene compounds under mild conditions. The newly designed catalyst exhibited a prominent catalytic activity with 99.5% conversion, 99% selectivity and excellent yields, which is compatible with various aldehydes and active methylene compounds with good conversion and high selectivity as well. This easily separated hybrid (NiFe2O4), by exerting an external magnetic field, could be recycled for eight times without significant loss, which started a new era for low-cost fabrication of CC bond for extending usage in a large scale, especially in pharmaceutical and cosmetics industry.
Synthesis of iron–nickel nanoparticles via a nonaqueous organometallic route

Yuanzhi Chen,Xiaohua Luo,Guang-Hui Yue,Xuetao Luo,Dong-Liang Peng

DOI: https://doi.org/10.1016/j.matchemphys.2008.07.118

IF: 4.778

2009-01-01

Materials Chemistry and Physics

Abstract:Fe–Ni nanoparticles have been synthesized via a nonaqueous solution-phase approach using thermal decomposition of Ni(II) acetylacetonate and Fe(III) acetylacetonate in oleylamine without further reducing agents. The analyses of powder X-ray diffraction and transmission electron microscopy show that the as-synthesized Fe–Ni nanoparticles possess a face-centered cubic (fcc) crystalline structure and exhibit a polydispersed characteristic. The particle morphology and size distribution can be further controlled by introducing surfactants in the reaction system, and the final chemical composition also can be tuned to some extent by varying the initial molar ratios of metal precursors. Room temperature magnetic measurements reveal a ferromagnetic characteristic for the as-synthesized nanoparticles. An increased saturation magnetization has been observed with increasing Fe contents.
Preparation and magnetic properties of nickel nanoparticles via the thermal decomposition of nickel organometallic precursor in alkylamines

Yuanzhi Chen,Dong-Liang Peng,Dongxing Lin,Xiaohua Luo

DOI: https://doi.org/10.1088/0957-4484/18/50/505703

IF: 3.5

2007-01-01

Nanotechnology

Abstract:Nickel nanoparticles were prepared from the thermal decomposition of nickel(II) acetylacetonate in alkylamines and characterized by powder x-ray diffraction, transmission electron microscopy and magnetic measurement. The reaction temperature, heating rate and solvent type play an important role in the control over the crystalline phase. Depending on the reaction conditions, face-centered cubic (fee) or hexagonal close-packed (hcp) nickel nanoparticles can be obtained. Monodisperse nickel nanoparticles were also obtained by introducing surfactants. The results of magnetic characterization showed that the magnetic properties of the hcp nickel nanoparticles are quite different from those of the fee nickel nanoparticles.
Chemical Synthesis of Monodisperse Fe-Ni Nanoparticles Via A Diffusion-Based Approach

Yuanzhi Chen,Houde She,Xiaohua Luo,Guang-Hui Yue,Wen-Bo Mi,Hai-Li Bai,Dong-Liang Peng

DOI: https://doi.org/10.1166/jnn.2010.2181

2010-01-01

Journal of Nanoscience and Nanotechnology

Abstract:We report a chemical route for the preparation of monodisperse Fe-Ni nanoparticles with tunable compositions and sizes. Unlike commonly used synthetic approaches that involve the simultaneous reduction of metal precursors in the presence of reducing agents, the approach developed in this study utilizes pre-formed Ni nanoparticles to react with Fe(III) acetylacetonate in high boiling-point solvents, wherein newly-generated Fe atoms diffuse into Ni nanoparticles to form Fe-Ni nanoparticles. The analytic results of powder X-ray diffraction (XRD) and transmission electron microscopy (TEM) show that the as-synthesized Fe-Ni nanoparticles possess a face-centered cubic (fcc) crystalline structure and have a spherical or near-spherical morphology. X-ray photoelectron spectroscopy (XPS) study reveals metallic characteristics for the chemical state of Fe and Ni. The particle morphology and size distribution of the as-synthesized Fe-Ni nanoparticles are regulated by the pre-formed Ni nanoparticles, while the composition can be adjusted to some extent by the ratio of Fe precursor to Ni nanoparticles. Magnetic measurements reveal a superparamagnetic characteristic above the blocking temperature for the as-synthesized Fe-Ni nanoparticles. The synthetic approach may also be applied to other bimetallic nanoparticle systems.
Conversion of Conventional NiO Powders into Nanostructures by a Simple Chemical Method

JQ Qi,T Zhang,M Lu,Y Wang,WP Chen,LT Li,HLW Chan

DOI: https://doi.org/10.1246/cl.2005.180

2005-01-01

Chemistry Letters

Abstract:We report the synthesis of nanostructured nickel oxide and nickel hydroxide from conventional NiO powders onto different substrates by a chemical method which simply involves dissolving and decomposition steps. Scanning electron microscope (SEM) observations have revealed various morphologies of the nanostructures on different substrates. With the described method, no impurity residue will remain on the substrates, hence requiring no additional washing and separation processing.
Size-controlled Synthesis of Nickel Nanoparticles

Y Hou,H Kondoh,T Ohta,S Gao

DOI: https://doi.org/10.1016/j.apsusc.2004.09.045

IF: 6.7

2005-01-01

Applied Surface Science

Abstract:A facile reduction approach with nickel acetylacetonate, Ni(acac)2, and sodium borohydride or superhydride leads to monodisperse nickel nanoparticles in the presence of hexadecylamine (HDA) and trioctylphosphine oxide (TOPO). The combination of HDA and TOPO used in the conventional synthesis of semiconductor nanocrystals also provides better control over particle growth in the metal nanoparticle synthesis. The size of Ni nanoparticles can be readily tuned from 3 to 11nm, depending on the ratio of HDA to TOPO in the reaction system. As-synthesized Ni nanoparticles have a cubic structure as characterized by power X-ray diffraction (XRD), selected-area electron diffraction (SAED). Transmission electron microscopy (TEM) images show that Ni nanoparticles have narrow size distribution. SQUID magnetometry was also used in the characterization of Ni nanoparticles. The synthetic procedure can be extended to the preparation of high quality metal or alloy nanoparticles.
Preparation and Characterization of Mono-disperse Spherical Nickel Particles

HUANG Guo-yong,XU Sheng-ming,XU Gang,LI Lin-yan,CHEN Song-zhe

DOI: https://doi.org/10.3321/j.issn:1009-606x.2007.06.013

2007-01-01

Abstract:Mono-disperse spherical nickel particles were synthesized by liquid phase reduction method with nickel sulfate as raw material,hydrazine as reductive agent,and sodium hydroxide as adjusting pH value of the solution.The prepared powder samples were characterized by means of X-ray diffraction(XRD),scanning electron microscopy(SEM),thermo-gravimetry(TG) and X-ray photoelectron spectroscopy(XPS).The results indicated that the high purity spherical particles had the face-centered cubic(fcc) crystal structure and their final diameters were between 100 and 400 nm with narrow size distribution.The optimal technological conditions were obtained as that the concentration of Ni2+ was 0.35 mol/L,the ratio [N2H4]/[Ni2+] 4.0,the ratio [NaOH]/[Ni2+] 2.5,and the reaction temperature 80℃.Moreover,the original concentration of nickel controlled the shape,size and agglomeration of the nickel particles,the temperature controlled the reaction rate,and the amounts of NaOH and hydrazine affected the purity of nickel powder.
Studies on the Chemical Synthesis of Nanosized Nickel Powder and its Stability

Kan-Sen Chou,Kuo-Cheng Huang

DOI: https://doi.org/10.1023/A:1017940804321

IF: 2.533

2001-01-01

Journal of Nanoparticle Research

Abstract:The synthesis of nanosized nickel colloids is investigated by using nickel chloride as the precursor, hydrazine as the reducing agent and palladium as the nucleation agent. High purity nickel can be obtained when the reaction temperature is above 80 ° C. At a lower reaction temperature, nickel hydroxide is also present in the precipitate form. Starting concentration of nickel ion is a dominant factor in affecting colloidal sizes, while other parameters such as reaction temperature and quantity of poly(vinyl pyrrolidone) (PVP) exhibit only minor effects. Although PVP has some dispersion power, it is not capable of preventing nickel colloids from gradual agglomeration. Our study shows that the subsequent addition of poly(acrylic acid) (PAA) after synthesis can help to stabilize the nickel suspension. This stabilized suspension can then be de-stabilized by changing pH to lower than 4 and vice versa. This reversible stabilization–de-stabilization process is likely due to the behaviour of PVP–PAA complex in the aqueous solutions.
Preparation of copper monosulfide and nickel monosulfide nanoparticles by sonochemical method

Hui Wang,Jian-Rong Zhang,Xiao-Ning Zhao,Shu Xu,Jun-Jie Zhu

DOI: https://doi.org/10.1016/S0167-577X(01)00656-5

IF: 3

2002-01-01

Materials Letters

Abstract:This paper presents a novel method for the preparation of copper monosulfide (CuS) and nickel monosulfide (NiS) nanoparticles via a sonochemical route from an aqueous solution containing metal acetate [Cu(CH3COO)2 or Ni(CH3COO)2] and thioacetamide (TAA) in the presence of triethanolamine (TEA) as a complexing agent under ambient air. The products were characterized by X-ray powder diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and energy-dispersive X-ray analysis (EDAX). The as-prepared nanoparticles have regular shape, narrow size distribution and high purity. It is found to be a mild, convenient and efficient method for the preparation of CuS and NiS nanoparticles.
Effect of surfactants on dispersion property and morphology of nano-sized nickel powders

guoyong huang,x u shengming,l i linyan,xuejun wang

DOI: https://doi.org/10.1016/S1003-6326(14)63523-8

IF: 3.752

2014-01-01

Transactions of Nonferrous Metals Society of China

Abstract:Fine face-centered cubic (FCC) nickel powders were synthesized by liquid phase reduction with different surfactants. The products were investigated by scanning electron microscopy (SEM), laser particle size analyzer and X-ray powder diffraction (XRD). The results indicate that the type, dosage and relative molecular mass of surfactants significantly impact the purity, dispersion property, particle size, size distribution and morphology of the products. The nonionic surfactants poly ethylene glycol (PEG) and polyethylene glycol sorbitan monostearate (Tween) showed better dispersing ability in the reaction system than the others. The optimal mass ratios of surfactant to Ni are 100 mg/g and 150 mg/g for PEG-600 and Tween-40, respectively. The products obtained in the optimal conditions have ideal morphology and narrow size distribution. Moreover, study on the relative molecular mass effect revealed that with the increase of the relative molecular mass of Tween, the morphology of nickel powders changed from sphere to spiny ball.
A mild aqueous synthesis of ligand-free copper nanoparticles for low temperature sintering nanopastes with nickel salt assistance

Hiroshi Imamura,Yoichi Kamikoriyama,Atsushi Muramatsu,Kiyoshi Kanie

DOI: https://doi.org/10.1038/s41598-021-03707-9

2021-12-20

Abstract:An organic ligand-free aqueous-phase synthesis of copper (Cu) nanoparticles (NPs) under an air atmosphere was successfully achieved by reducing copper(II) oxide particles with a leaf-like shape in the presence of Ni salts at room temperature. The resulting Cu NPs with a mean particle diameter of ca. 150 nm exhibited low-temperature sintering properties due to their polycrystalline internal structure and ligand-free surface. These Cu NPs were applied to obtain Cu NP-based nanopastes with low-temperature sintering properties, and the resistivities of the obtained Cu electrodes after annealing at 150 °C and 200 °C for 30 min were 64 μΩ∙cm and 27 μΩ∙cm, respectively. The bonding strength between oxygen-free Cu plates prepared using the Cu NP-based nanopastes reached 32 MPa after pressure-less sintering at 260 °C for 30 min under a nitrogen atmosphere. The developed manufacturing processes using the developed Cu nanopastes could provide sustainable and low-CO2-emission approaches to obtain Cu electrodes on flexible films and high-strength bonding between metal plates as die-attach materials for power devices under energy- and resource-saving conditions.
Effects on Direct Synthesis of Large Scale Mono-Disperse Ni0.5zn0.5fe2o4 Nanosized Particles

Xia Li,Qiang Li,Zhiguo Xia,Wenxun Yan

DOI: https://doi.org/10.1016/j.jallcom.2007.04.214

IF: 6.2

2008-01-01

Journal of Alloys and Compounds

Abstract:Mono-disperse Ni0.5Zn0.5Fe2O4 spinel ferrite particles have been synthesized directly via the hydrothermal method using sodium dodecyl sulfate (SDS) as surfactant. Particle size could be varied from 6 to 19nm by changing the experiment parameters. X-ray diffraction, high resolution TEM images confirmed the high crystallinity of ferrite nanocrystals. The effects of precursor suspension pH value, reaction temperature and surfactant (SDS) concentration on phase purity, particle size and dispersed property were discussed. The results indicated that mono-disperse Ni0.5Zn0.5Fe2O4 spinel ferrite nanoparticle had been obtained at pH value range (8–9), reaction temperature (90°C) and moderate SDS concentration (>0.2mM). The magnetic measurement shows that as prepared Ni0.5Zn0.5Fe2O4 nanoparticle possesses good super-paramagnetic behavior. We also put forward a primary experimental model to shed light on the controllability of the monodispersity of the nanosized particles.
Synthesis, spectral analysis, crystal structure, Hirshfeld surface analyses, thermal behavior of two new nickel complexes and usage as precursor for preparation of Ni/NiO nanoparticles

M. Tavassoli,M. Montazerozohori,A. Masoudiasl,Z. Akbari,Th. Doert,E.M. Vazquez Lopez,S.J. Fatemi

DOI: https://doi.org/10.1016/j.poly.2019.114287

IF: 2.975

2020-01-01

Polyhedron

Abstract:In this paper, sonochemical synthesis under ultrasonic conditions and characterization of two new nickel(II) complexes of diethylenetriamine (dien), [(Ni(dien)2Br2]·H2O and bis(p-methoxycinnamaldehydene) diethylenetriamine (L), [NiL(NO3)2] are reported. The structural determination of both compounds by X-ray crystallography approved hexa-coordinated Ni(II) with distorted octahedral geometry. In the compound [NiL(NO3)2], the nitrate groups act as both bidentate and monodentate ligand. N3-donor sets of the dien and the dien-based Schiff base ligand are coordinated to Ni(II) ion in meridional and facial way, respectively. The crystal packing and Hirshfeld surface analyses showed the essential role of the nitrate groups of [NiL(NO3)2] and the two bromine anions and the water molecule of [Ni(dien)2]Br2·H2O in the organization of the supramolecular structures. Three types of intermolecular interactions including OH⋯Br, NH⋯Br and CH⋯Br were found in the complex [(Ni(dien)2Br2]·H2O. The effects of change of the precipitation conditions on the morphology and size of the nickel complexes was monitored by scanning electron microscopy (SEM). Moreover, the thermal behaviors of the complexes were investigated. The calcination of the [Ni(dien)2]Br2·H2O complex under air led to production of Ni/NiO nanoparticles.

chemistry, inorganic & nuclear,crystallography
Optimization of Hydrothermal Synthesis of Nickel Oxide with Flower-Like Structure

Thuy Thi Bich Tran,Eui-Jeong Park,Jong-Tae Son

DOI: https://doi.org/10.1007/s11814-024-00070-z

IF: 2.7

2024-02-21

Korean Journal of Chemical Engineering

Abstract:Herein, nano-flower NiO is successfully fabricated via a simple hydrothermal process using urea and nickel(II) nitrate as reactants, followed by a calcination reaction. Final products with different morphologies are obtained by varying the molar ratio of the reactants, varying the solvent, and using a surfactant. The results reveal that the NiO particles obtained using a molar ratio of 1:2 (Ni: urea) in a mixture of water and ethanol as the solvent and in the presence of cetyl trimethyl ammonium bromide (CTAB) exhibit the best uniformity and an excellent BET specific surface area of 62.97 m 2 g –1 . The increase in uniformity and decrease in particle size can be attributed to the ethanol in the solvent, which slows ion diffusion in the solution and CTAB, thereby controlling the growth of particles.

engineering, chemical,chemistry, multidisciplinary
Reduction of Ni 2+ by Hydrazine in Solution for the Preparation of Nickel Nano-Particles

Zhiyu Li,Chenghui Han,Jianyi Shen

DOI: https://doi.org/10.1007/s10853-005-5874-z

IF: 4.5

2006-01-01

Journal of Materials Science

Abstract:The reduction of Ni2+ by hydrazine in solution for the preparation of nickel nano-particles has been studied. It was found that the reactions occur in two stages. The first stage is the reduction of Ni2+ by N2H4 according to 2Ni2+ + N2H4 + 4OH− = 2Ni↓ + N2↑+ 4H2O, while the second stage consists of two side reactions, the decomposition of hydrazine (N2H4 = N2↑ + 2H2↑) and the disproportionation of hydrazine (3N2H4 = N2↑ + 4NH3↑) catalyzed by the formed nickel nano-particles. The reaction for the formation of nickel is also catalyzed by nickel as an autocatalytic reaction. Accordingly, a small amount of inducing agent, NaBH4 can be added to initiate the reaction that can then proceed continuously at 288 K. Kinetic study reveals that the reaction orders with respect to Ni2+, N2H4 and Ni are 1, 0 and 1, respectively. Thus, the increase of the initial concentration of Ni2+ and the amount of inducing agent used accelerate the reaction rate and decrease the consumption of N2H4 significantly. Pure nickel nano-particles with high surface areas are produced and the surface area can increase from 18 to 79 m2/g with the increase of concentration of Ni2+ used. The fully understanding of the reaction between Ni2+ and hydrazine in solution may provide a new optimized technique to prepare the nickel catalysts with high surface areas, in addition to the currently available techniques for the preparation of Raney nickel and supported nickel catalysts.
Preparation of Fine Nickel Powders Via Reduction of Nickel Hydrazine Complex Precursors

Huang Guo-yong,Xu Sheng-ming,Xu Gang,Li Lin-yan,Zhang Li-feng

DOI: https://doi.org/10.1016/s1003-6326(08)60283-6

2009-01-01

Abstract:Fine nickel（Ni） powders with controllable particle sizes were synthesized via the reduction of nickel hydrazine complex precursors of pure [Ni（N2H4）2]Cl2 and a mixture of [Ni（N2H4）2]Cl2 and [Ni（N2H4）3]Cl2 in aqueous solution. The mechanism of the formation of metallic Ni powders experiences the reduction of nickel hydroxide by hydrazine released from the ligand exchange reaction between nickel hydrazine complex and NaOH. In comparison with the method of preparing Ni powders from nickel salts,the method of making Ni powders via the reduction of nickel hydrazine complex precursors shows the advantages of using half dosage of hydrazine for complete reduction of nickel ions in solution,and the obtained Ni particles show less agglomeration and better dispersibility. Moreover,the average particle size of nickel powders can be controlled from 180 to 260 nm by adjusting the reaction molar ratio and concentration.
A new method to synthesize nickel carbide (Ni3C) nanoparticles in solution

Yonghua Leng,Huaiyu Shao,Yuntao Wang,Masaaki Suzuki,Xingguo Li

Abstract:Pure nickel carbide (Ni3C) nanoparticles with particle diameters of 40 nm have been prepared by thermal decomposition of nickel formate in the presence of oleic acid and oleyl amine. The coexistence of active nickel and active carbon plays an important role in the formation of metastable Ni3C. Ni3C powder decomposes at 770 K in an N2 atmosphere to yield nickel and carbon. While in an H2 atmosphere, Ni3C powder is converted into Ni at 627 K. In addition, Ni3C nanoparticles exhibit superparamagnetism and are easier to magnetize at room temperature due to their good crystallinity and few defects.
In situ thermal decomposition route: Preparation and characterization of nano nickel, cobalt, and copper oxides using an aromatic amine complexes as a low-cost simple precursor

Moamen S. Refat,Soha F. Mohamed,Tariq A. Altalhi,Safyah B. Bakare,Ghaferah H. Al-Hazmi

DOI: https://doi.org/10.2478/pjct-2021-0016

2021-06-01

Polish Journal of Chemical Technology

Abstract:Abstract The main interest now is the development of metallic or inorganic-organic compounds to prepare nanoparticle materials. The use of new compounds could be beneficial and open a new method for preparing nanomaterials to control the size, shape, and size of the nanocrystals. In this article, the thermal decomposition of [M 2 (o-tol) 2 (H 2 O) 8 ] Cl 4 (where o-tol is ortho -tolidine compound, M = Ni 2+ , Co 2+ , Cu 2+ ) new precursor complex was discussed in solid-state conditions. The thermal decomposition route showed that the synthesized three complexes were easily decomposed into NiO, Co 3 O 4 and CuO nanoparticles. This decomposition was performed at low temperatures (~600°C) in atmospheric air without using any expensive and toxic solvent or complicated equipment. The obtained product was identified by Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), transmission electron microscopy (TEM) and energy-dispersive X-ray spectroscopy (EDX). FT-IR, XRD and EDX analyses revealed that the NiO nanoparticles exhibit a face-centered-cubic lattice structure with a crystallite size of 9–12 nm. The formation of a highly pure spinel-type Co 3 O 4 phase with cubic structure showed that the Co 3 O 4 nanoparticles have a sphere-like morphology with an average size of 8–10 nm. The XRD patterns of the CuO confirmed that the monoclinic phase with the average diameter of the spherical nanoparticles was approximately 9–15 nm.

engineering, chemical,chemistry, applied
Tailoring of Ultrasmall NiMnO3 Nanoparticles: Optimizing Synthesis Conditions and Solvent Effects

Svetlana Saikova,Diana Nemkova,Anton Krolikov,Aleksandr Pavlikov,Mikhail Volochaev,Aleksandr Samoilo,Timur Ivanenko,Artem Kuklin

DOI: https://doi.org/10.3390/molecules29204846

IF: 4.6

2024-10-14

Molecules

Abstract:Nickel manganese oxide (NiMnO3) combines magnetic and dielectric properties, making it a promising material for sensor and supercapacitor applications, as well as for catalytic water splitting. The efficiency of its utilization is notably influenced by particle size. In this study, we investigate the influence of thermal treatment parameters on the phase composition of products from alkali co-precipitation of nickel and manganese (II) ions and identify optimal conditions for synthesizing phase-pure nickel manganese oxide. Ultrafine nanoparticles of NiMnO3 (with sizes as small as 2 nm) are obtained via liquid-phase ultrasonic dispersion, exhibiting a narrow size distribution. A systematic exploration of the solvent nature (water, N-methyl-2-pyrrolidone, dimethyl sulfoxide, dimethylformamide) on the efficiency of ultrasonic dispersion of NiMnO3 nanoparticles is provided. It is demonstrated that particle size is influenced not only by absorbed acoustic power, dependent on the physical properties of the used solvent (boiling temperature, gas solubility, viscosity, density) but also by the chemical stability of the solvent under prolonged ultrasonic treatment. Our findings provide insights for designing ultrasonic treatment protocols for nanoparticle dispersions with tailored particle sizes.

chemistry, multidisciplinary,biochemistry & molecular biology

Levetiracetam-mediated emotional behavior in heterozygous rolling Nagoya CaV2.1 channel mutant mice

Size- and Structure-Controlled Synthesis and Characterization of Nickel Nanoparticles

Tailoring A Magnetically Separable Nife2o4 Nanoparticle Catalyst for Knoevenagel Condensation

Synthesis of iron–nickel nanoparticles via a nonaqueous organometallic route

Preparation and magnetic properties of nickel nanoparticles via the thermal decomposition of nickel organometallic precursor in alkylamines

Chemical Synthesis of Monodisperse Fe-Ni Nanoparticles Via A Diffusion-Based Approach

Conversion of Conventional NiO Powders into Nanostructures by a Simple Chemical Method

Size-controlled Synthesis of Nickel Nanoparticles

Preparation and Characterization of Mono-disperse Spherical Nickel Particles

Studies on the Chemical Synthesis of Nanosized Nickel Powder and its Stability

Preparation of copper monosulfide and nickel monosulfide nanoparticles by sonochemical method

Effect of surfactants on dispersion property and morphology of nano-sized nickel powders

A mild aqueous synthesis of ligand-free copper nanoparticles for low temperature sintering nanopastes with nickel salt assistance

Effects on Direct Synthesis of Large Scale Mono-Disperse Ni0.5zn0.5fe2o4 Nanosized Particles

Synthesis, spectral analysis, crystal structure, Hirshfeld surface analyses, thermal behavior of two new nickel complexes and usage as precursor for preparation of Ni/NiO nanoparticles

Optimization of Hydrothermal Synthesis of Nickel Oxide with Flower-Like Structure

Reduction of Ni 2+ by Hydrazine in Solution for the Preparation of Nickel Nano-Particles

Preparation of Fine Nickel Powders Via Reduction of Nickel Hydrazine Complex Precursors

A new method to synthesize nickel carbide (Ni3C) nanoparticles in solution

In situ thermal decomposition route: Preparation and characterization of nano nickel, cobalt, and copper oxides using an aromatic amine complexes as a low-cost simple precursor

Tailoring of Ultrasmall NiMnO3 Nanoparticles: Optimizing Synthesis Conditions and Solvent Effects