Inference about a nonstationary process.

J. O. Chinnis,C. Peterson

DOI: https://doi.org/10.1037/H0026076

1968-08-01

Journal of Experimental Psychology

Abstract:

What problem does this paper attempt to address?

Machine diagnosis of chronic obstructive pulmonary disease using a novel fast-response capnometer

Leeran Talker,Daniel Neville,Laura Wiffen,Ahmed B Selim,Matthew Haines,Julian C Carter,Henry Broomfield,Rui Hen Lim,Gabriel Lambert,BRS Study Team,Scott T Weiss,Gail Hayward,Thomas Brown,Anoop Chauhan,Ameera X Patel,Jonathon Winter,Andrew Gribbin,Milan Chauhan,Ruth De Vos,Paul Kalra,Selina Begum,Barbara Robinson,Bernadette Mundy,Heather Rutter,Karen Madronal

DOI: https://doi.org/10.1186/s12931-023-02460-z

2023-06-02

Abstract:Background: Although currently most widely used in mechanical ventilation and cardiopulmonary resuscitation, features of the carbon dioxide (CO2) waveform produced through capnometry have been shown to correlate with V/Q mismatch, dead space volume, type of breathing pattern, and small airway obstruction. This study applied feature engineering and machine learning techniques to capnography data collected by the N-Tidal™ device across four clinical studies to build a classifier that could distinguish CO2 recordings (capnograms) of patients with COPD from those without COPD. Methods: Capnography data from four longitudinal observational studies (CBRS, GBRS, CBRS2 and ABRS) was analysed from 295 patients, generating a total of 88,186 capnograms. CO2 sensor data was processed using TidalSense's regulated cloud platform, performing real-time geometric analysis on CO2 waveforms to generate 82 physiologic features per capnogram. These features were used to train machine learning classifiers to discriminate COPD from 'non-COPD' (a group that included healthy participants and those with other cardiorespiratory conditions); model performance was validated on independent test sets. Results: The best machine learning model (XGBoost) performance provided a class-balanced AUROC of 0.985 ± 0.013, positive predictive value (PPV) of 0.914 ± 0.039 and sensitivity of 0.915 ± 0.066 for a diagnosis of COPD. The waveform features that are most important for driving classification are related to the alpha angle and expiratory plateau regions. These features correlated with spirometry readings, supporting their proposed properties as markers of COPD. Conclusion: The N-Tidal™ device can be used to accurately diagnose COPD in near-real-time, lending support to future use in a clinical setting. Trial registration: Please see NCT03615365, NCT02814253, NCT04504838 and NCT03356288.
COPD stage detection: leveraging the auto-metric graph neural network with inspiratory and expiratory chest CT images

Xingguang Deng,Wei Li,Yingjian Yang,Shicong Wang,Nanrong Zeng,Jiaxuan Xu,Haseeb Hassan,Ziran Chen,Yang Liu,Xiaoqiang Miao,Yingwei Guo,Rongchang Chen,Yan Kang

DOI: https://doi.org/10.1007/s11517-024-03016-z

2024-02-17

Medical & Biological Engineering & Computing

Abstract:Chronic obstructive pulmonary disease (COPD) is a common lung disease that can lead to restricted airflow and respiratory problems, causing a significant health, economic, and social burden. Detecting the COPD stage can provide a timely warning for prompt intervention in COPD patients. However, existing methods based on inspiratory (IN) and expiratory (EX) chest CT images are not sufficiently accurate and efficient in COPD stage detection. The lung region images are autonomously segmented from IN and EX chest CT images to extract the lung radiomics and 3D CNN features. Furthermore, a strategy for concatenating and selecting features was employed in COPD stage detection based on radiomics and 3D CNN features. Finally, we combine all the radiomics, 3D CNN features, and factor risks (age, gender, and smoking history) to detect the COPD stage based on the Auto-Metric Graph Neural Network (AMGNN). The AMGNN with radiomics and 3D CNN features achieves the best performance at 89.7 of accuracy, 90.9 of precision, 89.5 of F1-score, and 95.8 of AUC compared to six classic machine learning (ML) classifiers. Our proposed approach demonstrates high accuracy in detecting the stage of COPD using both IN and EX chest CT images. This method can potentially establish an efficient diagnostic tool for patients with COPD. Additionally, we have identified radiomics and 3D CNN as more appropriate biomarkers than Parametric Response Mapping (PRM). Moreover, our findings indicate that expiration yields better results than inspiration in detecting the stage of COPD.

engineering, biomedical,computer science, interdisciplinary applications,mathematical & computational biology,medical informatics
The Value of Deep Learing for COPD Diagnosis and Grading

Zhang,B.,Liu,A.,Lu,X.,Yang,L.

DOI: https://doi.org/10.1183/13993003.congress-2024.pa5240

IF: 24.3

2024-11-01

European Respiratory Journal

Abstract:Background and Objectives Early diagnosis of Chronic Obstructive Pulmonary Disease (COPD) pose significant challenges. This study aims to develop a deep learning system for COPD detection algorithm and severity grading based on Computed Tomography (CT) imaging. Methods The patients with complete lung function and CT images were prospectively enrolled from the First Affiliated Hospital of Chongqing Medical University. We applied preprocessing with CT imaging though a window width of 124 and a window level of -962 to optimize feature extraction from low-attenuation areas. Patch-based sampling was employed to extract 125 patches of size 60x60x60 from lung regions with a stride of 60. These patches were input into a shared-parameter ResNet18 network for feature extraction and fusion, and fed into a fully connected layer for COPD detection or severity classification (GOLD 0-1 and GOLD 2-4 classification). The sensitivity and specificity of the predicting results were analyzed. Results The COPD detection algorithm and severity grading system was developed based on the 584 patients enrolled. In the COPD diagnosis task, a dataset of 584 images achieved an AUC of 0.927 on a test set of 40 images. For the mild (GOLD 0-1) and severe (GOLD 2-4) classification task, a dataset of 180 images attained a macro avg F1 score of 0.774 on a test set of 38 images. Conclusion Deep learning based on chest CT imaging holds enormous potential for COPD diagnosis and grading.

respiratory system
Deep CNN for COPD identification by Multi-View snapshot integration of 3D airway tree and lung field

Yanan Wu,Ran Du,Jie Feng,Shouliang Qi,Haowen Pang,Shuyue Xia,Wei Qian

DOI: https://doi.org/10.1016/j.bspc.2022.104162

IF: 5.1

2023-01-01

Biomedical Signal Processing and Control

Abstract:BackgroundChronic obstructive pulmonary disease (COPD) is a complex and irreversible respiratory disease with potential morphological abnormalities of the airway and lung fields. To date, whether and how these abnormalities can be used to identify COPD is unknown. This study developed a deep convolutional neural network (CNN) integrating the airway tree and lung field morphologies to identify COPD.MethodsWe represent 3D airway and lung fields through multi-view 2D snapshots and their integration via deep CNN, to estimate the possibility of COPD. We constructed two datasets named Dataset 1 including 380 participants (190 COPD and 190 healthy controls) for training and validation and Dataset 2 including 201 participants (101 COPD and 100 healthy controls) for testing. First, the 3D airway tree and lung field are automatically extracted from computed tomography (CT) images, and 2D snapshots in nine views are captured. Second, the proposed ResNet-26 is trained with each view of snapshots as input. Finally, majority voting of nine models is performed to identify COPD.ResultsThe accuracy (ACC) of the single-view ResNet-26 model (ventral, dorsal, and isometric view of airway; front, rear, left, right, top, and bottom view of lung field) is 0.900, 0.873, 0.889, 0.868, 0.824, 0.876, 0.861, 0.839, and 0.884, respectively. For the multi-view ResNet-26 model of airway tree and lung field, the ACC is 0.913 and 0.895, respectively. For the model integrating all nine views, the ACC eventually reaches as high as 0.947.ConclusionsThe deep CNN model identifies COPD through integrating morphology of the airway tree and lung field extracted from CT images. A different view of 2D snapshots represents various characteristics of the 3D airway tree and lung field. The integration of multiple views can improve the performance of COPD prediction. The CNN model provides a potential method of identifying COPD via CT scans.

engineering, biomedical
Function Follows Form: Regression from Complete Thoracic Computed Tomography Scans

Max Argus,Cornelia Schaefer-Prokop,David A. Lynch,Bram van Ginneken

DOI: https://doi.org/10.48550/arXiv.1909.12047

2019-09-26

Image and Video Processing

Abstract:Chronic Obstructive Pulmonary Disease (COPD) is a leading cause of morbidity and mortality. While COPD diagnosis is based on lung function tests, early stages and progression of different aspects of the disease can be visible and quantitatively assessed on computed tomography (CT) scans. Many studies have been published that quantify imaging biomarkers related to COPD. In this paper we present a convolutional neural network that directly computes visual emphysema scores and predicts the outcome of lung function tests for 195 CT scans from the COPDGene study. Contrary to previous work, the proposed method does not encode any specific prior knowledge about what to quantify, but it is trained end-to-end with a set of 1424 CT scans for which the output parameters were available. The network provided state-of-the-art results for these tasks: Visual emphysema scores are comparable to those assessed by trained human observers; COPD diagnosis from estimated lung function reaches an area under the ROC curve of 0.94, outperforming prior art. The method is easily generalizable to other situations where information from whole scans needs to be summarized in single quantities.
Deformable Dual-Path Networks for Chronic Obstructive Pulmonary Disease Staging in CT Images

Chao Min,Wenkang Fan,Zhuo Zeng,Haichao Peng,Xiangxing Chen,Xióngbiao Luó,Hao Fang

DOI: https://doi.org/10.1109/IJCNN60899.2024.10650451

2024-06-30

Abstract:Chronic obstructive pulmonary disease (COPD) is a respiratory disease that progresses over time and can significantly affect a person’s quality of life. Our proposed method for assessing the severity of COPD involves using lung computed tomography (CT) scans and a deep learning model called Deformable Dual-Path Networks. This model incorporates a side path that is densely connected to learn as many pathological features as possible. Our study provides a methodological idea for making full use of the results of vascular and airway tree segmentation in the diagnosis and monitoring of COPD patients, which can provide a reference for future researchers. We have created a network that uses chest CT scans to classify patients with COPD. Our method was tested on a dataset of 70 patients, and the results showed that it performs better than existing methods. This approach has the potential to enhance the diagnosis and monitoring of COPD patients. In summary, our method shows promise for improving the accuracy and efficiency of COPD severity assessment through medical imaging.

Computer Science,Medicine
COPD Classification in CT Images Using a 3D Convolutional Neural Network

Jalil Ahmed,Sulaiman Vesal,Felix Durlak,Rainer Kaergel,Nishant Ravikumar,Martine Remy-Jardin,Andreas Maier

DOI: https://doi.org/10.48550/arXiv.2001.01100

2020-01-04

Image and Video Processing

Abstract:Chronic obstructive pulmonary disease (COPD) is a lung disease that is not fully reversible and one of the leading causes of morbidity and mortality in the world. Early detection and diagnosis of COPD can increase the survival rate and reduce the risk of COPD progression in patients. Currently, the primary examination tool to diagnose COPD is spirometry. However, computed tomography (CT) is used for detecting symptoms and sub-type classification of COPD. Using different imaging modalities is a difficult and tedious task even for physicians and is subjective to inter-and intra-observer variations. Hence, developing meth-ods that can automatically classify COPD versus healthy patients is of great interest. In this paper, we propose a 3D deep learning approach to classify COPD and emphysema using volume-wise annotations only. We also demonstrate the impact of transfer learning on the classification of emphysema using knowledge transfer from a pre-trained COPD classification model.
Diagnosis and Severity Assessment of COPD Using a Novel Fast-Response Capnometer and Interpretable Machine Learning

Leeran Talker,Cihan Dogan,Daniel Neville,Rui Hen Lim,Henry Broomfield,Gabriel Lambert,Ahmed Selim,Thomas Brown,Laura Wiffen,Julian Carter,Helen F. Ashdown,Gail Hayward,Elango Vijaykumar,Scott T. Weiss,Anoop Chauhan,Ameera X. Patel

DOI: https://doi.org/10.1080/15412555.2024.2321379

2024-04-26

COPD Journal of Chronic Obstructive Pulmonary Disease

Abstract:Introduction Spirometry is the gold standard for COPD diagnosis and severity determination, but is technique-dependent, nonspecific, and requires administration by a trained healthcare professional. There is a need for a fast, reliable, and precise alternative diagnostic test. This study's aim was to use interpretable machine learning to diagnose COPD and assess severity using 75-second carbon dioxide (CO 2 ) breath records captured with TidalSense's N-Tidal TM capnometer.

respiratory system
Automated CT Staging of Chronic Obstructive Pulmonary Disease Severity for Predicting Disease Progression and Mortality with a Deep Learning Convolutional Neural Network.

D. Lynch,N. Yuan,D. Conrad,T. Retson,K. Hasenstab,S. Kligerman,A. Hsiao

DOI: https://doi.org/10.1148/RYCT.2021200477

2021-04-01

Radiology: Cardiothoracic Imaging

Abstract:Purpose To develop a deep learning-based algorithm to stage the severity of chronic obstructive pulmonary disease (COPD) through quantification of emphysema and air trapping on CT images and to assess the ability of the proposed stages to prognosticate 5-year progression and mortality. Materials and Methods In this retrospective study, an algorithm using co-registration and lung segmentation was developed in-house to automate quantification of emphysema and air trapping from inspiratory and expiratory CT images. The algorithm was then tested in a separate group of 8951 patients from the COPD Genetic Epidemiology study (date range, 2007-2017). With measurements of emphysema and air trapping, bivariable thresholds were determined to define CT stages of severity (mild, moderate, severe, and very severe) and were evaluated for their ability to prognosticate disease progression and mortality using logistic regression and Cox regression. Results On the basis of CT stages, the odds of disease progression were greatest among patients with very severe disease (odds ratio [OR], 2.67; 95% CI: 2.02, 3.53; P < .001) and were elevated in patients with moderate disease (OR, 1.50; 95% CI: 1.22, 1.84; P = .001). The hazard ratio of mortality for very severe disease at CT was 2.23 times the normal ratio (95% CI: 1.93, 2.58; P < .001). When combined with Global Initiative for Chronic Obstructive Lung Disease (GOLD) staging, patients with GOLD stage 2 disease had the greatest odds of disease progression when the CT stage was severe (OR, 4.48; 95% CI: 3.18, 6.31; P < .001) or very severe (OR, 4.72; 95% CI: 3.13, 7.13; P < .001). Conclusion Automated CT algorithms can facilitate staging of COPD severity, have diagnostic performance comparable with that of spirometric GOLD staging, and provide further prognostic value when used in conjunction with GOLD staging.Supplemental material is available for this article.© RSNA, 2021See also commentary by Kalra and Ebrahimian in this issue.

Computer Science,Medicine
Development and application of a deep learning-based comprehensive early diagnostic model for chronic obstructive pulmonary disease

Zecheng Zhu,Shunjin Zhao,Jiahui Li,Yuting Wang,Luopiao Xu,Yubing Jia,Zihan Li,Wenyuan Li,Gang Chen,Xifeng Wu

DOI: https://doi.org/10.1186/s12931-024-02793-3

IF: 5.8

2024-04-18

Respiratory Research

Abstract:Abstract Background Chronic obstructive pulmonary disease (COPD) is a frequently diagnosed yet treatable condition, provided it is identified early and managed effectively. This study aims to develop an advanced COPD diagnostic model by integrating deep learning and radiomics features. Methods We utilized a dataset comprising CT images from 2,983 participants, of which 2,317 participants also provided epidemiological data through questionnaires. Deep learning features were extracted using a Variational Autoencoder, and radiomics features were obtained using the PyRadiomics package. Multi-Layer Perceptrons were used to construct models based on deep learning and radiomics features independently, as well as a fusion model integrating both. Subsequently, epidemiological questionnaire data were incorporated to establish a more comprehensive model. The diagnostic performance of standalone models, the fusion model and the comprehensive model was evaluated and compared using metrics including accuracy, precision, recall, F1-score, Brier score, receiver operating characteristic curves, and area under the curve (AUC). Results The fusion model exhibited outstanding performance with an AUC of 0.952, surpassing the standalone models based solely on deep learning features (AUC = 0.844) or radiomics features (AUC = 0.944). Notably, the comprehensive model, incorporating deep learning features, radiomics features, and questionnaire variables demonstrated the highest diagnostic performance among all models, yielding an AUC of 0.971. Conclusion We developed and implemented a data fusion strategy to construct a state-of-the-art COPD diagnostic model integrating deep learning features, radiomics features, and questionnaire variables. Our data fusion strategy proved effective, and the model can be easily deployed in clinical settings. Trial registration Not applicable. This study is NOT a clinical trial, it does not report the results of a health care intervention on human participants.

respiratory system
AI-based diagnosis of chronic obstructive pulmonary disease from low-dose CT images

Chayanon Pamarapa,Salisa Kemlek,Wichasa Sukumwattana,Pharinda Sitthikul,Sichon Khuanrubsuan,Akkarawat Chaikhampa,Paritt Wongtrakool,Ammarut Chuajak,Monchai Phonlakrai,Ruedeerat Keerativittayayut,,,,,,,,,,

DOI: https://doi.org/10.12982/jams.2024.037

2024-05-04

Journal of Associated Medical Sciences

Abstract:Background: Chronic obstructive pulmonary disease (COPD) is a group of diseases characterized by airflow blockage. It is one of the leading causes of global mortality and is primarily attributed to smoking. COPD patients are usually diagnosed by spirometry test. Although regarded as the gold standard for COPD diagnosis, the spirometry test carries contraindications, thus prompting the development of low-dose computed tomography (low-dose CT) scan as an alternative for COPD screening. However, a practical limitation of diagnosing COPD from CT images is its reliance on the expertise of a skilled radiologist. Objective: To address this limitation, we aimed to develop a deep-learning model for the automated classification of COPD and non-COPD from low-dose CT images. Materials and methods: We examined the potential of a convolutional neural network for identifying COPD. Our dataset consisted of 10,000 low-dose CT images obtained from a lung cancer screening program, involving both ex-smokers and current smokers deemed at high risk of lung cancer. Spirometry data served as the ground truth for defining COPD. We used 90% of the datasets for training and 10% for testing. Results: Our developed model achieved notable performance metrics: an area under the receiver operating characteristic curve (AUC) of 0.97, an accuracy of 0.89, a precision of 0.85, a recall of 0.96, and an F1-score of 0.90. Conclusion: Our study demonstrates the potential of deep learning models to augment clinical assessments and improve the diagnosis of COPD, thereby enhancing diagnostic accuracy and efficiency. The findings suggest the feasibility of integrating this technology into routine lung cancer screening programs for COPD detection.
Early Diagnosis of Chronic Obstructive Pulmonary Disease from Chest X-Rays using Transfer Learning and Fusion Strategies

Ryan Wang,Li-Ching Chen,Lama Moukheiber,Mira Moukheiber,Dana Moukheiber,Zach Zaiman,Sulaiman Moukheiber,Tess Litchman,Kenneth Seastedt,Hari Trivedi,Rebecca Steinberg,Po-Chih Kuo,Judy Gichoya,Leo Anthony Celi

DOI: https://doi.org/10.48550/arXiv.2211.06925

2022-11-13

Computer Vision and Pattern Recognition

Abstract:Chronic obstructive pulmonary disease (COPD) is one of the most common chronic illnesses in the world and the third leading cause of mortality worldwide. It is often underdiagnosed or not diagnosed until later in the disease course. Spirometry tests are the gold standard for diagnosing COPD but can be difficult to obtain, especially in resource-poor countries. Chest X-rays (CXRs), however, are readily available and may serve as a screening tool to identify patients with COPD who should undergo further testing. Currently, no research applies deep learning (DL) algorithms that use large multi-site and multi-modal data to detect COPD patients and evaluate fairness across demographic groups. We use three CXR datasets in our study, CheXpert to pre-train models, MIMIC-CXR to develop, and Emory-CXR to validate our models. The CXRs from patients in the early stage of COPD and not on mechanical ventilation are selected for model training and validation. We visualize the Grad-CAM heatmaps of the true positive cases on the base model for both MIMIC-CXR and Emory-CXR test datasets. We further propose two fusion schemes, (1) model-level fusion, including bagging and stacking methods using MIMIC-CXR, and (2) data-level fusion, including multi-site data using MIMIC-CXR and Emory-CXR, and multi-modal using MIMIC-CXRs and MIMIC-IV EHR, to improve the overall model performance. Fairness analysis is performed to evaluate if the fusion schemes have a discrepancy in the performance among different demographic groups. The results demonstrate that DL models can detect COPD using CXRs, which can facilitate early screening, especially in low-resource regions where CXRs are more accessible than spirometry. The multi-site data fusion scheme could improve the model generalizability on the Emory-CXR test data. Further studies on using CXR or other modalities to predict COPD ought to be in future work.
Multi-modal data combination strategy based on chest HRCT images and PFT parameters for intelligent dyspnea identification in COPD

Yingjian Yang,Ziran Chen,Wei Li,Nanrong Zeng,Yingwei Guo,Shicong Wang,Wenxin Duan,Yang Liu,Huai Chen,Xian Li,Rongchang Chen,Yan Kang

DOI: https://doi.org/10.3389/fmed.2022.980950

IF: 3.9

2022-12-21

Frontiers in Medicine

Abstract:Introduction Because of persistent airflow limitation in chronic obstructive pulmonary disease (COPD), patients with COPD often have complications of dyspnea. However, as a leading symptom of COPD, dyspnea in COPD deserves special consideration regarding treatment in this fragile population for pre-clinical health management in COPD. Methods: Based on the above, this paper proposes a multi-modal data combination strategy by combining the local and global features for dyspnea identification in COPD based on the multi-layer perceptron (MLP) classifier. Methods First, lung region images are automatically segmented from chest HRCT images for extracting the original 1,316 lung radiomics (OLR, 1,316) and 13,824 3D CNN features (O3C, 13,824). Second, the local features, including five selected pulmonary function test (PFT) parameters (SLF, 5), 28 selected lung radiomics (SLR, 28), and 22 selected 3D CNN features (S3C, 22), are respectively selected from the original 11 PFT parameters (OLF, 11), 1,316 OLR, and 13,824 O3C by the least absolute shrinkage and selection operator (Lasso) algorithm. Meantime, the global features, including two fused PFT parameters (FLF, 2), six fused lung radiomics (FLR, 6), and 34 fused 3D CNN features (F3C, 34), are respectively fused by 11 OLF, 1,316 OLR, and 13,824 O3C using the principal component analysis (PCA) algorithm. Finally, we combine all the local and global features (SLF + FLF + SLR + FLR + S3C + F3C, 5+ 2 + 28 + 6 + 22 + 34) for dyspnea identification in COPD based on the MLP classifier. Results Our proposed method comprehensively improves classification performance. The MLP classifier with all the local and global features achieves the best classification performance at 87.7% of accuracy, 87.7% of precision, 87.7% of recall, 87.7% of F1-scorel, and 89.3% of AUC, respectively. Discussion Compared with single-modal data, the proposed strategy effectively improves the classification performance for dyspnea identification in COPD, providing an objective and effective tool for COPD management.

medicine, general & internal
Detection and staging of chronic obstructive pulmonary disease using a computed tomography–based weakly supervised deep learning approach

Jiaxing Sun,Ximing Liao,Yusheng Yan,Xin Zhang,Jian Sun,Weixiong Tan,Baiyun Liu,Jiangfen Wu,Qian Guo,Shaoyong Gao,Zhang Li,Kun Wang,Qiang Li

DOI: https://doi.org/10.1007/s00330-022-08632-7

IF: 7.034

2022-02-24

European Radiology

Abstract:ObjectivesChronic obstructive pulmonary disease (COPD) is underdiagnosed globally. The present study aimed to develop weakly supervised deep learning (DL) models that utilize computed tomography (CT) image data for the automated detection and staging of spirometry-defined COPD.MethodsA large, highly heterogeneous dataset was established, consisting of 1393 participants retrospectively recruited from outpatient, inpatient, and physical examination center settings of four large public hospitals in China. All participants underwent both inspiratory chest CT scans and pulmonary function tests. CT images, spirometry data, demographic information, and clinical information of each participant were collected. An attention-based multi-instance learning (MIL) model for COPD detection was trained using CT scans from 837 participants. External validation of the COPD detection was performed with 620 low-dose CT (LDCT) scans acquired from the National Lung Screening Trial (NLST) cohort. A multi-channel 3D residual network was further developed to categorize GOLD stages among confirmed COPD patients.ResultsThe attention-based MIL model used for COPD detection achieved an area under the receiver operating characteristic curve (AUC) of 0.934 (95% CI: 0.903, 0.961) on the internal test set and 0.866 (95% CI: 0.805, 0.928) on the LDCT subset acquired from the NLST. The multi-channel 3D residual network was able to correctly grade 76.4% of COPD patients in the test set (423/553) using the GOLD scale.ConclusionsThe proposed chest CT-DL approach can automatically identify spirometry-defined COPD and categorize patients according to the GOLD scale. As such, this approach may be an effective case-finding tool for COPD diagnosis and staging.Key Points• Chronic obstructive pulmonary disease is underdiagnosed globally, particularly in developing countries.• The proposed chest computed tomography (CT)–based deep learning (DL) approaches could accurately identify spirometry-defined COPD and categorize patients according to the GOLD scale.• The chest CT-DL approach may be an alternative case-finding tool for COPD identification and evaluation.

radiology, nuclear medicine & medical imaging
A noval pulmonary function evaluation method based on ResNet50 + SVR model and cough

Wenlong Xu,Guoqiang He,Dan Shen,Bingqiao Xu,Peirong Jiang,Feng Liu,Xiaomin Lou,Lingling Guo,Li Ma

DOI: https://doi.org/10.1038/s41598-023-49334-4

IF: 4.6

2023-12-13

Scientific Reports

Abstract:Traditionally, the clinical evaluation of respiratory diseases was pulmonary function testing, which can be used for the detection of severity and prognosis through pulmonary function parameters. However, this method is limited by the complex process, which is impossible for patients to monitor daily. In order to evaluate pulmonary function parameters conveniently with less time and location restrictions, cough sound is the substitute parameter. In this paper, 371 cough sounds segments from 150 individuals were separated into 309 and 62 as the training and test samples. Short-time Fourier transform (STFT) was applied to transform cough sound into spectrogram, and ResNet50 model was used to extract 2048-dimensional features. Through support vector regression (SVR) model with biological attributes, the data were regressed with pulmonary function parameters, FEV1, FEV1%, FEV1/FVC, FVC, FVC%, and the performance of this models was evaluated with fivefold cross-validation. Combines with deep learning and machine learning technologies, the better results in the case of small samples were achieved. Using the coefficient of determination (R 2 ), the ResNet50 + SVR model shows best performance in five basic pulmonary function parameters evaluation as FEV1(0.94), FEV1%(0.84), FEV1/FVC(0.68), FVC(0.92), and FVC%(0.72). This ResNet50 + SVR hybrid model shows excellent evaluation of pulmonary function parameters during coughing, making it possible to realize a simple and rapid evaluation for pneumonia patients. The technology implemented in this paper is beneficial in judge the patient's condition, realize early screening of respiratory diseases, evaluate postoperative disease changes and detect respiratory infectious diseases without time and location restrictions.

multidisciplinary sciences
A 3D-CNN model with CT-based parametric response mapping for classifying COPD subjects

Thao Thi Ho,Taewoo Kim,Woo Jin Kim,Chang Hyun Lee,Kum Ju Chae,So Hyeon Bak,Sung Ok Kwon,Gong Yong Jin,Eun-Kee Park,Sanghun Choi

DOI: https://doi.org/10.1038/s41598-020-79336-5

IF: 4.6

2021-01-08

Scientific Reports

Abstract:Abstract Chronic obstructive pulmonary disease (COPD) is a respiratory disorder involving abnormalities of lung parenchymal morphology with different severities. COPD is assessed by pulmonary-function tests and computed tomography-based approaches. We introduce a new classification method for COPD grouping based on deep learning and a parametric-response mapping (PRM) method. We extracted parenchymal functional variables of functional small airway disease percentage (fSAD%) and emphysema percentage (Emph%) with an image registration technique, being provided as input parameters of 3D convolutional neural network (CNN). The integrated 3D-CNN and PRM (3D-cPRM) achieved a classification accuracy of 89.3% and a sensitivity of 88.3% in five-fold cross-validation. The prediction accuracy of the proposed 3D-cPRM exceeded those of the 2D model and traditional 3D CNNs with the same neural network, and was comparable to that of 2D pretrained PRM models. We then applied a gradient-weighted class activation mapping (Grad-CAM) that highlights the key features in the CNN learning process. Most of the class-discriminative regions appeared in the upper and middle lobes of the lung, consistent with the regions of elevated fSAD% and Emph% in COPD subjects. The 3D-cPRM successfully represented the parenchymal abnormalities in COPD and matched the CT-based diagnosis of COPD.

multidisciplinary sciences
Enabling chronic obstructive pulmonary disease diagnosis through chest X-rays: A multi-site and multi-modality study

Ryan Wang,Li-Ching Chen,Lama Moukheiber,Kenneth P Seastedt,Mira Moukheiber,Dana Moukheiber,Zachary Zaiman,Sulaiman Moukheiber,Tess Litchman,Hari Trivedi,Rebecca Steinberg,Judy W Gichoya,Po-Chih Kuo,Leo A Celi

DOI: https://doi.org/10.1016/j.ijmedinf.2023.105211

Abstract:Purpose: Chronic obstructive pulmonary disease (COPD) is one of the most common chronic illnesses in the world. Unfortunately, COPD is often difficult to diagnose early when interventions can alter the disease course, and it is underdiagnosed or only diagnosed too late for effective treatment. Currently, spirometry is the gold standard for diagnosing COPD but it can be challenging to obtain, especially in resource-poor countries. Chest X-rays (CXRs), however, are readily available and may have the potential as a screening tool to identify patients with COPD who should undergo further testing or intervention. In this study, we used three CXR datasets alongside their respective electronic health records (EHR) to develop and externally validate our models. Method: To leverage the performance of convolutional neural network models, we proposed two fusion schemes: (1) model-level fusion, using Bootstrap aggregating to aggregate predictions from two models, (2) data-level fusion, using CXR image data from different institutions or multi-modal data, CXR image data, and EHR data for model training. Fairness analysis was then performed to evaluate the models across different demographic groups. Results: Our results demonstrate that DL models can detect COPD using CXRs with an area under the curve of over 0.75, which could facilitate patient screening for COPD, especially in low-resource regions where CXRs are more accessible than spirometry. Conclusions: By using a ubiquitous test, future research could build on this work to detect COPD in patients early who would not otherwise have been diagnosed or treated, altering the course of this highly morbid disease.
A comparative analysis of chronic obstructive pulmonary disease using machine learning, and deep learning

Ramadoss Ramalingam,Vimala Chinnaiyan

DOI: https://doi.org/10.11591/ijece.v13i1.pp389-399

2023-02-01

International Journal of Electrical and Computer Engineering (IJECE)

Abstract:Chronic obstructive pulmonary disease (COPD) is a general clinical issue in numerous countries considered the fifth reason for inability and the third reason for mortality on a global scale within 2021. From recent reviews, a deep convolutional neural network (CNN) is used in the primary analysis of the deadly COPD, which uses the computed tomography (CT) images procured from the deep learning tools. Detection and analysis of COPD using several image processing techniques, deep learning models, and machine learning models are notable contributions to this review. This research aims to cover the detailed findings on pulmonary diseases or lung diseases, their causes, and symptoms, which will help treat infections with high performance and a swift response. The articles selected have more than 80% accuracy and are tabulated and analyzed for sensitivity, specificity, and area under the curve (AUC) using different methodologies. This research focuses on the various tools and techniques used in COPD analysis and eventually provides an overview of COPD with coronavirus disease 2019 (COVID-19) symptoms.
Fx-Net and PureNet: Convolutional Neural Network architecture for discrimination of Chronic Obstructive Pulmonary Disease from smokers and healthy subjects through electronic nose signals

Cries Avian,Muhammad Izzuddin Mahali,Nur Achmad Sulistyo Putro,Setya Widyawan Prakosa,Jenq-Shiou Leu

DOI: https://doi.org/10.1016/j.compbiomed.2022.105913

Abstract:As one of the most reliable and significant indicators, Chronic Obstructive Pulmonary Disease (COPD) becomes a robust predictor of lung cancer early detection, the world's leading cause of cancer death. One of the methods is to analyze the Volatile Organic Compounds (VOCs) in exhaled breath using electronic noses (E-noses), which have become emerging tools for analyzing breath because of their potential and promising technology for diagnosing. However, the signal processing of the E-Nose sensor becomes vital in exposing information about the subject condition, which most researchers strive to accomplish. We proposed a Convolutional Neural Network (CNN) architecture to classify COPD in smokers and non-smokers, healthy subjects, and smokers from E-Nose signals to contribute to this field. Two models were constructed following E-Nose signal processing state-of-the-arts. One was by combined feature extraction and classifier, and the second was by CNN, which directly processed the raw signal. In addition, various feature extraction and classifier (Machine Learning and CNN) used in prior research were investigated. Using 3K and 5K Fold cross-validation results demonstrated that our proposed models outperformed in Kernel Principal Component Analysis (KPCA) with Fx-ConvNet and Pure-ConvNet. They all reached maximum F1-Score with zero standard deviation values indicating a consistent result. Further experiments also showed that KPCA contributed to the increasing performance of some classifiers with average F1-Score 0.933 and 0.068 as standard deviation values.
Deep Learning Assisted Diagnosis of Chronic Obstructive Pulmonary Disease Based on a Local-to-Global Framework

Nian Cai,Yiying Xie,Zijie Cai,Yuchen Liang,Yinghong Zhou,Ping Wang

DOI: https://doi.org/10.3390/electronics13224443

IF: 2.9

2024-11-16

Electronics

Abstract:To aid the diagnosis of chronic obstructive pulmonary disease (COPD), a local-to-global deep framework with group attentions and slice-aware loss is designed in this paper, which utilizes the chest CT sequences of the patients as the network input. To fully mine the medical hints submerged in the CT slices, two types of group attentions are designed to extract local–global features of the grouped slices. Specifically, in each group, a group local attention block (GLAB) and a group global attention block (GGAB) are designed to extract local features in the CT slices and long-range dependencies among the grouped slices. To alleviate the influence of different numbers of CT slices in the chest CT sequences for different patients, a slice-aware loss is proposed by incorporating a normalized coefficient into the cross-entropy loss. Experimental results indicate that the designed deep model performs a good COPD identification on a real COPD dataset with 96.08% accuracy, 94.12% sensitivity, 97.06% specificity, and 95.32% AUC, which is superior to some existing deep learning methods.

engineering, electrical & electronic,computer science, information systems,physics, applied

Inference about a nonstationary process.

Machine diagnosis of chronic obstructive pulmonary disease using a novel fast-response capnometer

COPD stage detection: leveraging the auto-metric graph neural network with inspiratory and expiratory chest CT images

The Value of Deep Learing for COPD Diagnosis and Grading

Deep CNN for COPD identification by Multi-View snapshot integration of 3D airway tree and lung field

Function Follows Form: Regression from Complete Thoracic Computed Tomography Scans

Deformable Dual-Path Networks for Chronic Obstructive Pulmonary Disease Staging in CT Images

COPD Classification in CT Images Using a 3D Convolutional Neural Network

Diagnosis and Severity Assessment of COPD Using a Novel Fast-Response Capnometer and Interpretable Machine Learning

Automated CT Staging of Chronic Obstructive Pulmonary Disease Severity for Predicting Disease Progression and Mortality with a Deep Learning Convolutional Neural Network.

Development and application of a deep learning-based comprehensive early diagnostic model for chronic obstructive pulmonary disease

AI-based diagnosis of chronic obstructive pulmonary disease from low-dose CT images

Early Diagnosis of Chronic Obstructive Pulmonary Disease from Chest X-Rays using Transfer Learning and Fusion Strategies

Multi-modal data combination strategy based on chest HRCT images and PFT parameters for intelligent dyspnea identification in COPD

Detection and staging of chronic obstructive pulmonary disease using a computed tomography–based weakly supervised deep learning approach

A noval pulmonary function evaluation method based on ResNet50 + SVR model and cough

A 3D-CNN model with CT-based parametric response mapping for classifying COPD subjects

Enabling chronic obstructive pulmonary disease diagnosis through chest X-rays: A multi-site and multi-modality study

A comparative analysis of chronic obstructive pulmonary disease using machine learning, and deep learning

Fx-Net and PureNet: Convolutional Neural Network architecture for discrimination of Chronic Obstructive Pulmonary Disease from smokers and healthy subjects through electronic nose signals

Deep Learning Assisted Diagnosis of Chronic Obstructive Pulmonary Disease Based on a Local-to-Global Framework