Abstract:Increasing demand for electrochemical energy storage devices with high energy density, high power density, and long lifespan has posed significant challenges for developing suitable electrodes and electrolyte systems with fast charge transport kinetics and superior cycling stability. 1 As one of the promising electrode materials explored recently, MXenes (M n+1 X n T x ) are a group of two-dimensional transition metal carbides and/or nitrides, in which M is early transition metal, X presents C and/or N, T x stands for the surface groups such as =O, -OH, -Cl or -F. They exhibit excellent high-rate performance in electrochemical energy storage applications due to their unique properties: superior electronic conductivity (~15 000 S cm -1 ) and large interlayer spacing (~1 nm). 2 The charge storage mechanism and performance of the MXenes electrode is highly dependent on the electrode and electrolyte composition. For example, Ti 3 C 2 T x has shown rapid pseudocapacitive (de)intercalation of protons and transformation between the oxygen surface groups (=O) and hydroxyl (-OH) groups in acidic aqueous electrolytes. 3,4 As a result, Ti 3 C 2 T x exhibits an ultrahigh volumetric capacitance of 1500 F cm -3 in H 2 SO 4 electrolyte. 5 In less corrosive neutral aqueous electrolytes, the cation intercalation is accompanied by negligible charge transfer, leading to ultrafast charge storage. 6 Consequently, a moderate capacitance with superior cycling stability is reported in neutral electrolytes compared to acidic electrolytes. In contrast to dilute aqueous electrolyte, which has a limited electrochemical stability window (ESW), the highly concentrated water-in-salt (WIS) electrolyte possesses a large ESW (∼3.0 V) owing to the depressed activity of free water. Besides, the unique solvation structure of WIS electrolyte induces a novel intercalation of fully-solvated Li + at positive potential and increases the capacitance of MXene. 7 As a result, WIS electrolyte helps overcome the drawback of the low energy density of MXene in neutral aqueous electrolytes. In our research, we explored the impact of MXene structure and a novel electrolyte system on the pseudocapacitive performance of MXene. The charge storage behavior of Ti 3 C 2 T x in a molecular crowding electrolyte was explored. Interestingly, Ti 3 C 2 T x displayed one pair of redox peaks with low polarization, differing from both dilute neutral aqueous electrolyte and WIS electrolyte, which may be attributed to the intercalation of Polyethylene glycol (PEG)-solvated Li + cluster. The in situ X-ray diffraction are employed to better understand the charge storage process. We also constructed a MXene/polymer heterostructure with enlarged interlayer spacing. The unique heterostructure delivered a significantly enhanced rate performance in neutral aqueous electrolyte. (a high capacitance retention of 81% at 10 A g -1 ) Reference: Simon, P. & Gogotsi, Y. Nature Materials 7 , 845–854 (2008). Anasori, B. et al. Nature Reviews Materials 2 , 16098 (2017). Mu, X. et al . Advanced Functional Materials 29 , 1902953 (2019). Zhan, C. et al. J. Phys. Chem. Lett. 9 , 1223–1228 (2018). Lukatskaya, M. R. et al. Nat Energy 2 , 1–6 (2017). Ando, Y. et al. Advanced Functional Materials 30 , 2000820 (2020). Wang, X. et al . ACS Nano 15 , 15274–15284 (2021).

Unlocking Ultrahigh Initial Coulombic Efficiency of MXene Anode via Presodiation and Electrolyte Optimization

Atomic Sulfur Covalently Engineered Interlayers of Ti3C2 MXene for Ultra‐Fast Sodium‐Ion Storage by Enhanced Pseudocapacitance

Deep etching assisted hollow-carbon-skeleton structured porous Co 0.85 Se nanocubes anchored on MXene nanosheets for superior sodium storage toward ultrahigh initial Coulombic efficiency

Molten Salts Etching Route Driven Universal Construction of MXene/Transition Metal Sulfides Heterostructures with Interfacial Electronic Coupling for Superior Sodium Storage

Tailoring Interlayer Structure and Surface Chemical State Intensifies Redox Reaction Activity of Ti3c2tx Mxene

Heteroatoms preintercalated Cl-terminated Ti3C2Tx MXene wrapped with Mesoporous Fe2O3 Nanospheres for improved Sodium ion Storage

A simple, efficient, fluorine‐free synthesis method of MXene/Ti3C2Tx anode through molten salt etching for sodium‐ion batteries

Eutectic Etching toward In‐Plane Porosity Manipulation of Cl‐Terminated MXene for High‐Performance Dual‐Ion Battery Anode

Optimized Co–S Bonds Energy and Confinement Effect of Hollow MXene@CoS2/NC for Enhanced Sodium Storage Kinetics and Stability

Intensifying Electrochemical Activity of Ti3C2Tx MXene via Customized Interlayer Structure and Surface Chemistry

Nitrogen-doped carbon decorated TiO2/Ti3C2T MXene composites as anode material for high-performance sodium-ion batteries

3D Sodiophilic Ti3C2 MXene@g-C3N4 Hetero-Interphase Raises the Stability of Sodium Metal Anodes

Intercalation Pseudocapacitance in 2D VS2/Ti3C2Tx MXene Hybrids for All‐Climate and Long‐Cycle Sodium‐Ion Batteries

Tunable Pseudocapacitance Storage of MXene by Cation Pillaring for High Performance Sodium-Ion Capacitors

Energy storage mechanism of MXene-Based sodium/potassium titanate for high performance elecrtrode

High-Rate Electrochemical Energy Storage of MXene in Neutral Aqueous Electrolytes

Interconnected Metallic Membrane Enabled by MXene Inks Toward High‐Rate Anode and High‐Voltage Cathode for Li‐Ion Batteries

Few-layered Ti3C2 MXene anchoring bimetallic selenide NiCo2Se4 nanoparticles for superior Sodium-ion batteries

Few-layered Ti<sub>3</sub>C<sub>2</sub> MXene anchoring bimetallic selenide NiCo<sub>2</sub>Se<sub>4</sub> nanoparticles for superior Sodium-ion batteries

Optimized Co–S bonds energy and confinement effect of hollow MXene@CoS 2 /NC for enhanced sodium storage kinetics and stability

Achieving High‐Performance 3D K+‐Pre‐intercalated Ti3C2Tx MXene for Potassium‐Ion Hybrid Capacitors Via Regulating Electrolyte Solvation Structure