Abstract:High shear wet granulation (HSWG) is widely used in tablet manufacturing mainly because of its advantages in improving flowability, powder handling, process run time, size distribution, and preventing segregation. In line process analytical technology measurements are essential in capturing detailed particle dynamics and presenting real-time data to uncover the complexity of the HSWG process and ultimately for process control. This study presents an opportunity to predict the properties of the granules and tablets through torque measurement of the granulation bowl and the force exerted on a novel force probe within the powder bed. Inline force measurements are found to be more sensitive than torque measurements to the granulation process. The characteristic force profiles present the overall fingerprint of the high shear wet granulation, in which the evolution of the granule formation can improve our understanding of the granulation process. This provides rich information relating to the properties of the granules, identification of the even distribution of the binder liquid, and potential granulation end point. Data were obtained from an experimental high shear mixer across a range of key process parameters using a face-centred surface response design of experiment (DoE). A closed-form analytical model was developed from the DOE matrix using the discovery of evolutionary equations. The model is able to provide a strong predictive indication of the expected tablet tensile strength based only on the data in-line. The use of a closed form mathematical equation carries notable advantages over other AI methodologies such as artificial neural networks, notably improved interpretability/interrogability, and minimal inference costs, thus allowing the model to be used for real-time decision making and process control. The capability of accurately predicting, in real time, the required compaction force required to achieve the desired tablet tensile strength from upstream data carries the potential to ensure compression machine settings rapidly reach and are maintained at optimal values, thus maximising efficiency and minimising waste.

Tablet ejection: A systematic comparison between force, static friction, and kinetic friction

Modeling of adhesion in tablet compression--I. Atomic force microscopy and molecular simulation

Experimental Analysis of Tablet Properties for Discrete Element Modeling of an Active Coating Process

Dependence of Tablet Brittleness on Tensile Strength and Porosity.

Advancing tablet lubrication: A systematic comparison of feed frame lubrication and internal lubrication

Evaluation of the Ejection Pressure for Tracking Internal Cracks during Compaction in Bilayer Tablet Formulations Using Experimental and Finite Element Methods

Mechanism of Inter-Tablet Coating Variability: Investigation about the Motion Behavior of Ellipsoidal Tablets in a Pan Coater

Investigation on the Friction Mechanism and Its Relation to the Force Chains During Powder Compaction

Tableting model assessment of porosity and tensile strength using a continuous wet granulation route

A modified Kushner-Moore approach to characterising small-scale blender performance impact on tablet compaction

Predicting tablet properties using In-Line measurements and evolutionary equation Discovery: A high shear wet granulation study

DEM-DDM Investigation of the Tablet Coating Process Using Different Particle Shape Models

The effect of excipient particle size on the reduction of compactibility after roller compaction

Relation Between Force Chain Quantitative Characteristics and Side Wall Friction Behaviour During Ferrous Powder Compaction

In-line monitoring of compaction properties on a rotary tablet press during tablet manufacturing of hot-melt extruded amorphous solid dispersions

The importance of a velocity-dependent friction coefficient in representing the flow behaviour of a blade-driven powder bed

Review and comparison of empirical friction coefficient formulation for multibody dynamics of lubricated slotted joints

Beyond Brittle/Ductile Classification: Applying Proper Constitutive Mechanical Metrics to Understand the Compression Characteristics of Pharmaceutical Materials

Simulation and Evaluation of Tablet-Coating Burst Based on Finite Element Method.

Selection of lubricant type and concentration for orodispersible tablets

The Effect of Microcrystalline Cellulose–CaHPO4 Mixtures in Different Volume Ratios on the Compaction and Structural–Mechanical Properties of Tablets