Bioavailability od digoxin.

E. Fraser,R. H. Leach,J. Poston

IF: 202.731

The Lancet

Abstract:

What problem does this paper attempt to address?

Validity and reliability evidence support task-specific metrics for laparoscopic fundoplication

Alexis Desir,Carolina Marques,Emile Farah,Shruti R. Hegde,Carla Holcomb,Daniel J. Scott,Ganesh Sankaranarayanan

DOI: https://doi.org/10.1007/s00464-024-10675-4

2024-02-21

Surgical Endoscopy

Abstract:BackgroundLaparoscopic hiatal hernia repair (LHHR) is a complex operation requiring advanced surgical training. Surgical simulation offers a potential solution for learning complex operations without the need for high surgical volume. Our goal is to develop a virtual reality (VR) simulator for LHHR; however, data supporting task-specific metrics for this procedure are lacking. The purpose of this study was to develop and assess validity and reliability evidence of task-specific metrics for the fundoplication phase of LHHR.MethodsIn phase I, structured interviews with expert foregut surgeons were conducted to develop task-specific metrics (TSM). In phase II, participants with varying levels of surgical expertise performed a laparoscopic Nissen fundoplication procedure on a porcine stomach explant. Video recordings were independently assessed by two blinded graders using global and TSM. An intraclass correlation coefficient (ICC) was used to assess interrater reliability (IRR). Performance scores were compared using a Kruskal–Wallis test. Spearman’s rank correlation was used to evaluate the association between global and TSM.ResultsPhase I of the study consisted of 12 interviews with expert foregut surgeons. Phase II engaged 31 surgery residents, a fellow, and 6 attendings in the simulation. Phase II results showed high IRR for both global (ICC = 0.84, p < 0.001) and TSM (ICC = 0.75, p < 0.001). Significant between-group differences were detected for both global (χ2 = 24.01, p < 0.001) and TSM (χ2 = 18.4, p < 0.001). Post hoc analysis showed significant differences in performance between the three groups for both metrics (p < 0.05). There was a strong positive correlation between the global and TSM (rs = 0.86, p < 0.001).ConclusionWe developed task-specific metrics for LHHR and using a fundoplication model, we documented significant reliability and validity evidence. We anticipate that these LHHR task-specific metrics will be useful in our planned VR simulator.

surgery
Validation of a virtual intracorporeal suturing simulator

Yaoyu Fu,Lora Cavuoto,Di Qi,Karthikeyan Panneerselvam,Gene Yang,Venkata Sreekanth Artikala,Andinet Enquobahrie,Suvranu De,Steven D Schwaitzberg

DOI: https://doi.org/10.1007/s00464-018-6531-3

Abstract:Background: Intracorporeal suturing is one of the most important and difficult procedures in laparoscopic surgery. Practicing on a FLS trainer box is effective but requires large number of consumables, and the scoring is somewhat subjective and not immediate. A virtualbasic laparoscopic skill trainer (VBLaST©) was developed to simulate the five tasks of the FLS Trainer Box. The purpose of this study is to evaluate the face and content validity of the VBLaST suturing simulator (VBLaST-SS©). Methods: Twenty-five medical students and residents completed an evaluation of the simulator. The participants were asked to perform the standard intracorporeal suturing task on both VBLaST-SS© and the traditional FLS box trainer. The performance scores on each system were calculated based on time (s), deviations to the black dots (mm), and incision gap (mm). The participants were then asked to finish a 13-item questionnaire with ratings from 1 (not realistic/useful) to 5 (very realistic/useful) regarding the face validity of the simulator. A Wilcoxon signed rank test was performed to identify differences in performance on the VBLaST-SS© compared to that of the traditional FLS box trainer. Results: Three questions from the face validity questionnaire were excluded due to lack of response. Ratings to 8 of the remaining 10 questions (80%) averaged above 3.0 out of 5. Average intracorporeal suturing completion time on the VBLaST-SS© was 421 (SD = 168 s) seconds compared to 406 (175 s) seconds on the box trainer (p = 0.620). There was a significant difference between systems for the incision gap (p = 0.048). Deviation in needle insertion from the black dot was smaller for the box trainer than the virtual simulator (1.68 vs. 7.12, p < 0.001). Conclusion: Participants showed comparable performance on the VBLaST-SS© and traditional box trainer. Overall, the VBLaST-SS© system showed face validity and has the potential to support training for the suturing skills.
Board #322 - Technology Innovation Development and Preliminary Validation of a Novel Ventriculostomy Simulator (Submission #8635)

Deborah Rooney,Peng-Siang Liao,Oren Sagher,Luis Savastano,Albert Shih,Francesca Stephenson,Bruce Tai

DOI: https://doi.org/10.1097/01.sih.0000459423.93549.f4

2014-12-01

Abstract:Introduction A team of biomedical engineers, neurosurgeons, and a medical educator, created and evaluated preliminary validity evidence of a high-fidelity simulator used to train ventriculostomy skills. Description A scale reproduction of an adult skull and relevant anatomy was created. Twelve neurosurgery residents, one fellow, and five attendings (n=17) from three academic medical centers performed the simulated creation of a ventricolostomy. Participants rated the simulator using a 37-item survey across five domains. Quality of the simulator was scored from “Not at all realistic” (1) to “Highly realistic” (4). Self-reported ability to perform relevant tasks was rated from “Too difficult to perform (0) to “Too easy to perform” (4). Validity evidence relevant to test content was evaluated using a Rasch model, while evidence relevant to internal structure (inter-item reliability, and inter-rater agreement) was evaluated using traditional methods. Conclusion Analyses indicated attendings had statistically higher ratings (M=3.4/4.0) than fellows (M=3.3), and residents (M=3.0), p=.02. Domain means were 3.9 (Value), 3.5 (Physical attributes), 3.4 (Realism of experience), 3.3 (Relevance), and 2.9 (Ability). Inter-item consistency across domains were estimated to be moderate-high (.65, .92), and inter-rater agreement regarding simulator characteristics was high [ICC(2,k)= .90]. Rating differences were found across institutions, p=.001, and are reviewed. The observed global rating (2.5) indicated the simulator can be considered for teaching ventriculostomies, but could be improved slightly. Ratings indicated the simulator was valuable as a learning tool, but could be improved with minor modifications. The most commonly-suggested improvement was the addition of ears as an added anatomical landmark. References 1. Haji FA, Dubrowski A, Drake J, de Ribaupierre S. Needs assessment for simulation training in neuroendoscopy: a Canadian national survey. J Neurosurg. 2013 Feb;118(2):250-7. doi: 10.3171/2012.10.JNS12767. Epub 2012 Dec 7 2. Schirmer CM, Elder JB, Roitberg B, Lobel DA. Virtual reality-based simulation training for ventriculostomy: an evidence-based approach. Neurosurgery. 2013 Oct;73 Suppl 1:66-73. doi: 10.1227/NEU.0000000000000074. 3. Choudhury N, Gélinas-Phaneuf N, Delorme S, Del Maestro R. Fundamentals of neurosurgery: virtual reality tasks for training and evaluation of technical skills. World Neurosurg. 2013 Nov;80(5):e9-19. doi: 10.1016/j.wneu.2012.08.022. Epub 2012 Nov 23. 4. Korndorffer JR Jr, Kasten SJ, Downing SM. A call for the utilization of consensus standards in the surgical education literature. Am J Surg. 2010 Jan;199(1):99-104. doi: 10.1016/j.amjsurg.2009.08.018 5. Cook DA, Brydges R, Zendejas B, Hamstra SJ, Hatala R. Technology-enhanced simulation to assess health professionals: A systematic review of validity evidence, research methods, and reporting quality. Acad Med. 2013 Jun;88(6):872-83. doi: 10.1097/ACM.0b013e31828ffdcf. 6. Cook DA, Zendejas B, Hamstra SJ, Hatala R, Brydges R. What counts as validity evidence? Examples and prevalence in a systematic review of simulation-based assessment. Adv Health Sci Educ Theory Pract. 2014 May;19(2):233-50. doi: 10.1007/s10459-013-9458-4. Epub 2013 May 2. 7. Standards for Educational and Psychological Testing, 1999, American Educational Research Association, American Psychological Association and National Council on Measurement in Education: American Educational Research. 8. Rasch G. (1960/1980). Probabilistic models for some intelligence and attainment tests. (Copenhagen, Danish Institute for Educational Research), expanded edition (1980) with foreword and afterword by BD Wright. Chicago, IL: The University of Chicago Press. 9. Hamilton JM, et al., Toward effective pediatric minimally invasive surgical simulation. J Pediatr Surg, 2011. 46(1): p. 138-44. Disclosures None

health care sciences & services
Using Artificial Intelligence to Gauge Competency on a Novel Laparoscopic Training System

C Yoonhee Ryder,Nicole M Mott,Christopher L Gross,Chioma Anidi,Leul Shigut,Serena S Bidwell,Erin Kim,Yimeng Zhao,Blessing Ngoin Ngam,Mark J Snell,B Joon Yu,Pawel Forczmanski,Deborah M Rooney,David R Jeffcoach,Grace J Kim

DOI: https://doi.org/10.1016/j.jsurg.2023.10.007

Abstract:Objective: Laparoscopic surgical skill assessment and machine learning are often inaccessible to low-and-middle-income countries (LMIC). Our team developed a low-cost laparoscopic training system to teach and assess psychomotor skills required in laparoscopic salpingostomy in LMICs. We performed video review using AI to assess global surgical techniques. The objective of this study was to assess the validity of artificial intelligence (AI) generated scoring measures of laparoscopic simulation videos by comparing the accuracy of AI results to human-generated scores. Design: Seventy-four surgical simulation videos were collected and graded by human participants using a modified OSATS (Objective Structured Assessment of Technical Skills). The videos were then analyzed via AI using 3 different time and distance-based calculations of the laparoscopic instruments including path length, dimensionless jerk, and standard deviation of tool position. Predicted scores were generated using 5-fold cross validation and K-Nearest-Neighbors to train classifiers. Setting: Surgical novices and experts from a variety of hospitals in Ethiopia, Cameroon, Kenya, and the United States contributed 74 laparoscopic salpingostomy simulation videos. Results: Complete accuracy of AI compared to human assessment ranged from 65-77%. There were no statistical differences in rank mean scores for 3 domains, Flow of Operation, Respect for Tissue, and Economy of Motion, while there were significant differences in ratings for Instrument Handling, Overall Performance, and the total summed score of all 5 domains (Summed). Estimated effect sizes were all less than 0.11, indicating very small practical effect. Estimated intraclass correlation coefficient (ICC) of Summed was 0.72 indicating moderate correlation between AI and Human scores. Conclusions: Video review using AI technology of global characteristics was similar to that of human review in our laparoscopic training system. Machine learning may help fill an educational gap in LMICs where direct apprenticeship may not be feasible.
Construction and Surgical Training of Coronary Anastomosis on a Low-Cost Portable Simulator: Experience in a Peruvian Multicenter Study

W Samir Cubas,Anna Paredes-Temoche,Wildor R Dongo,Katherine E Inga,Wilfredo Luna-Victoria,Enrique Velarde-Revilla

DOI: https://doi.org/10.21470/1678-9741-2023-0479

2024-09-06

Abstract:Introduction: The operating room is no longer the ideal place for early surgica training of cardiothoracic surgery residents, forcing the search for simulation-based learning options. The study's aim was the construction and surgicaltraining of coronary anastomosis in a portable, low-cost, homemade simulator. Methods: This is an observational, analytical, and multicenter study. The simulator was built with common materials and was evaluated with the Objective Structured Assessment ofTechnical Skills (or OSATS) Modified. All junior and senior residents from nine national cardiothoracic surgery centers were considered for 90 days. Operative skill acquisition and time in the creation of side-to-side (S-T-S), end-to-side (E-T-S), and end-to-end (E-T-E) coronary anastomoses were evaluated. All sessions were recorded and evaluated by a single senior cardiothoracic surgeon during two time periods. Results: One hundred and forty residents were assessed in 270 sessions. In junior residents, a significant improvement in final scores was identified in S-T-S (use of Castroviejo needle holder, needle angles, and needle transfer) (P<0.05). In seniors, a significant improvement was identified in S-T-S (graft orientation, appropriate spacing, use of forceps, angles, and needle transfer) anastomoses (P<0.05). A significant improvement in the final anastomosis time of senior residents over junior residents was identified in S-T-S (8.11 vs. 11.22 minutes), E-T-S (7.93 vs. 10.10 minutes), and E-T-E (6.56 vs. 9.68 minutes) (P=0.039). Conclusion: Our portable and low-cost coronary anastomosis simulator is effective in improving operative skills in cardiothoracic surgery residents; therefore, skills acquired through simulation-based training transfer have a positive impact on the surgical environment.
Detection of oncogenic DNA viruses in colorectal cancer.

L. Giuliani,C. Ronci,D. Bonifacio,L. Di Bonito,C. Favalli,C. Perno,K. Syrjänen,M. Ciotti

2008-03-01

Anticancer Research

Abstract:BACKGROUND As a part of our search for oncogenic viruses as potential etiological agents in human malignancies, our studies on human papillomaviruses (HPV) were extended to analysis of the 3 polyomaviruses (SV40, BKV and JCV) in colorectal carcinomas. PATIENTS AND METHODS Archival tumour samples from 71 patients with colorectal cancer were analyzed for the sequences of SV40, BKV, JCV and HPV using PCR-based techniques. HPV genotypes were determined using sequencing and reverse blot hybridization (InnoLipa). RESULTS Amplification of BKV and JCV with the primer pair PEP-1 and PEP-2 and subsequent restriction digestion of the amplified products with BamH I disclosed BKV in 6/66 (9%) of the samples, whereas none contained JCV. SV40 was amplified in 10/66 (15.1%) samples and confirmed by sequencing analysis. In pair-wise analysis for co-infections, the samples were significantly different in their BKV-JCV and JCV-SV40 status, in contrast to their BKV-SV40 co-infection status. HPV DNA was detected in 22/66 (33.3%) of the samples analysed with either the MY09/11 or SPF primer mix. Of these 22 HPV infections, 7 were single-type infections and 15 contained multiple HPV types. HPV detection or type distribution showed no relationship to the gender of the patients or histological grade of the tumour. HPV status was not significantly related to detection of BKV, JCV or SV40. Similarly, in pair-wise analysis for co-infections, the samples were significantly different in their status of HPV-BKV (p=0.0006), HPV-JCV (p=0.0001), and HPV-SV40 (p=0.019), implicating that HPV and the 3 polyomaviruses are rarely detected concomitantly in the same samples. CONCLUSION Taking the known molecular mechanisms of action of these individual viruses, there is a chance that these viruses could alter the mechanisms of cell cycle control and inhibit apoptosis, thus potentially causing chromosomal instability and promoting colorectal oncogenesis.
Construct, content and face validity of the eoSim laparoscopic simulator on advanced suturing tasks

Erik Leijte,Elke Arts,Bart Witteman,Jack Jakimowicz,Ivo De Blaauw,Sanne Botden

DOI: https://doi.org/10.1007/s00464-018-06652-3

2019-01-22

Surgical Endoscopy

Abstract:BackgroundThe purpose of this study was to validate the eoSim, an affordable and mobile inanimate laparoscopic simulator with instrument tracking capabilities, regarding face, content and construct validity on complex suturing tasks.MethodsParticipants recruited for this study were novices (no laparoscopic experience), target group for this training (surgical/gynaecologic/urologic residents, > 10 basic and < 20 advanced laparoscopic procedures) and experts (> 20 advanced laparoscopic procedures). Each participant performed the intracorporeal suturing exercise (Task 1), an upside down needle transfer (Task 2, developed for this study) and an anastomosis needle transfer (Task 3). Following, the participants completed a questionnaire regarding their demographics and opinion on the eoSim in terms of realism, didactic value and usability. Measured outcome parameters were time, distance, percentage of instrument tip off-screen, working area, speed, acceleration and smoothness.ResultsIn total, 104 participants completed the study, of which 60 novices, 31 residents and 13 experts. Face and content validity results showed a mean positive opinion on realism (3.9 Task 1, 3.6 Task 2 and 3.7 Task 3), didactic value (4.0, 3.4 and 3.7, respectively) and usability (4.2. 3.7 and 4.0, respectively). There were no significant differences in these outcomes between the specified expertise groups. Construct validity results showed significant differences between experts, target group or novices for Task 1 in terms of time (means 339, 607 and 1224 s, respectively, p < 0.001) and distance (means 8.1, 15.6 and 21.7 m, respectively, p < 0.001). Task 2 showed significant differences between groups regarding time (p < 0.001), distance (p 0.003), off-screen (p < 0.001) and working area (p < 0.001). Task 3 showed significant differences between groups, after subanalyses, on total number of stitches (p < 0.001), time per stitch (p < 0.001) and distance per stitch (p < 0.001).ConclusionsThe results of this study indicate that the eoSim is a potential meaningful and valuable simulator in the training of suturing tasks.
A Novel Dry Simulator Model for Learning Comprehensive Endoscopic Retrograde Cholangiopancreatography/Endoscopic Sphincterotomy Procedures while Minimizing Adverse Bleeding Events (with Video)

Yutaka Hatayama,Takeshi Kanno,Tetsuya Takikawa,Ryotaro Matsumoto,Yutaro Arata,Suguo Suzuki,Yohei Ogata,Masahiro Saito,Xiaoyi Jin,Shin Miura,Waku Hatta,Shin Hamada,Kaname Uno,Kiyoshi Kume,Kazuhiro Kikuta,Naoki Asano,Akira Imatani,Tomoyuki Koike,Atsushi Masamune

DOI: https://doi.org/10.1159/000536217

2024-01-10

Digestion

Abstract:Introduction: Endoscopic retrograde cholangiopancreatography (ERCP) and endoscopic sphincterotomy (EST) are essential skills for performing endoscopic cholangiopancreatic procedures. However, these procedures have a high incidence of adverse events, and current training predominantly relies on patient-based approaches. Herein, we aimed to develop an ERCP/EST simulator model to address the need for safer training alternatives, especially for learners with limited ERCP experience. Methods: The model was designed to facilitate the use of actual endoscopic devices, supporting learning objectives that align with the components of the validated Bethesda ERCP Skill Assessment Tool (BESAT). BESAT focuses on skills, such as papillary alignment, maintenance of duodenoscope position, gentle and efficient cannulation, controlled sphincterotomy in the correct trajectory, and guidewire manipulation. Thirty gastroenterology trainees used the simulator between May 2022 and March 2023, and their satisfaction was assessed using a visual analog scale (VAS) and pre- and post-training questionnaires. Results: The novel simulator model comprised a disposable duodenal papillary section, suitable for incision with an electrosurgical knife, alongside washable upper gastrointestinal tract and bile duct sections for repeated use. The duodenal papillary section enabled reproduction of a realistic endoscope position and the adverse bleeding events due to improper incisions. The bile duct section allowed for the reproduction of fluoroscopic-like images, enabling learners to practice guidewire guidance and insertion of other devices. Following training, the median VAS score reflecting the expectation for model learning significantly increased from 69.5 (interquartile range [IQR]: 55.5–76.5) to 85.5 (IQR: 78.0–92.0) ( p < 0.01). All participants expressed a desire for repeated simulator training sessions. Conclusions: This innovative simulator could serve as a practical educational tool, particularly beneficial for novices in ERCP. It could facilitate hands-on practice with actual devices, enhancing procedural fluency and understanding of precise incisions to minimize the risk of bleeding complications during EST.

gastroenterology & hepatology
Simulation training of laparoscopic biliary-enteric anastomosis with a three-dimensional-printed model leads to better skill transfer: a randomized controlled trial

Jiliang Shen,Yaping Zhang,Bin Zhang,Chen Lu,Jiasheng Cao,Mingyu Chen,Bin Zheng,Jin Yang

DOI: https://doi.org/10.1097/js9.0000000000001079

2024-01-11

International Journal of Surgery

Abstract:Aim: A new simulation model and training curriculum for laparoscopic bilioenteric anastomosis has been developed. Currently, this concept lacks evidence for the transfer of skills from simulation to clinical settings. This study was conducted to determine whether training with a three-dimensional (3D) bilioenteric anastomosis model result in greater transfer of skills than traditional training methods involving video observation and a general suture model. Methods: Fifteen general surgeons with no prior experience in laparoscopic biliary-enteric anastomosis were included in this study and randomised into three training groups: video observation only, practice using a general suture model, and practice using a 3D-printed biliary-enteric anastomosis model. Following five training sessions, each surgeon was asked to perform a laparoscopic biliary-enteric anastomosis procedure on an isolated swine organ model. The operative time and performance scores of the procedure were recorded and compared among the three training groups. Results: The operation time in the 3D-printed model group was significantly shorter than the suture and video observation groups ( P =0.040). Furthermore, the performance score of the 3D-printed model group was significantly higher than those of the suture and video observation groups ( P =0.001). Finally, the goal score for laparoscopic biliary-enteric anastomosis in the isolated swine organ model was significantly higher in the 3D model group than in the suture and video observation groups ( P =0.004). Conclusions: The utilisation of a novel 3D-printed model for simulation training in laparoscopic biliary-enteric anastomosis facilitates improved skill acquisition and transferability to an animal setting compared with traditional training techniques.

surgery
Validation of a dynamic 4D microsurgical bypass simulator for training and teaching microvascular anastomosis techniques with blood flow and fluorescence imaging

Hanne Eline R Vanluchene,David Bervini,Ross Straughan,Samuel Maina,Fredrick J Joseph

DOI: https://doi.org/10.1016/j.wnsx.2024.100396

2024-09-21

Abstract:Objective: Microvascular anastomosis is challenging, and training surgeons to develop and maintain skills is imperative. Current training models either miss the simulation of the surgical workflow, lack 3D key-hole space, need ethical approval, require special preparation, or lack realism. To circumvent these issues, this study describes the use of a mixed reality 3D printed model with integrated blood flow for training cerebral anastomosis and assesses its validity. Methods: Different-sized 3D-printed artificial micro artery models in a 3D brain space with a keyhole opening were used. The model was connected to a 4D simulator to induce pulsatile blood flow. Neurosurgical microscopes and exoscopes were used for visualization. Nine participants (n = 6 board-certified cerebrovascular neurosurgeons; n = 3 in-training) participated in the study and practiced anastomosis techniques with the simulator. Two senior, experienced vascular neurosurgeons mentored live teaching activity on the simulator. Participants completed a survey to score the face and content validity of the simulation on a 5-point Likert scale. Simulation time and anastomosis score differences between in-training and board-certified participants were compared for construct validity. Results: Participants scored the simulation difficulty similar to actual surgery, proving face validity. All participants agreed that practice on the provided simulator models would improve bypass techniques (μ = 4.67/5 ± 0.47) and instrument handling (μ = 4.56/5 ± 0.68). Board-certified participants had better anastomosis scores than in-training participants (non-significant difference). Conclusions: The 4D simulator and the high-fidelity artificial 3D printed model effectively simulated actual bypass surgery in a key-hole fashion with blood flow abilities. Limited resources and preparation time are needed for the training setup. The model provides benefits in learning and maintaining anastomosis skills and allows for easy adaptation to different microanatomical scenarios.
Clinical application values of a novel synthetic training simulator for bulbar urethral anastomosis

Jing‐Dong Xue,Ping Zhang,Yue‐Min Xu,Ying‐Long Sa,Hui‐Quan Shu,Lin Wang,Hong Xie,Chao Li,Wei Zhang,Chao Feng,Deng‐Long Wu

DOI: https://doi.org/10.1002/bco2.426

2024-09-02

BJUI Compass

Abstract:Purpose This study aimed to report a newly developed, high‐fidelity synthetic simulator to simulate excision and primary anastomotic (EPA) bulbar urethroplasty and its clinical use for new practitioners in shortening the learning curve. Material and Methods The bulbar urethral anastomosis simulator consists of several standardized components created according to the actual size of the male patient. Interns, novice residents, and fellows inexperienced with urethral reconstruction (n = 10, 5, 5) from different medical centres were invited to participate in the training programme. Two reconstructive urology experts monitored each practice. Following the training, three kinds of validity testing were used to assess the simulator: face, content, and construct. In the intern group, the task performance in the first five training sessions and the last five training ones were compared using a self‐control approach. In the resident and fellow group, the real surgical data, including estimated blood loss, operative duration, and 6‐month post‐operative success rate of trainees after training, are plotted, which are compared with that of reconstructive urology experts (n = 5) included retrospectively to study the effectiveness of the simulator in shortening the learning curve. Results The overall mean satisfaction rate for the simulators was inspiring and evaluated by experts. In the intern group, significant improvement can be achieved through 10 training sessions (p
The Impact of Simulator Training of Vascular Anastomosis and Video Assessment for Surgical Residents

Hye Young Woo,Ara Cho,Myeonghyeon Ko,Jiyoung Shin,Seung-Kee Min,Sangil Min,Ahram Han,Jongwon Ha,Sanghyun Ahn

DOI: https://doi.org/10.1016/j.avsg.2024.03.034

2024-08-08

Abstract:Background: The rapid increase of minimally invasive surgery and the shortened training period for surgical residents has resulted in limited opportunities to acquire proficiency in open surgical techniques, such as vascular anastomosis. However, vascular anastomosis remains an essential skill in every surgery for bleeding control. This study aimed to validate the effectiveness of surgical education model for vascular anastomosis and assess the impact on the comprehension, skill, and confidence of surgical residents in performing vascular anastomosis. Methods: A total of 21 surgical residents with first to third years of experience at Seoul National University Hospital participated in a 4-week vascular anastomosis training program. The program included an educational lecture and the performance of an end-to-side anastomosis on a procedural model, with evaluations being conducted using the Objective Structured Assessment of Technical Skills (OSATS) and the End-Product Rating Score (EPRS) in pretraining and posttraining surveys. Results: Significant improvement was observed in the OSATS score (from 9.22 ± 2.4 in week 1 to 12.87 ± 3.1 in week 4; P < 0.001) and the EPRS score (from 12.47 ± 4.1 in week 1 to 17.57 ± 2.2 in week 4; P < 0.001). Additionally, the surgical performance time significantly decreased from 20.99 ± 4.6 min to 16.33 ± 4.2 min (P = 0.019) CONCLUSIONS: Simulator training of in vitro vascular anastomosis, when accompanied by expert-led instruction, can effectively enhance the surgical proficiency, confidence, and overall surgical outcomes of residents, as inferred from the observed improvements in OSATS and EPRS scores. The results suggest that integration of this training model into surgical curricula could be a promising strategy for enhancing vascular surgical training.
Development and validation of metric-based-training to proficiency simulation curriculum for upper gastrointestinal endoscopy using a novel assessment checklist

Nahla Azzam,Nehal Khamis,Majid Almadi,Faisal Batwa,Fahad Alsohaibani,Abdulrahman Aljebreen,Ahmad Alharbi,Yasser Alaska,Turki Alameel,Peter Irving,Richard M Satava

DOI: https://doi.org/10.4103/sjg.SJG_113_20

2020-07-21

Abstract:Background/aims: : This study aimed to design a structured simulation training curriculum for upper endoscopy and validate a new assessment checklist. Materials and methods: A proficiency-based progression stepwise curriculum was developed consisting of didactic, technical and non-technical components using a virtual reality simulator (VRS). It focused on: scope navigation, anatomical landmarks identification, mucosal inspection, retro-flexion, pathology identification, and targeting biopsy. A total of 5 experienced and 10 novice endoscopists were recruited. All participants performed each of the selected modules twice, and mean and median performance were compared between the two groups. Novices pre-set level of proficiency was set as 2 standard deviations below the mean of experts. Performance was assessed using multiple-choice questions for knowledge, while validated simulator parameters incorporated into a novel checklist; Simulation Endoscopic Skill Assessment Score (SESAS) were used for technical skills. Results: : The following VRS outcome measures have shown expert vs novice baseline discriminative ability: total procedure time, number of attempts for esophageal intubation and time in red-out. All novice trainees achieved the preset level of proficiency by the end of training. There were no statistically significant differences between experts' and trainees' rate of complications, landmarks identification and patient discomfort. SESAS checklist showed high degree of agreement with the VRS metrices (kappa = 0.83) and the previously validated direct observation of procedural skills tool (kappa = 0.90). Conclusion: : The Fundamentals of Gastrointestinal Endoscopy simulation training curriculum and its SESAS global assessment tool have been primarily validated and can serve as a valuable addition to the gastroenterology fellowship programs. Follow up study of trainee performance in workplaces is recommended for consequences validation.
Use of acrylic materials in laryngology.

C. Norris

Abstract:
Novel, intermediate‐fidelity simulator for aortic arch surgery for the cardiothoracic surgical trainee

Shantel Chang,Christopher Cole

DOI: https://doi.org/10.1111/ans.18885

IF: 1.7

2024-01-31

ANZ Journal of Surgery

Abstract:Training cardiothoracic surgeons in open aortic surgery is challenging due to the complexity of technical skills and limited operator experience. The study reports on a reproducible, intermediate‐fidelity simulator for aortic surgery. Background Training cardiothoracic surgeons in open aortic surgery is challenging due to limited operator experience, low patient volume and technically demanding skills to be performed within a deep thoracic cavity. Surgical simulation has become a cornerstone of cardiothoracic surgical training and has been shown to improve skill acquisition and performance in the operating theatre. Due to the complexity of aortic surgery, there is a paucity of simulators that are concomitantly accessible and of sufficient fidelity. The purpose of this study was to develop a reproducible, intermediate‐fidelity simulator for aortic surgery. Method This novel simulator was constructed from plastic storage containers to simulate the depth of a thoracic cavity. Head vessels and distal arch were reconstructed within the stimulator with synthetic Dacron polyester grafts to maximize model fidelity. A porcine or bovine heart was used for the simulation of aortic root replacement and anastomosis to the distal arch graft. Results The simulator was reproduced in a wet‐lab skills session at an annual Australian cardiothoracic trainee meeting. Qualitative feedback was obtained from the current cardiothoracic trainees. It is a feasible model for the practice of aortic surgery. Conclusion As the surgical education paradigm shifts towards simulation, this easily reproducible, intermediate‐fidelity model provides an effective avenue to equip the trainee for the operating room and is a method of surgical training that can be considered by colleges.

surgery
Development of an In Situ Thoracic Surgery Crisis Simulation Focused on Nontechnical Skill Training

Joel Bierer,Eustatiu Memu,William R Leeper,Dalilah Fortin,Eric Fréchette,Richard Inculet,Richard Malthaner

DOI: https://doi.org/10.1016/j.athoracsur.2018.01.058

Abstract:Background: Our vision was to develop an inexpensive training simulation in a functional operating room (in situ) that included surgical trainees and nursing and anesthesia staff to focus on effective interprofessional communication and teamwork skills. Methods: The simulation scenario revolved around an airway obstruction by residual tumor after pneumonectomy. This model included our thoracic operating room with patient status displayed by an open access vital sign simulator and a reversibly modified Laerdal airway mannequin (Shavanger, Norway). The simulation scenario was run seven times. Simulations were video recorded and scored with the use of Non-Technical Skills for Surgeons (NOTSS) and TeamSTEPPS2. Latent safety threats (LSTs) and feedback were obtained during the debriefing after the simulation. Feedback was captured with the Method Material Member Overall (MMMO) questionnaire. Results: Several LSTs were identified, which included missing and redundant equipment and knowledge gaps in participants' roles. Consultant surgeons received a higher overall score than thoracic surgery fellows on both NOTSS (3.8 versus 3.3) and TeamSTEPPS2 (4.1 versus 3.2) evaluations, suggesting that the scenario effectively differentiated learners from experts with regards to nontechnical skills. The MMMO overall simulation experience score was 4.7 of 5, confirming a high-fidelity model and useful experiential learning model. At the Canadian Thoracic Bootcamp, the MMMO overall experience score was 4.8 of 5, further supporting this simulation as a robust model. Conclusions: An inexpensive in situ intraoperative crisis simulation model for thoracic surgical emergencies was created, implemented, and demonstrated to be effective as a proof of concept at identifying latent threats to patient safety and differentiating the nontechnical skills of trainees and consultant surgeons.
Endotracheal Intubation Performance in Novices: Comparing the Training Effect Resulting From Two Airway Management Training Simulators

Victoria A Roach,David J Traina,David M Hananel,Jason R Speich,Jack E Norfleet,Robert M Sweet

DOI: https://doi.org/10.1093/milmed/usae148

2024-08-19

Abstract:Introduction: Between 2011 and 2014, the Combat Casualty Training Consortium research study sought to evaluate all aspects of combat casualty care, including mortality, with a special focus on the incidence and causes of potentially preventable deaths among American combat fatalities. This study identified a major training gap in critical airway management. Because of the high rate of morbidity and mortality associated with poor or incorrect airway management, an effort to address this training gap was necessary. Materials and methods: This experiment compared the training using the Advanced Joint Airway Management System, a novel high-fidelity airway simulator, relative to one of the most utilized simulators for endotracheal intubation (ETI) via a parallel group randomized control trial design. Before training, participants (n = 19) attempted an ETI on a cadaver using direct laryngoscopy. Performance during the attempt was recorded and scored by trained blinded raters. Participants were then randomly allocated to either novel or conventional training. Post-training, participants completed a second ETI under the same parameters. Analysis was completed via 2 × 2 mixed analysis of variance for (1) ETI Score, (2) Errors, (3) Critical Failures, and (4) Duration, across both the pre- and post-training tests and between the two groups. Results: A priori power analysis required a total sample size of 84 participants in this experimental design. Consequently, this study is under-powered to reach statistical significance. Scores for all trainees did improve with training, yet analyses did not reveal a difference in overall ETI score between the novel and conventional training group, at baseline or at the post-training test (P = .249). Conclusion: The Advanced Joint Airway Management System simulator presents a training effect that is comparable to the conventional training model. However, given this study's small sample size, these results must be considered preliminary and further research is merited to draw firm conclusions about its impact on trainee performance. Future studies engaging larger cohorts of trainees and exploring the other capabilities of the Advanced Joint Airway Management System (cricothyroidotomy, needle chess decompression) are needed to further examine the educational potential of this novel airway management training system.
[Minimally invasive CABG MIDCAB/OPCAB].

G. Watanabe

2003-04-01

Abstract:
Relationship of the electrocardiographic response to exercise to geometric and functional findings in aortic regurgitation.

P. Kligfield,O. Ameisen,P. Okin,N. Niles,C. Hochreiter,M. Roman,N. Sato,R. Devereux,J. Borer

DOI: https://doi.org/10.1016/0002-8703(87)90918-5

IF: 5.099

1987-05-01

American Heart Journal

Abstract:
Virtual Reality Simulator: Unveiling the "Inner" Skills of Endoscopists

Bei Zhao,Wenqi Sun,Xinrong Wu,Yifan Li,Weiwei Wang,Xiaotan Dou,Wen Li,Lei Wang,Min Chen

DOI: https://doi.org/10.21203/rs.3.rs-4223971/v1

2024-01-01

Abstract:Abstract Background This study aimed to create a simulation-based assessment system for evaluating endoscopist proficiency due to the absence of evidence-based scoring systems. Methods After feasibility and clinical relevance assessments of simulator modules by gastroenterology experts, a colonoscopy module with relatively high operational difficulty was chosen for testing and underwent preliminary validation. Additionally, a questionnaire was designed to collect information about endoscopist experience, including the number of colonoscopy and gastroscope performed, insertion time, cecal intubation rate, early colorectal cancer detection rate. Subsequently, 38 physicians from our hospital's endoscopy center completed the questionnaire and underwent virtual reality simulator training. The endoscopist's proficiency was assessed in real-time based on scoring criteria, including total operation time, percentage of examined mucosa, time to reach the cecum, screening efficiency, proportion of time with clear vision, and total time spent on colonoscope looping. Results In our study, no statistically significant differences were found among endoscopy experts, specialist attending physicians, and resident physicians in terms of their experience and early cancer detection rates (P > 0.05). However, the VR system scores, including operational completion time, time to reach the cecum, and the percentage of observed mucosa, were correlated with the number of colonoscopies completed by the endoscopists (P < 0.05). Operational completion time and time to reach the cecum were strongly correlated with usual insertion times (P < 0.001), and the percentage of observed mucosa score was related to early disease detection rates. Notably, screening efficiency and endoscopic clarity scores were not correlated with physicians' disease detection rates (P > 0.05). Conclusion Virtual reality endoscopy can be utilized to assess endoscopist proficiency and provide targeted guidance to enhance their clinical practice. Based on these findings, further expansion and enrichment of simulator content, as well as optimization of training methods, can be pursued promisingly in the future.

Bioavailability od digoxin.

Validity and reliability evidence support task-specific metrics for laparoscopic fundoplication

Validation of a virtual intracorporeal suturing simulator

Board #322 - Technology Innovation Development and Preliminary Validation of a Novel Ventriculostomy Simulator (Submission #8635)

Using Artificial Intelligence to Gauge Competency on a Novel Laparoscopic Training System

Construction and Surgical Training of Coronary Anastomosis on a Low-Cost Portable Simulator: Experience in a Peruvian Multicenter Study

Detection of oncogenic DNA viruses in colorectal cancer.

Construct, content and face validity of the eoSim laparoscopic simulator on advanced suturing tasks

A Novel Dry Simulator Model for Learning Comprehensive Endoscopic Retrograde Cholangiopancreatography/Endoscopic Sphincterotomy Procedures while Minimizing Adverse Bleeding Events (with Video)

Simulation training of laparoscopic biliary-enteric anastomosis with a three-dimensional-printed model leads to better skill transfer: a randomized controlled trial

Validation of a dynamic 4D microsurgical bypass simulator for training and teaching microvascular anastomosis techniques with blood flow and fluorescence imaging

Clinical application values of a novel synthetic training simulator for bulbar urethral anastomosis

The Impact of Simulator Training of Vascular Anastomosis and Video Assessment for Surgical Residents

Development and validation of metric-based-training to proficiency simulation curriculum for upper gastrointestinal endoscopy using a novel assessment checklist

Use of acrylic materials in laryngology.

Novel, intermediate‐fidelity simulator for aortic arch surgery for the cardiothoracic surgical trainee

Development of an In Situ Thoracic Surgery Crisis Simulation Focused on Nontechnical Skill Training

Endotracheal Intubation Performance in Novices: Comparing the Training Effect Resulting From Two Airway Management Training Simulators

[Minimally invasive CABG MIDCAB/OPCAB].

Relationship of the electrocardiographic response to exercise to geometric and functional findings in aortic regurgitation.

Virtual Reality Simulator: Unveiling the "Inner" Skills of Endoscopists