Abstract:Introduction: Electrospinning is a manufacturing technique that creates a net of nano and microfibres able to mimic the natural extracellular matrix (ECM) of biological tissue. Electrospun scaffolds' morphology and mechanical behaviour can be tailored by modifying the environmental, solution and process parameters. This study aims to produce biomimetic vascular implants optimising the manufacturing set up through two machine learning techniques and statistical approaches. Methods: Polyvinyl alcohol (PVA) based scaffolds were produced by modifying the concentration of the polymer, flow rate, voltage, type of collector, diameter of the needle, distance between needle and collector and revolutions of the mandrel. The scaffolds were morphologically and mechanically characterised using scanning electron microscopy and mechanical testing respectively to inform the morphological model (simultaneously predicting diameter of the fibres and inter-fibre separation) and mechanical model (predicting strain at rupture and ultimate tensile strength). Results: Prediction and traditional techniques led to an optimum set up of: 12% PVA, 1 ml/h flow rate, 20 kV, 8 cm between the needle, 18 G gauge needle, rotational mandrel of 15 cm and 2000 rpm. Optimised PVA scaffolds replicated the mechanical properties and morphology of the vascular tissue with an ultimate tensile strength of 6.17 ± 0.18 MPa, a strain at break of 97.39 ± 5.06, fibre diameters of 126 ± 6.11 nm and inter-fibre separation of 1488 ± 91.99 nm. Discussion: This work revealed for the first time that machine learning Chi-squared Automatic Interaction Detection (CHAID) models are a novel and visual route to elect the optimum manufacturing set up to develop biomimetic vascular implants. Novel two-output Artificial Neural Networks (ANN) and multivariate analysis of variance and covariance (MANOVA, MANCOVA) models presented comparable prediction results (R2=0.91); however, two-output ANN predicted models demonstrated to be the most powerful tool for non-parametric conditions, showing cross-validation mean squared errors (MSE) of 0.0001943. Multi Linear Regression models (MLR) exhibited the lowest accuracy in their predictions (R2=0.6). Machine learning, statistical approaches and traditional characterisation methods were studied to successfully achieve vascular substitutes with analogous biomechanical behaviour and physical structure to the native vascular tissue.

Machine learning to mechanically assess 2D and 3D biomimetic electrospun scaffolds for tissue engineering applications: Between the predictability and the interpretability

Towards the ideal vascular implant: Use of machine learning and statistical approaches to optimise manufacturing parameters

Machine learning to predict morphology, topography and mechanical properties of sustainable gelatin-based electrospun scaffolds

Machine learning-guided morphological property prediction of 2D electrospun scaffolds: the effect of polymer chemical composition and processing parameters

A Machine Learning Approach to Model the Electrospinning Process of Biocompatible Materials

Machine learning models to predict the relationship between printing parameters and tensile strength of 3D Poly (lactic acid) scaffolds for tissue engineering applications

Machine Learning approaches for the design of biomechanically compatible bone tissue engineering scaffolds

Artificial Intelligence Aided Design of Tissue Engineering Scaffolds Employing Virtual Tomography and 3D Convolutional Neural Networks

Controlling Mechanical Properties of Medical-Grade Scaffolds through Electrospinning Parameter Selection

Computational fluid dynamics study on three‐dimensional polymeric scaffolds to predict wall shear stress using machine learning models for bone tissue engineering applications

An explainable machine learning-based probabilistic framework for the design of scaffolds in bone tissue engineering

A practical machine learning approach for predicting the quality of 3D (bio)printed scaffolds

Electrospinning and crosslinking of low-molecular-weight poly(trimethylene carbonate-co-(L)-lactide) as an elastomeric scaffold for vascular engineering

Leveraging Machine Learning for Optimized Mechanical Properties and 3D Printing of PLA/cHAP for Bone Implant

Manufacturing of Anisotropic Protein‐Based Scaffolds to Precisely Mimic Native‐Tissue Mechanics

3D printed mesh reinforcements enhance the mechanical properties of electrospun scaffolds

Mesenchymal stem cell cultivation in electrospun scaffolds: mechanistic modeling for tissue engineering

Advancing scaffold porosity through a machine learning framework in extrusion based 3D bioprinting

Polymeric Electrospinning for Musculoskeletal Regenerative Engineering

Multimodal Three-Dimensional Printing for Micro-Modulation of Scaffold Stiffness Through Machine Learning