Abstract:Introduction: Electrospinning is a manufacturing technique that creates a net of nano and microfibres able to mimic the natural extracellular matrix (ECM) of biological tissue. Electrospun scaffolds' morphology and mechanical behaviour can be tailored by modifying the environmental, solution and process parameters. This study aims to produce biomimetic vascular implants optimising the manufacturing set up through two machine learning techniques and statistical approaches. Methods: Polyvinyl alcohol (PVA) based scaffolds were produced by modifying the concentration of the polymer, flow rate, voltage, type of collector, diameter of the needle, distance between needle and collector and revolutions of the mandrel. The scaffolds were morphologically and mechanically characterised using scanning electron microscopy and mechanical testing respectively to inform the morphological model (simultaneously predicting diameter of the fibres and inter-fibre separation) and mechanical model (predicting strain at rupture and ultimate tensile strength). Results: Prediction and traditional techniques led to an optimum set up of: 12% PVA, 1 ml/h flow rate, 20 kV, 8 cm between the needle, 18 G gauge needle, rotational mandrel of 15 cm and 2000 rpm. Optimised PVA scaffolds replicated the mechanical properties and morphology of the vascular tissue with an ultimate tensile strength of 6.17 ± 0.18 MPa, a strain at break of 97.39 ± 5.06, fibre diameters of 126 ± 6.11 nm and inter-fibre separation of 1488 ± 91.99 nm. Discussion: This work revealed for the first time that machine learning Chi-squared Automatic Interaction Detection (CHAID) models are a novel and visual route to elect the optimum manufacturing set up to develop biomimetic vascular implants. Novel two-output Artificial Neural Networks (ANN) and multivariate analysis of variance and covariance (MANOVA, MANCOVA) models presented comparable prediction results (R2=0.91); however, two-output ANN predicted models demonstrated to be the most powerful tool for non-parametric conditions, showing cross-validation mean squared errors (MSE) of 0.0001943. Multi Linear Regression models (MLR) exhibited the lowest accuracy in their predictions (R2=0.6). Machine learning, statistical approaches and traditional characterisation methods were studied to successfully achieve vascular substitutes with analogous biomechanical behaviour and physical structure to the native vascular tissue.

Machine learning-guided morphological property prediction of 2D electrospun scaffolds: the effect of polymer chemical composition and processing parameters

Machine learning to mechanically assess 2D and 3D biomimetic electrospun scaffolds for tissue engineering applications: Between the predictability and the interpretability

A Machine Learning Approach to Model the Electrospinning Process of Biocompatible Materials

Machine learning to predict morphology, topography and mechanical properties of sustainable gelatin-based electrospun scaffolds

Fabrication of Heterogeneous Scaffolds Using Melt Electrospinning Writing: Design and Optimization

Electrospun nanofiber membrane diameter prediction using a combined response surface methodology and machine learning approach

A practical machine learning approach for predicting the quality of 3D (bio)printed scaffolds

Data-Driven Machine Learning Approach for Modeling the Production and Predicting the Characteristics of Aligned Electrospun Nanofibers

Deep learning-assisted morphological segmentation for effective particle area estimation and prediction of interfacial properties in polymer composites

Controlling Mechanical Properties of Medical-Grade Scaffolds through Electrospinning Parameter Selection

A deep learning convolutional neural network and multi-layer perceptron hybrid fusion model for predicting the mechanical properties of carbon fiber

Design, fabrication, and analysis of spatially heterogeneous scaffold by melt electrospinning writing of poly(ε‐Caprolactone)

Optimization of mechanical properties of multiscale hybrid polymer nanocomposites: A combination of experimental and machine learning techniques

Stochastic Multiscale Modeling of Electrical Conductivity of Carbon Nanotube Polymer Nanocomposites: An Interpretable Machine Learning Approach

Prediction of Carbon Nanostructure Mechanical Properties and Role of Defects Using Machine Learning

Towards the ideal vascular implant: Use of machine learning and statistical approaches to optimise manufacturing parameters

Advancing scaffold porosity through a machine learning framework in extrusion based 3D bioprinting

Single-channel and multi-channel electrospinning for the fabrication of PLA/PCL tissue engineering scaffolds: comparative study of the materials physicochemical and biological properties

Fabrication of poly (ϵ-caprolactone) microfiber scaffolds with varying topography and mechanical properties for stem cell-based tissue engineering applications

MechProNet: Machine Learning Prediction of Mechanical Properties in Metal Additive Manufacturing

Machine Learning approaches for the design of biomechanically compatible bone tissue engineering scaffolds