Effect of diabetes and time after in vivo insulin administration on ketogenesis and gluconeogenesis in isolated rat hepatocytes.

M. Kaloyianni,R. Freedland

DOI: https://doi.org/10.1016/0020-711X(90)90178-6

International Journal of Biochemistry

Abstract:

What problem does this paper attempt to address?

Silica gel-based monoliths prepared by the sol-gel method: facts and figures.

A. Siouffi

DOI: https://doi.org/10.1016/S0021-9673(03)00510-7

IF: 4.601

2003-06-06

Journal of Chromatography A

Abstract:
Surfactant-enhanced coagulation and flocculation improves the removal of perfluoroalkyl substances from surface water

Amith Sadananda Maroli,Yi Zhang,Jonathan Lubiantoro,Arjun Venkatesan

DOI: https://doi.org/10.1039/d4va00093e

2024-08-15

Environmental Science Advances

Abstract:Coagulation/flocculation is a widely used water and wastewater treatment process due to its low cost, simplicity, and effectiveness. However, the process is not effective in the treatment of per- and polyfluoroalkyl substances (PFAS), the presence and treatment of which is an ongoing challenge for water providers. Here, we explore cationic surfactant-enhanced coagulation as a process modification to target the removal of PFAS in existing coagulation/flocculation systems. Batch experiments, in jar testing apparatus, were performed to assess the removal of two short-chain and two long-chain PFAS at an initial concentration of 10 μg/L with the addition of cetyltrimethylammoniumg chloride (CTAC) as the coagulant-aid. Our findings suggest that elevated coagulant dose (60 mg/L of alum or 100 mg/L of FeCl3) coupled with the addition of a cationic surfactant (1 mg/L of CTAC) significantly enhanced the removal of both short-chain (perfluorobutane sulfonate: PFBS removal to >40%) and long-chain PFAS (perfluorooctanoic acid: PFOA and perfluorooctane sulfonate: PFOS removal to >80%), with FeCl3 showing better performance than alum. Sulfonates (PFBS, PFOS) were shown to be removed more efficiently compared to carboxylates (PFBA, PFOA), presumably due to their higher hydrophobicity leading to better interactions with the flocs. Furthermore, CTAC in combination with traditionally used additives such as Powdered Activated Carbon (PAC), served as a better aid for PFAS treatment and improved the removal of PFBS, PFOA, and PFOS to >98%. This study highlights that introducing a cost-effective pre-treatment with a cationic surfactant to existing conventional treatment systems can improve the performance efficiency in treating PFAS-contaminated waters.
Commercial‐scale removal of short‐chain PFAS in a batch‐wise adsorptive bubble separation process by dosing with cationic co‐surfactant

Paul Stevenson,Stoyan I. Karakashev

DOI: https://doi.org/10.1002/rem.21767

2023-09-23

Abstract:Studies performed by Burns et al. in 2021 and 2022 demonstrated that a three‐stage batch‐wise adsorptive bubble separation process, surface active foam fractionation (SAFF), is effective at removing most per‐ and polyfluoroalkyl substances (PFASs) from contaminated groundwaters and landfill leachates. However, PFAS species with very low adsorption coefficients to bubble surfaces are difficult to remove, which is parallel to the difficulties in removing short‐chain PFAS in granulated activated carbon beds and other solid media. It is well known that the adsorption coefficient to bubble surfaces improves in the presence of electrolytes in solution and it has previously been shown that this improves the removal of PFAS. By developing a correlation for the removal percentage of one species or another of PFAS due to SAFF in commercial‐scale processes as a function of the adsorption coefficient, it is possible to generally estimate the removal percentage of any PFAS. The addition of a cationic co‐surfactant, cetrimonium bromide, to the feed can significantly further improve the adsorption coefficient and, as a consequence, materially improve the removal of short‐chain PFAS due to SAFF. A method for estimating this improved performance is in qualitative agreement with plant trials of SAFF at a North American site with a history of groundwater contamination due to the use of aqueous film forming foams firefighting foams, but the precise improvements appear to be dependent upon the concentration of the added co‐surfactant. The required concentration of co‐surfactant is significantly larger than might be expected on charge equivalence considerations, and this may be due to its consumption by other species in the feed, including PFAS that have not been accounted for. It is noted that the SAFF process may not be true foam fractionation and may, instead, be a bubble fractionator, both of which can be collectively described by the term "adsorptive bubble separation processes."
Removing per- and polyfluoroalkyl substances (PFAS) in water by foam fractionation

Yifei Wang,Yuqing Ji,Viktor Tishchenko,Qingguo Huang

DOI: https://doi.org/10.1016/j.chemosphere.2022.137004

IF: 8.8

2022-11-10

Chemosphere

Abstract:Treatment of large volumes of waters contaminated by per- and polyfluoroalkyl substances (PFAS) remains a challenge. This work presented a systematic study on PFAS removal by foam fractionation (FF). Experiments were conducted on both laboratory-spiked and environmental water samples containing PFASs. It is found that higher air flow, greater ionic strength, and addition of thickener boosted PFAS removal in the defoamed bottom solutions and intensified enrichment in the collected foam. FF treatments of a landfill leachate, a groundwater contaminated by aqueous film-forming foams, and a wastewater treatment plant effluent sample were evaluated. The removal reached above 70% for most monitored PFASs, except the ones of short alkyl chains. PFAS concentrations in the final collected foams were up to over 30 × than that in the original samples. Analysis using high-resolution mass spectrometry revealed enrichment of non-target PFASs by FF. The results of this study demonstrate great effectiveness of FF in removing most PFASs from waters, producing low-volume, highly concentrated solutions of PFASs in all tested environmental samples.

environmental sciences
Impact of Salinity and Temperature on Removal of PFAS Species from Water by Aeration in the Absence of Additional Surfactants: A Novel Application of Green Chemistry Using Adsorptive Bubble Fractionation

Anthony L. Morrison,Vladimir Strezov,Robert K. Niven,Mark P. Taylor,Scott P. Wilson,Jianlong Wang,David J. Burns,Peter J. C. Murphy

DOI: https://doi.org/10.1021/acs.iecr.3c00150

2023-01-01

Industrial & Engineering Chemistry Research

Abstract:Aeration of water contaminated with per-and polyfluor-oalkyl substances (PFASs) derived from the historical use of aqueous film-forming foams used in firefighting training and incident responses has been demonstrated to promote separation/concentration of PFAS by adsorptive bubble fractionation. This study examined the efficacy of changes in the environmental and process parameters, salinity, temperature, and aeration time on PFAS removal efficiency in the absence of additional amphiphilic substances, such as co-surfactants. The results demonstrate that the bubble fractionation process can operate effectively across a wide range of saline and temperature regimes and achieve high levels of overall PFAS removal (>95%). Removal by bubble fractionation of some short-chain PFAS species, characterized by lower air-water adsorption coefficients, was improved by both increased electrolyte (i.e., salt) and with decreased temperature in the treated water. Conversely, removal of total PFAS decreased slightly (to 93%) when processing higher temperature (37 degrees C) feedwater. The experiments demonstrate the viability of bubble fractionation of contaminated aqueous media as a primary PFAS removal step prior to PFAS concentration and subsequent destruction.
Air-water Interfacial Properties of Perfluorosulfonic Acid Salts with Different Chain Lengths

Muchu Zhou,Zahra Abbasian Chaleshtari,Bor-Jier Shiau,Brian P. Grady,Reza Foudazi

DOI: https://doi.org/10.1016/j.colsurfa.2024.134129

IF: 5.518

2024-05-04

Colloids and Surfaces A Physicochemical and Engineering Aspects

Abstract:Perfluorosulfonic acids (PFSA) are a class of per- and polyfluoroalkyl substances (PFAS), which have been extensively used in numerous applications. The toxicity and bioaccumulation of PFAS have become a serious worldwide problem. Foam fractionation has been suggested as a promising remediation method for PFAS removal owing to the amphiphilic nature of most of the currently existing PFAS in the environment, allowing them to migrate to the air-water interface during the foaming process. Nevertheless, the current challenge for widespread utilization of foam fractionation is its low removal efficiency, especially for short-chain PFAS. Foam fractionation performance depends on the air-water interfacial properties as well as the ability for PFAS to adsorb at the air-water interface. In the present study, therefore, we investigate surface tensions of PFSA with long and short chain lengths. Different adsorption models are studied to estimate maximum surface excess concentrations for various PFSA. Our results indicate that long-chain PFSA have lower surface tensions, higher surface activities, and form more rigid air-water interfaces. This study marks the first investigation of dilatational interfacial rheology of PFAS, as well as addressing the gap in understanding PFAS interfacial rheology by focusing on the quantification the storage and loss interfacial moduli, which are known to play a significant role in the foaming process.

chemistry, physical
PharmGKB summary: peginterferon-&agr; pathway

S. Shuldiner,L. Gong,A. Muir,R. Altman,T. Klein

DOI: https://doi.org/10.1097/FPC.0000000000000158

2015-09-01

Abstract:Departments of Genetics, Bioengineering, Stanford University, Stanford, California and Duke Clinical Research Institute, Duke University, Durham, North Carolina, USA Correspondence to Teri E. Klein, PhD, Department of Genetics, Stanford School of Medicine, Shriram Center, 443 Via Ortega, Room 213, Stanford University, Stanford, CA 94305-4125, USA Tel: + 1 650 736 0156; fax: + 1 650 725 3863; e-mail: feedback@pharmgkb.org
Investigating hydrodynamic cavitation as an efficient means for removal of per- and polyfluoroalkyl substances from solution

Shervin Kabiri,Mehdi Jafarian,Divina A. Navarro,Catherine P. Whitby,Michael J. McLaughlin

DOI: https://doi.org/10.1016/j.seppur.2024.127644

IF: 8.6

2024-04-28

Separation and Purification Technology

Abstract:With nearly five decades of per- and polyfluoroalkyl substances (PFASs) being associated with firefighting and industrial activities, these compounds inevitably accumulate in both ground and surface water. PFAS contamination in water has emerged as a significant environmental and public health concern, particularly perfluorooctanesulfonic acid (PFOS), which is often found in higher concentrations compared to other PFAS and has more pronounced adverse health effects. Addressing PFAS contamination requires treating large volumes of water, making technologies that rapidly separate and concentrate PFASs highly favoured. The strong surface activity of PFAS, such as PFOS, enables them to generate colloidal gas aphrons (CGAs) during high shear mixing of their aqueous solutions, where PFASs can be separated and collected as foam. This study aims to evaluate the effectiveness of high shear mixing in separating PFOS from solution, leveraging its accumulation at air–water interfaces. High shear-assisted PFOS separation was tested by varying parameters like rotational speed (4000 to 10,000 rpm), mixing time (30 s to 30 min), and the effect of electrolytes. Results showed greater PFOS separation in the presence of electrolytes, particularly monovalent cations like Na + , compared to divalent cations such as Ca 2+ , due to the creation of more stable CGAs with smaller sizes. At a mixing rate of 6000 rpm, 85 % of PFOS was removed in 30 s from a highly contaminated PFOS solution (10 mg/L), with over 95 % separation after 5 mixing cycles. While high-shear mixing was efficient in PFOS separation from highly contaminated solutions it was less efficient for low-level contaminated solutions (less than 1 mg/L). These results suggest that hydrodynamic cavitation induced by high-shear mixing seems promising for enhancing the separation of PFOS from heavily contaminated solutions. This technique could serve as a standalone method or be integrated with other PFAS removal technologies to enhance the overall efficiency of PFAS removal from polluted water sources.

engineering, chemical
Foam fractionation removal of multiple per‐ and polyfluoroalkyl substances from landfill leachate

Philip McCleaf,Ylva Kjellgren,Lutz Ahrens

DOI: https://doi.org/10.1002/aws2.1238

2021-09-01

AWWA Water Science

Abstract:Per- and polyfluoroalkyl substances (PFAS) are a common contaminant in municipal landfill leachate and are recognized as a pollutant on global scale. The present work examined foam fractionation (FF) in batch and continuous modes as an appropriate treatment technique for PFAS removal for the landfill leachate and found stable removal efficiency of greater than 90% for PFOA (C7), PFOS (C8), PFHxS (C6), and PFHpA (C6) and 6:2 FTSA (C6). For other PFAS such as PFNA (C8), PFPeS (C4), PFHxA (C5), PFHpS (C7), and PFBS (C4), a less stable removal between 80% and 50% was achieved while between 50% and 20% removal was observed for EtFOSAA (C8), PFBA (C3), PFDA (C9), FOSA (C8), PFPeA (C4), and MeFOSAA (C8). Increased air flowrate, addition of iron (III) oxide (Fe+3) coagulant, conductivity, and greater untreated leachate PFAS concentration were factors resulting in increased removal efficiency for the majority of PFAS. Article Impact StatementEfficient PFAS removal from landfill leachate using surface-active foam fractionation treatment with examination of key process parameters.
Efficient Removal of Perfluorooctane Sulfonate from Aqueous Film-Forming Foam Solution by Aeration-Foam Collection.

Pingping Meng,Shubo Deng,Ayiguli Maimaiti,Bin Wang,Jun Huang,Yujue Wang,Ian T. Cousins,Gang Yu

DOI: https://doi.org/10.1016/j.chemosphere.2018.03.183

IF: 8.8

2018-01-01

Chemosphere

Abstract:Aqueous film-forming foams (AFFFs) used in fire-fighting are one of the main contamination sources of perfluorooctane sulfonate (PFOS) to the subterranean environment, requiring high costs for remediation. In this study, a method that combined aeration and foam collection was presented to remove PFOS from a commercially available AFFF solution. The method utilized the strong surfactant properties of PFOS that cause it to be highly enriched at air-water interfaces. With an aeration flow rate of 75 mL/min, PFOS removal percent reached 96% after 2 h, and the PFOS concentration in the collected foam was up to 6.5 mmol/L, beneficial for PFOS recovery and reuse. Increasing the aeration flow rate, ionic strength and concentration of co-existing surfactant, as well as decreasing the initial PFOS concentration, increased the removal percents of PFOS by increasing the foam volume, but reduced the enrichment of PFOS in the foams. With the assistance of a co-existing hydrocarbon surfactant, PFOS removal percent was above 99.9% after aeration-foam collection for 2 h and the enrichment factor exceeded 8400. Aeration-foam collection was less effective for short-chain perfluoroalkyl substances due to their relatively lower surface activity. Aeration-foam collection was found to be effective for the removal of high concentrations of PFOS from AFFF-contaminated wastewater, and the concentrated PFOS in the collected foam can be reused.
Removal of per- and polyfluoroalkyl substances from wastewater via aerosol capture

Dung Nguyen,John Stults,Julie Devon,Eden Novak,Heather Lanza,Youn Choi,Linda Lee,Charles E. Schaefer

DOI: https://doi.org/10.1016/j.jhazmat.2024.133460

IF: 13.6

2024-01-12

Journal of Hazardous Materials

Abstract:The widespread use of per- and polyfluoroalkyl substances (PFAS)-containing products in numerous commercial and industrial applications has resulted in their occurrence in wastewater treatment plants (WWTPs). Herein, proof-of-concept bench-scale experiments were performed to measure the extent to which PFAS could be removed from a WWTP if aerosols generated during aeration were captured. Experiments were designed to mimic the aeration rate:water volume ratio, the water volume:surface area ratio, and aeration bubble size applicable to the full-scale aeration vessel. Results showed that substantial (75%) removal of perfluorooctane sulfonate (PFOS) was observed under these operating conditions in the bench-scale system; up to 97% PFOS removal was observed if the aeration rate was increased 3-fold. PFAS removal generally increased with increasing aerosol capture and with increasing PFAS surface activity. Analysis of semi-quantified PFAS showed that the semi-quantified PFAS accounted for approximately 93% of the identified PFAS in the raw wastewater, dominated largely by the presence of 2:2 fluorotelomer carboxylic acid (2:2 FTCA). This preliminary study suggests that aerosol capture in aeration basins has potential for mitigating PFAS in WWTPs. Further testing is needed to assess the feasibility of this approach at the field scale.

environmental sciences,engineering, environmental
Enhance electrocoagulation-flotation (ECF) removal efficiency perfluorohexanoic acid (PFHxA) by adding surfactants

Yueh-Feng Li,Chung-Yu Ho,Yu-Jung Liu,Yu-Chi Lee,Ching-Yao Hu,Shang-Lien Lo

DOI: https://doi.org/10.1016/j.jece.2023.111773

IF: 7.7

2024-01-06

Journal of Environmental Chemical Engineering

Abstract:This research focuses on the application of electrocoagulation-flotation (ECF) in the removal of perfluorooctanoic acid (PFHxA), a prevalent short-chain perfluoroalkyl substance in semiconductor manufacturing, especially at concentrations of industrial wastewater levels. We explored the effectiveness of ECF, which employs sacrificial electrodes to create metal ions and bubbles for pollution extraction. The study particularly examines the role of various surfactants in augmenting PFHxA removal. We observed that at an initial PFHxA concentration of 1 mM, both anionic and cationic surfactants modestly increased removal efficiency, with limited impact from electrostatic repulsion. Significantly, at a higher concentration of 5.0 mM, cationic surfactants, notably DTAB with its short carbon chain, markedly enhanced PFHxA elimination. The superior performance of DTAB is attributed to its facilitation in Al(OH)3 crystal formation, promoting PFHxA adsorption, efficient micelle or bubble formation with PFHxA, and the stability of resulting flocs. Our findings underscore the efficacy of DTAB as a surfactant in ECF for high-concentration PFHxA scenarios, emphasizing the importance of surfactant and electrode material selection in optimizing PFAS treatment in wastewater systems. This study contributes valuable insights into refining PFAS remediation strategies in real industrial wastewater applications.

engineering, chemical, environmental
Per- and polyfluoroalkyl substance (PFAS) removal from soil washing water by coagulation and flocculation

Michel Hubert,Thomas Meyn,Mona Cecilie Hansen,Sarah E Hale,Hans Peter H Arp,Sarah E. Hale,Hans Peter H. Arp

DOI: https://doi.org/10.1016/j.watres.2023.120888

IF: 12.8

2024-02-01

Water Research

Abstract:Soil washing is currently attracting attention as a promising remediation strategy for land contaminated with per- and polyfluoroalkyl substances (PFAS). In the soil washing process, the contaminant is transferred from the soil into the liquid phase, producing a PFAS contaminated process water. One way to treat such process water is to use coagulation and flocculation; however, few studies are available on the performance of coagulation and flocculation for removing PFAS from such process water. This study evaluated 6 coagulants and flocculants (polyaluminium chloride (PACl), zirconium oxychloride octahydrate, cationic and anionic polyacrylamide, Polyclay 685 and Perfluor Ad®), for the treatment of a proxy PFAS contaminated washing water, spiked with PFAS concentrations found at typical Aqueous Film Forming Foam (AFFF) contaminated sites. PFAS removal efficiencies (at constant pH) varied greatly depending on the coagulants and flocculants, as well as the dosage used and the targeted PFAS. All tested coagulants and flocculants reduced the turbidity by >95%, depending on the dosage. Perfluor Ad®, a specially designed coagulant, showed the highest removal efficiency for all longer chain (>99%) and shorter chain PFAS (>68%). The cationic polyacrylamide polymer removed longer chain PFAS up to an average of 80%, whereas average shorter chain PFAS removal was lower (<30%). The two metal-based coagulants tested, PACl and zirconium, removed longer chain PFAS by up to an average of 61% and shorter chain PFAS up to 48%. Polyclay 685, a mixture of powdered activated carbon (PAC) and aluminium sulphate, removed longer chain PFAS by 90% and shorter chain PFAS on average by 76%, when very high dosages of the coagulant were used (2,000 mg/L). PFAS removal efficiencies correlated with chain length and headgroup. Shorter chain PFAS removal was dependent on electrostatic interaction with the precipitating flocs, whereas for longer chain PFAS, hydrophobic interactions between apolar functional groups and flocs created by the coagulant/flocculant, dissolved organic matter and suspended solids played a major role. The results of this study showed that by selecting the most efficient coagulant and aqueous conditions, a greater amount of PFAS can be removed from process waters in soil washing facilities, and thus included as part of various treatment trains.

environmental sciences,engineering, environmental,water resources
Underlying Mechanisms for the Impacts of Molecular Structures and Water Chemistry on the Enrichment of Poly/perfluoroalkyl Substances in Aqueous Aerosol

Yao Li,Xiaoyong Yu,Xin Chen,Jun Yin,Wenjue Zhong,Lingyan Zhu

DOI: https://doi.org/10.1016/j.scitotenv.2021.150003

IF: 9.8

2021-01-01

The Science of The Total Environment

Abstract:Enrichment of ionic poly/perfluoroalkyl substances (PFASs) in aqueous aerosol (AA) is an important pathway for them to enter atmosphere. In this study, the enrichment behaviors of 12 legacy and emerging PFASs in AA in both single solute and mixed solutions were investigated. The enrichment factors (EF) displayed a general increasing trend with the fluorinated carbon chain length. For the first time, a robust Quantitative Structure-Property Relationship (QSPR) model coupled with partial least-square method was established with fifteen quantum chemical descriptors. Four molecular descriptors, including dipole moment (μ), molecular weight (MW), the maximal value of the molecular surface potential (Vs, max) and molecular volume (V) were identified as the key structural variables affecting the PFASs enrichment. Inorganic salts and humic acid (HA) which are common in seawater, facilitated the PFASs enrichment as a result of enhanced hydrophobicity and the bridging effect caused by divalent cations. The typical cationic and anionic surfactants, cetyltrimethylammonium bromide and sodium dodecyl sulfate, both inhibited the enrichment due to the competition between PFASs and surfactants. It is interesting that 6:2 chlorinated polyfluorinated ether sulfonate (F53B) had the highest EF among the 12 PFASs, implying its strong potential of atmosphere transport.
Plasma-assisted degradation of a short-chain perfluoroalkyl substance (PFAS): Perfluorobutane sulfonate (PFBS)

Osakpolo Isowamwen,Rui Li,Thomas Holsen,Selma Mededovic Thagard

DOI: https://doi.org/10.1016/j.jhazmat.2023.131691

IF: 13.6

2023-05-26

Journal of Hazardous Materials

Abstract:This study investigates the degradation of perfluorobutane sulfonate (PFBS), a chemical compound belonging to a group of per- and polyfluoroalkyl substances (PFAS), by gas-phase electrical discharge plasma. Plasma alone was ineffective in degrading PFBS due to its poor hydrophobicity, which inhibited the compound from accumulating at the plasma-liquid interface, the region of chemical reactivity. To overcome bulk liquid mass transport limitations, a surfactant, hexadecyltrimethylammonium bromide (CTAB), was introduced to interact with and transport PFBS to the plasma-liquid interface. In the presence of CTAB, ∼99% of PFBS was removed from the bulk liquid and concentrated at the interface, where 67% of the concentrate was degraded and 43% of that amount was defluorinated within one hour. PFBS degradation was further improved by optimizing the surfactant concentration and dosage. Experiments with a range of cationic, non-ionic, and anionic surfactants revealed that the PFAS-CTAB binding mechanism is predominantly electrostatic. A mechanistic understanding of the PFAS-CTAB complex formation, its transport to and destruction at the interface is proposed, alongside the chemical degradation scheme, which includes the identified degradation byproducts. This study shows that surfactant-assisted plasma treatment is one of the most promising techniques for destroying short-chain PFAS in contaminated water.

environmental sciences,engineering, environmental
Perfluorooctanoic acid (PFOA) removal by flotation with cationic surfactants

Yueh-Feng Li,Wei-Yi Chien,Yu-Jung Liu,Yu-Chi Lee,Shang-Lien Lo,Ching-Yao Hu

DOI: https://doi.org/10.1016/j.chemosphere.2020.128949

IF: 8.8

2021-03-01

Chemosphere

Abstract:Perfluorooctanoic acid (PFOA) was separated and recovered using a foam flotation process aided by cationic surfactants. The PFOA removal efficiency was in the following decreasing order: OTAB (C8TAB) > DTAB (C10TAB) > CTAB (C16TAB) > TBAB, which indicates that cationic surfactants with an alkyl chain that had a similar length to that of PFOA had higher affinities to PFOA. PFOA removal slightly decreased with increasing ionic strength of the surfactant but did not change with the pH. PFOA could be completely removed in 20 min with 1.25 mM of OTAB in actual wastewater. The energy yield value of foam flotation with a cationic surfactant was much higher than those of other methods, which means that using foam flotation with a cationic surfactant as the collector is a simple, fast, and energy-efficient method to separate and recover PFOA from dilute water solutions.

environmental sciences
Role of the Air-Water Interface in Removing Perfluoroalkyl Acids from Drinking Water by Activated Carbon Treatment.

Pingping Meng,Xiangzhe Jiang,Bin Wang,Jun Huang,Yujue Wang,Gang Yu,Ian T. Cousins,Shubo Deng

DOI: https://doi.org/10.1016/j.jhazmat.2019.121981

IF: 13.6

2019-01-01

Journal of Hazardous Materials

Abstract:Contamination of drinking water by per- and polyfluoroalkyl substances (PFASs) is a worldwide problem. In this study, we for the first time revealed the role of the air-water interface in enhancing the removal of long-chain perfluoroalkyl carboxylic (PFCAs; CnF2n+1COOH, n >= 7) and perfluoroalkane sulfonic (PFSAs; CnF2n+1SO3H, n >= 6) acids, collectively termed as perfluoroalkyl acids (PFAAs), through combined aeration and adsorption on two kinds of activated carbon (AC). Aeration was shown to enhance the removal of long-chain PFAAs through adsorption at the air-water interface and subsequent adsorption of PFAA-enriched air bubbles to the AC. The removal of selected long-chain PFAAs was increased by 50-115 % with the assistance of aeration, depending on the perfluoroalkyl chain length. Aeration is more effective in enhancing long-chain PFAA removal as air-water interface adsorption increases with PFAA chain length due to higher surface activity. After removing adsorbed air bubbles by centrifugation, up to 80 % of the long-chain PFAAs were able to desorb from the sorbent, confirming the contribution of the air-water interface to the adsorption of PFAAs on AC. Aeration during AC treatment of water could enhance the removal of long-chain PFAAs, and improve the performance of AC during water treatment.
Removal of perfluoroalkyl acids from aqueous media by surfactant-modified clinoptilolites

Monireh S. Hedayati,Nina Ricci Nicomel,Otman Abida,Loretta Y. Li

DOI: https://doi.org/10.1007/s11356-024-32194-4

IF: 5.8

2024-02-09

Environmental Science and Pollution Research

Abstract:Perfluoroalkyl and polyfluoroalkyl substances (PFASs) are environmentally persistent, bioaccumulating, and toxic compounds that have attracted global attention. It is challenging to reduce the residual concentrations of these compounds to safe discharge limits. In this study, batch experiments were performed to evaluate natural clinoptilolite and clinoptilolites modified (MC) with cetylpyridinium chloride (CPC-MC), didodecyldimethylammonium bromide (DDAB-MC), hexadecyltrimethylammonium bromide (HDTMA-MC), and tetramethylammonium chloride (TMA-MC) as cost-effective aqueous PFAS adsorbents. The removal capacities of the adsorbents for the majority of the PFASs decreased in the following order: DDAB-MC > CPC-MC ≫ modified natural clinoptilolite with hexadecyltrimethyl ammonium bromide (HDTMA-MC) ≫ modified natural clinoptilolite with tetramethylammonium chloride (TMA-MC) ≈ natural clinoptilolite modified with NaCl (NC). In particular, CPC-MC and DDAB-MC reduced PFASs concentration in 50 μg/L by up to 98% for perfluorooctane sulphonate. Within 30 min, CPC-MC (30.5 μg/L) and DDAB-MC (32.1 μg/L) met the PFOS water quality criterion of 36 μg/L in inland surface waters. Both adsorbents met this criterion at the highest solution volume (40 mL) and 0.125 g/L (solid-to-liquid ratio of 1:8). PFASs with short hydrocarbon chains competed more for adsorption. PFASs with sulphonate functional groups were also adsorbed more than carboxyl groups in single- and multi-PFAS solutions. The modified surfaces of clinoptilolites controlled PFAS adsorption through hydrophobic and electrostatic interactions. PFAS removal with surfactant-modified clinoptilolites is cost-effective and protects aquatic environments by using surplus natural materials.

environmental sciences
Adsorbability of a Wide Range of Per- and Polyfluoroalkyl Substances on Granular Activated Carbon, Ion Exchange Resin, and Surface Modified Clay

Bahareh Tajdini,Hooman Vatankhah,Ethan R. Pezoulas,Chuhui Zhang,Christopher P Higgins,Christopher Bellona

DOI: https://doi.org/10.1016/j.watres.2024.122774

IF: 12.8

2024-11-11

Water Research

Abstract:The increased detection of understudied per- and polyfluoroalkyl substances (PFAS) in environmental matrices has highlighted the need to evaluate the treatability of a wide-range of PFAS by sorption-based processes. This study investigated the efficacy of three commercial adsorbents (i.e., granular activated carbon (GAC), surface modified clay (SMC), and anionic exchange resin (AER)) for the removal of a wide range of cationic, zwitterionic, and anionic PFAS from an aqueous film forming foam (AFFF)-impacted groundwater employing rapid small-scale column tests (RSSCTs) coupled with high resolution mass spectrometry (HRMS) and suspect screening analysis (SQ). AER exhibited later breakthrough times for the majority of anionic and zwitterionic PFAS compared to SMC and GAC. However, both AER and SMC exhibited negligible removal of cationic PFAS presumably due to the reliance of these adsorbents on electrostatic interactions and the counteraction of hydrophobic forces caused by the repulsion between cationic PFAS and positively charged surfaces of AER and SMC. GAC, being a non-selective adsorbent, was largely unaffected by the ionic charge of the evaluated PFAS with molecular structure having a bigger impact on adsorbability. The detection of a variety of PFAS classes in the investigated AFFF-impacted groundwater enabled assessment of the relative impact of chemical structure on adsorptive removal of PFAS. Chain-length dependent adsorption was observed across all investigated anionic and zwitterionic PFAS classes. The PFAS structures possessing hydroxyl and/or methyl functional groups exhibited later breakthrough times compared to their homologues lacking these functional groups and cyclic/unsaturated structures were removed less efficiently compared to their linear/saturated homologues. In the case of perfluoroalkyl acid (PFAA)-derivative structures, hydrogen-substituted classes (i.e., H-PFAAs) were removed more efficiency than PFAAs while keto-substituted structures (i.e., K-PFSA) and pentahydrido-fluoroalkane sulfates (PeH-FAOS) exhibited lower adsorbability compared to PFAAs for all adsorbents. Oxa-PFAAs (O-PFSA; isomer class of PFA-OS) on the other hand demonstrated higher adsorbability compared to PFAAs in the case of AER-like adsorbents, while this trend was reversed for GAC.

environmental sciences,engineering, environmental,water resources
Efficient Separation of Per- and Polyfluoroalkyl Substances (PFAS) from Water by Aminated Polyacrylamide Hydrogel Foam

Yichen Xu,Xueru Yu,Xinhao Wang,Yiqian Song,Wenran Wang,Ming Zhang,Deyang Kong,Zhanghao Chen,Cheng Gu

DOI: https://doi.org/10.1016/j.cej.2024.157833

IF: 15.1

2024-01-01

Chemical Engineering Journal

Abstract:Emerging per- and polyfluoroalkyl substances (PFAS) are highly toxic chemicals with extraodinary stability in the aquatic environment. Highly efficient adsorbents are in urgent need to address the environmental challenges caused by PFAS. Herein, we developed a novel aminated foam adsorbent with high affinity for PFAS adsorption through polymerization, amination and pyrolyzation. For initial 1 μg/L perfluorooctanoic acid (PFOA) solution, more than 97.9 % removal efficiency could be obatined with a rapid equilibration time of ∼ 15 min. The elevated adsorption efficiency could be explained by the synergetic effect of electrostatic/hydrogen bonding and hydrophobic interaction, while the increase of specific surface area (SSA) also has a positive effect on PFOA adsorption. Furthermore, the sythesized polyacrylamide-polyaniline material (pyrolyzed at 301℃, PAM-PANI-2) exhibited high adaptability to different environmental influencing factors, including pH and co-existed organic matters, and presented excellent adsorption removal ability for other common PFAS except for PFOA. Moreover, it is worth noting that this foam material has advantages in regeneration compared to traditional powder adsorbents, without complicated procedures such as centrifugation and filtration. These results indicate that aminated PAM polymers are promising adsorbents in remediations of trace PFAS-contaminated water, which can give new insights to the design and application of novel polymer materials of PFAS treatments.

Effect of diabetes and time after in vivo insulin administration on ketogenesis and gluconeogenesis in isolated rat hepatocytes.

Silica gel-based monoliths prepared by the sol-gel method: facts and figures.

Surfactant-enhanced coagulation and flocculation improves the removal of perfluoroalkyl substances from surface water

Commercial‐scale removal of short‐chain PFAS in a batch‐wise adsorptive bubble separation process by dosing with cationic co‐surfactant

Removing per- and polyfluoroalkyl substances (PFAS) in water by foam fractionation

Impact of Salinity and Temperature on Removal of PFAS Species from Water by Aeration in the Absence of Additional Surfactants: A Novel Application of Green Chemistry Using Adsorptive Bubble Fractionation

Air-water Interfacial Properties of Perfluorosulfonic Acid Salts with Different Chain Lengths

PharmGKB summary: peginterferon-&agr; pathway

Investigating hydrodynamic cavitation as an efficient means for removal of per- and polyfluoroalkyl substances from solution

Foam fractionation removal of multiple per‐ and polyfluoroalkyl substances from landfill leachate

Efficient Removal of Perfluorooctane Sulfonate from Aqueous Film-Forming Foam Solution by Aeration-Foam Collection.

Removal of per- and polyfluoroalkyl substances from wastewater via aerosol capture

Enhance electrocoagulation-flotation (ECF) removal efficiency perfluorohexanoic acid (PFHxA) by adding surfactants

Per- and polyfluoroalkyl substance (PFAS) removal from soil washing water by coagulation and flocculation

Underlying Mechanisms for the Impacts of Molecular Structures and Water Chemistry on the Enrichment of Poly/perfluoroalkyl Substances in Aqueous Aerosol

Plasma-assisted degradation of a short-chain perfluoroalkyl substance (PFAS): Perfluorobutane sulfonate (PFBS)

Perfluorooctanoic acid (PFOA) removal by flotation with cationic surfactants

Role of the Air-Water Interface in Removing Perfluoroalkyl Acids from Drinking Water by Activated Carbon Treatment.

Removal of perfluoroalkyl acids from aqueous media by surfactant-modified clinoptilolites

Adsorbability of a Wide Range of Per- and Polyfluoroalkyl Substances on Granular Activated Carbon, Ion Exchange Resin, and Surface Modified Clay

Efficient Separation of Per- and Polyfluoroalkyl Substances (PFAS) from Water by Aminated Polyacrylamide Hydrogel Foam