Abstract:Background and Objectives: Rotational malformation after intramedullary nailing of intertrochanteric fractures is a relatively common, possibly severe, and difficult-to-detect complication, since intraoperative radiographic imaging allows for the assessment of the quality of reduction in the frontal and sagittal planes, but not in the transverse plane. The purpose of this study is to evaluate the rotational malalignment after intramedullary nailing of intertrochanteric fractures and to investigate a possible connection with specific patients' or fractures' characteristics. Materials and Methods: 74 patients treated with intramedullary nailing due to an intertrochanteric fracture underwent a postoperative CT of the pelvis-hips and knees. The value of the anteversion was measured both in the operated-on (angle 1) and in the healthy hip (angle 2) based on the technique described by Jeanmart et al. and the difference in anteversion (D angle = angle 1 minus angle 2) was calculated. A positive D angle indicated the presence of excessive internal overcorrection of the distal fragment during fracture reduction, while a negative D angle indicated the presence of excessive external overcorrection. The absolute value of the D angle represents the postoperative difference in anteversion between the two hips. The patients were divided into three groups according to this value: group A, with D < 5° (physiological difference); group B, with 5° < D < 15° (acceptable rotational alignment); and group C, with D ≥ 15° (rotational deformity). Results: Group A constitutes 56.8%, group B 12.2%, and group C 31.1% of the study population. Overall, 79.7% of the patients presented a positive angle D, while, for group C, the percentage was even higher at 91.3%. According to the AO/OTA classification system, 37.8% of the cases were stable fractures, 47.3% were unstable fractures, and 14.9% were reverse oblique fractures. Based on our analysis, the type of fracture has a serious impact on the rotational alignment, since the statistical significance of the mean angle D for the three types of fracture is reliable (p = 0.029). Stable fractures present the lowest anteversion difference values, while reverse oblique fractures present the highest difference. Conclusions: Our study reveals that the percentage of rotational malalignment after the intramedullary nailing of intertrochanteric fractures remains high (31.1%), despite the proper use of radiographic imaging during the intraoperative fracture reduction. In most cases (91.3%), this malalignment appears to be a matter of internal overcorrection. A clear correlation between hip's rotational deformity and patients' functional outcome has yet to be proven, and constitutes our objective in the near future.

Posterolateral wall integrity in reverse oblique intertrochanteric fracture fixation: A new perspective in evaluation

Biomechanical evaluation of ortho-bridge system and proximal femoral nail antirotation in intertrochanteric fractures with lateral wall fracture based on finite element analysis

Risk Factors for Implant Failure of Intertrochanteric Fractures with Lateral Femoral Wall Fracture after Intramedullary Nail Fixation.

Risk Factors for Failed Internal Fixation with Proximal Femoral Nail Antirotation for Reverse Intertrochanteric Hip Fractures

Design innovation and rationale of the intramedullary implants for treating Intertrochanteric fractures: A review.

Risk Factors for Implant Failure in Reverse Oblique and Transverse Intertrochanteric Fractures Treated with Proximal Femoral Nail Antirotation (PFNA)

A biomechanical comparison of three fixation techniques in osteoporotic reverse oblique intertrochanteric femur fracture with fragmented lateral cortex

Three different interlocking intramedullary nails for unstable reverse oblique inter-trochanteric fractures: a bio-mechanical comparative study

Loss of the Posteromedial Support: a Risk Factor for Implant Failure after Fixation of AO 31-A2 Intertrochanteric Fractures.

Residual lateral wall width predicts a high risk of mechanical complications in cephalomedullary nail fixation of intertrochanteric fractures: a retrospective cohort study with propensity score matching

The importance of intramedullary hip nail positioning during implantation for stable pertrochanteric fractures: biomechanical analysis

Incidence of Rotational Malalignment after Intertrochanteric Fracture Intramedullary Nailing: A CT-Based Prospective Study

Clinical study on the effect of intramedullary fixation and extramedullary fixation on unstable intertrochanteric fractures

Comparative study of a novel proximal femoral bionic nail and three conventional cephalomedullary nails for reverse obliquity intertrochanteric fractures: a finite element analysis

Biomechanical comparison of an intramedullary nail combined with a reconstruction plate combination versus a single intramedullary nail in unstable intertrochanteric fractures with lateral femoral wall fracture: A finite element analysis

Finite Element Analysis of Proximal Femur Bionic Nail (PFBN), Froximal Femoral Anti-rotation Intramedullary Nail and InterTan for Treatment of Reverse Obliquity Intertrochanteric Fractures

Influence of screw combination and nail materials in the stability of anterograde reamed intramedullary nail in distal femoral fractures

Failure analysis in proximal femoral nail antirotation fixation for intertrochanteric fractures

Medial support nail and proximal femoral nail antirotation in the treatment of reverse obliquity inter-trochanteric fractures (Arbeitsgemeinschaft fur Osteosynthesfrogen/Orthopedic Trauma Association 31-A3.1): a finite-element analysis

Biomechanical evaluation of a new intramedullary nail compared with proximal femoral nail antirotation and InterTAN for the management of femoral intertrochanteric fractures

Finite element analysis of fixation stability according to reduction position for internal fixation of intertrochanteric fractures