A–Z of Musculoskeletal and Trauma Radiology: Multiple myeloma

James R. D. Murray,E. Holmes,R. Misra

DOI: https://doi.org/10.1017/CBO9780511545429.029

Abstract:

What problem does this paper attempt to address?

A signal-off photoelectrochemical aptasensor for ultrasensitive 17β-estradiol detection based on rose-like CdS@C nanostructure and enzymatic amplification

Lian-Hong Tu,Jian-Hong Zhu,Aisyah-protonia Tanjung,Min Wang,Jinwei Kang,Ai-Jun Wang,Li-Ping Mei,Yadong Xue,Pei Song

DOI: https://doi.org/10.1007/s00604-022-05164-1

IF: 5.7

2022-01-10

Microchimica Acta

Abstract:Carbon-coated cadmium sulfide rose-like nanostructures (CdS@C NRs) were prepared via a facile solvothermal approach and used as the photoelectrochemical (PEC) sensing platform for the integration of functional biomolecules. Based on this, a novel “signal-off” PEC aptasensor mediated by enzymatic amplification was proposed for the sensitive and selective detection of 17β-estradiol (E2). In the presence of E2, alkaline phosphatase-modified aptamer (ALP-apta) were released from the electrode surface through the specific recognition with E2, which caused the negative effect on PEC response due to the decrease of ascorbic acid (AA) produced by the ALP in situ enzymatic catalysis. The developed PEC aptasensor for detection of E2 exhibited a wide linear range of 1.0–250 nM, with the low detection limit of 0.37 nM. This work provides novel insight into the design of potential phoelectroactive materials and the application of signal amplification strategy in environmental analysis field.Graphical abstract

chemistry, analytical
Ultrasensitive detection and application of estradiol based on nucleic acid aptamer and circulating amplification technology

Xufeng Hao,Yue Guan,Fei Liu,Yajun Zhang,Yijing Zhai,Lingmei Niu

DOI: https://doi.org/10.1016/j.jelechem.2022.116284

IF: 4.598

2022-05-01

Journal of Electroanalytical Chemistry

Abstract:It remains a vital task to establish ultrasensitive sensing interfaces for detection of estrogen to meet the demands of modern analysis, because steroidal estrogens have serious harm and interference effects on the endocrine function of humans and animals. Herein, a photoelectrochemical (PEC) platform for the highly sensitive determination of trace 17β-estradiol was developed based on CdTe-GO photosensitivity enhancement and cyclic technology signal amplification. Specifically, CdTe-GO was used as a photosensitive material to modify the screen-printed electrode (SPE) to obtain a stronger photocurrent, and then the cyclic amplification technology was introduced to significantly improve the photocurrent response. Under the optimal conditions, the as-prepared PEC aptasensor exhibited superb analytical performances for detection of E2 in the range from0.04-10pM with a detection limit of 0.01pM. The aptasensor showed significant selectivity and excellent reproducibility, which was attributed to the dual remarkable specific selection of aptamer and antibody for E2 and the high stability of the SPE. In addition, aptasensor had been successfully applied to determine E2 in royal jelly, milk powder and urine samples. Therefore, this article provides a new perspective for rapid, ultra-sensitive, and highly specific detection of E2.

chemistry, analytical,electrochemistry
Electrochemical aptasensor based on electrodeposited poly(3,4-ethylenedioxythiophene)-graphene oxide coupled with Au@Pt nanocrystals for the detection of 17β-estradiol

Zhi Zhao,Hao Chen,Ya Cheng,Ziyu Huang,Xianghong Wei,Jialu Feng,Jing Cheng,Samuel M. Mugo,Nicole Jaffrezic-Renault,Zhenzhong Guo

DOI: https://doi.org/10.1007/s00604-022-05274-w

IF: 5.7

2022-04-07

Microchimica Acta

Abstract:An electrochemical aptasensor is reported for the sensitive and specific monitoring of 17β-estradiol (E2) based on the modification of electrodeposited poly(3,4-ethylenedioxythiophene) (PEDOT)-graphene oxide (GO) coupled with Au@Pt nanocrystals (Au@Pt). With excellent conductivity, chemical stability and active sites, the PEDOT-GO nanocomposite film was firstly in situ polymerized on the glassy carbon electrode by cyclic voltammetry. Subsequently, one-step synthesized Au@Pt were decorated on the conductive polymer, providing a platform for immobilizing the aptamer and enhancing the detecting sensitivity. With the addition of E2, since the interfacial electron transfer process was retarded by the E2-aptamer complex, the differential pulse voltammetry signal decreased gradually. Under optimum conditions, the calibration curve of E2 exhibited a linear range between 0.1 pM and 1 nM, with a low detection limit (S/N = 3) of 0.08 pM. The developed aptasensor showed admiring selectivity, stability, and reproducibility. It was tested in human serum, lake water and tap water samples after low-cost and simple pretreatment. Consequently, the developed platform could provide a new design thought for ultrasensitive detection of E2 in clinical and environmental samples.

chemistry, analytical
Photoelectrochemical competitive immunosensor for 17β-estradiol detection based on ZnIn2S4@NH2-MIL-125(Ti) amplified by PDA NS/Mn:ZnCdS

Tao Yan,Tingting Wu,Shiyuan Wei,Haoqi Wang,Meng Sun,Liangguo Yan,Qin Wei,Huangxian Ju

DOI: https://doi.org/10.1016/j.bios.2019.111739

2020-01-15

Abstract:A competitive-type PEC immunosensor for 17β-estradiol (E2) detection was successfully fabricated using ZnIn2S4@NH2-MIL-125(Ti) composite as matrix. The excellent PEC behavior of ZnIn2S4@NH2-MIL-125(Ti) composite could be attributed to that the Ti4+-Ti3+ intervalence cycles in the titanium oxo-cluster of NH2-MIL-125(Ti) as well as the matching energy level between ZnIn2S4 and NH2-MIL-125(Ti) promote the migration and separation of photocarrier. Besides, polydopamine (PDA) with abundant amino- and quinone-groups was selected to further improve the PEC signals and capture antibody, which implement through the covalent bonding of PDA and BSA-E2 or carboxyl-group functionalized Mn:ZnCdS QDs in the competitive-type strategy. Concretely, the quinone functional groups in PDA film was applied to immobilize BSA-E2 through Michael reactions, and the PDA nanosphere loaded Mn:ZnCdS quantum dot (PDA NS/Mn:ZnCdS QDs) was used as antibodies' labels to amplify PEC signals. After PDA NS/Mn:ZnCdS-anti-E2 immobilized on the modified electrode, a remarkable increase of photocurrent signal was observed owing to the specific bonding of antigen and antibody. Based on the competitive binding of PDA NS/Mn:ZnCdS-anti-E2 with either free E2 or bovine serum albumin (BSA)-E2 causing the change of the photocurrent signal, the standard sample free E2 could be accuracy detect. Under optimal conditions, the competitive-type PEC immunosensor exhibited the linear range from 0.0005 ng/mL to 20 ng/mL and a limit detection of 0.3 pg/mL (S/N = 3). Meanwhile, the acceptable stability, selectivity and reproducibility of the proposed PEC immunosensing platform indicating the promising detection of small molecular environmental pollutants.
Self-powered Photoelectrochemical Aptasensor Based on AgInS2@Co/Ni-UiO-66@CDs Photoelectrode for Estradiosl Detection

Yuan Ruifang,Zhang Xue,Xue Xiaodong,Feng Rui,Zhao Yanxia,Sun Meng,Yan Liangguo,Yan Tao,Wei Qin

DOI: https://doi.org/10.1007/s00604-022-05409-z

IF: 5.7

2022-01-01

Microchimica Acta

Abstract:A self-powered photoelectrochemical (PEC) aptasensor was constructed to sensitively detect 17β-estradiol (E2). Firstly, a reasonable AgInS2@Co/Ni-UiO-66@Carbon Nanodots (CDs) photoelectrode with excellent photoelectrochemical performance was built by a simple two-step preparation method. The Co and Ni doping markedly improved the activity of UiO-66; the matched energy level of AgInS2 and Co/Ni-UiO-66 promoted the separation of electron–hole pairs, and the coupling of CDs further enhanced the conductivity and light utilization. Therefore, a steady anode-photocurrent signal output was obtained in 0.0 V bias voltage, providing a reliable photoelectric translating platform for assembling a self-powered PEC aptasensor. The E2-aptamer was adopted as a recognition unit to enhance the selectivity and sensitivity of the proposed aptasensor. The specific recognition reaction between E2 and aptamer administering to a raised photocurrent signal and the concentration of E2 was quantified by counting the fluctuation of the anode-photocurrent signal. The linear response range of the PEC aptasensor was 1.0 × 10−5–10 nmol/L, and the detection limit (S/N = 3) was lower than 3.0 fmol/L under optimal conditions. The fabricated aptasensor exhibited admirable selectivity, high sensitivity, rapid response, and wide linear range, demonstrating an extensive application prospect for environmental endocrine disruptor detection.
Folding Paper-Based Aptasensor Platform Coated with Novel Nanoassemblies for Instant and Highly Sensitive Detection of 17Β-Estradiol.

Tao Ming,Yang Wang,Jinping Luo,Juntao Liu,Shuai Sun,Yu Xing,Guihua Xiao,Hongyan Jin,Xinxia Cai

DOI: https://doi.org/10.1021/acssensors.9b01633

IF: 8.9

2019-01-01

ACS Sensors

Abstract:Owing to its critical role in the development of female reproductive tissues and as a clinical biomarker, there is an urgent need to develop a rapid and cost-effective method to sensitively detect 17 beta-estradiol (E2). In this work, a folding aptasensor platform with microfluidic channels for the label-free electrochemical detection of E2 is described. The platform, designed with a delicate folding structure, integrating filter holes, microfluidic channels, reaction chambers, and a three electrode system, is extremely easy to use. To increase the detection sensitivity and immobilize the aptamer, we synthesized a novel nanoassembly consisting of amine-functionalized single-walled carbon nanotube/new methylene blue/gold nanoparticles (AuNPs) and modified the working electrode with this nanoassembly. The calibration curve obtained from the experimental results exhibited a linear range between 10 pg mL(-1) and 500 ng mL(-1) (R-2 = 0.993), and a detection limit of 5 pg mL-1 was achieved (S/N = 3). Furthermore, experiments to detect E2 in clinical serum were conducted, and the results were highly similar to those obtained using a large electrochemical luminescence apparatus. By integrating multiple functional components, adopting novel nanoassemblies, and using a folding structure, this paper-based platform not only has great potential as a simple and convenient integrated device for point-of-care testing of E2, but also as a portable, low-cost, and highly sensitive aptasensor platform capable of detecting many diagnostic biomarkers with the appropriate aptamers.
Label-free and sensitive electrochemiluminescence aptasensor for the determination of 17β-estradiol based on a competitive assay with cDNA amplification

jingjing zhang,juntao cao,guifang shi,kejing huang,yanming liu,yonghong chen

DOI: https://doi.org/10.1039/c4ay01147c

IF: 3.1

2014-01-01

Analytical Methods

Abstract:A label-free competitive electrochemiluminescence (ECL) aptasensor for the determination of 17 beta-estradiol (E2) was developed based on the immobilization of thiol-capped E2 aptamers onto a gold electrode. A complementary DNA (cDNA) was designed to be used as a detection probe to bind with any unbound E2 aptamer. Tris(2,2'-bipyridyl)ruthenium(II) (Ru(bpy)(3)(2+)) was used as an ECL indicator and was electrostatically bound to the E2 aptamer; it competes with the cDNA for aptamer binding sites. With less E2, increased amounts of cDNA can bind to the E2 aptamer and adsorb more Ru(bpy)32+, greatly enhancing the ECL intensity. With more E2, the aptamer will capture E2 and bind less cDNA with an accompanying decrease in Ru(bpy)(3)(2+) and a decrease in ECL intensity. Thus, a competitive aptasensor based on the specific binding of the E2 aptamer to E2 and cDNA was achieved. The biosensor for E2 possesses a widely linear detection range from 0.01 to 10 nmol L-1 with a detection limit of 1.1 x 10(-12) mol L-1 (S/N = 3). The application of the present protocol was demonstrated by determining E2 in human serum, human urine, and tap water samples with recoveries of 89.8-100.0%, 90.0-103.5% and 89.5-95.0%, respectively. The proposed method provides a powerful tool for the rapid and sensitive detection of small molecules in biological and environmental samples.
An ultrasensitive dual-mode stagey for 17β-estradiol assay: Photoelectrochemical and colorimetric biosensor based on a WSe2/TiO2-modified electrode coupled with nucleic acid amplification

Licong Jia,Yipeng Wang,Meng Jiang,Wei Yuan,Yan Jin,Wen Yan,Xi Ze,Yuan Chen,Lingmei Niu

DOI: https://doi.org/10.1016/j.aca.2024.342966

2024-08-29

Abstract:Background: The abuse of 17β-estradiol(E2) has aroused wide concern in environmental and biomedical fields, which severely affects the endocrine function of human and animals. Therefore, an ultrasensitive and accurate assay of E2 is critically important. Traditional chromatography or immunoassay techniques exhibited good sensitivity and selectivity, but expensive instruments and antibodies may pose cost and stability issues, as well as difficulties in meeting on-site detection requirements. Ultrasensitive, reliable, and on-site detection of E2 at trace level remains a challenge. Hence, developing a simple, ultrasensitive assay to simultaneously achieve accurate detection and rapid visual analysis of E2 is extremely crucial. Results: We developed a versatile dual-mode photoelectrochemical (PEC) and colorimetric biosensor based on isothermal nucleic acid amplification strategy for the ultrasensitive and accurate detection of E2. The method modified titanium dioxide (TiO2) with tungsten selenide (WSe2) nanoflowers to synthesize WSe2/TiO2 heterostructures as a substrate for signal amplification and nanoprobe modification. Isothermal nucleic acid amplification strategy has been proven to be a powerful tool for strong signal amplification. The presence of a target triggered the nucleic acid amplification reaction, and produced a large amount of tDNA that competed with G-quadruplex immobilized on the electrode surface. The remaining G-quadruplex/hemin catalyzed the 4-chloro-1-naphthol (4-CN) to form biocatalytic precipitation (BCP) and ABTS-H2O2 chromogenic reaction, thus, the dual-mode platform was capable of achieving PEC-colorimetric ultrasensitive detection based on the catalytic activity of G-quadruplex/hemin DNAzyme. Within optimal conditions, the dual-mode biosensor exhibited a remarkable detection limit as low as 0.026 pM. Significance: Benefiting from the superior performance of WSe2/TiO2 and the power signal amplification of isothermal nucleic acid amplification strategy, this aptasensor achieved the ultrasensitive detection of E2. The independent transmission paths of photoelectrochemical and colorimetric provide mutual support and flexible switching, significantly enhancing the overall sensitivity and accuracy of the detection strategy, which can meet the needs for E2 precise quantification and rapid on-site detection.
A self-powered electrochemical aptasensor for detection of 17β-estradiol based on carbon nanocages/gold nanoparticles and DNA bioconjugate mediated biofuel cells

Yongju Wu,Dan Luo,Jinfei Yi,Rong Li,Dan Yang,Pengfei Pang,Hongbin Wang,Wenrong Yang,Yanli Zhang

DOI: https://doi.org/10.1039/d4an00085d

2024-03-17

The Analyst

Abstract:17β-Estradiol (E2) is an important endogenous estrogen, which disturbs the endocrine system and poses a threat to human health because of its accumulation in human body. Herein, a biofuel cells (BFCs)-based self-powered electrochemical aptasensor was developed for E2 detection. Porous carbon nanocages/gold nanoparticles composite modified indium tin oxide (CNCs/AuNPs/ITO) and glucose oxidase modified CNCs/AuNPs/ITO were used as biocathode and bioanode of BFCs, respectively. [Fe(CN)6]3− was selected as electroactive probe, which entrapped in the pores of positively charged magnetic Fe3O4 nanoparticles (PMNPs) and then capped with negatively charged E2 aptamer to form a DNA bioconjugate. The presence of the target E2 triggered the entrapped [Fe(CN)6]3− probe release due to the removal of the aptamer via specific recognition, which resulted in the transfer of electrons produced by glucose oxidation at the bioanode to the biocathode and produced a high open-circuit voltage (EOCV). Consequently, a "signal-on" homogeneous self-powered aptasensor for E2 assay was realized. Promisingly, the BFCs-based self-powered aptasensor has particularly high sensitivity for E2 detection in the concentration range of 0.5 pg mL−1 − 15 ng mL−1 with a detection limit of 0.16 pg mL−1 (S/N = 3). Therefore, the proposed BFCs-based self-powered electrochemical aptasensor has a great promise to be applied as a successful prototype of portable and on-site bioassay in the field of environment monitoring and food safety.

chemistry, analytical
Novel self-powered sandwich type Aptamer sensor for estrogen detection assisted with peroxidase mimic Cu-MOF

Kangping Ning,Zheng Wang,Honglan Qin,Maruf Ahmed,Seitkhan Azat,Xiaoya Hu,Qin Xu,Dandan Yang

DOI: https://doi.org/10.1016/j.foodchem.2024.140780

2024-08-05

Abstract:A novel self-powered and flexible enzymatic biofuel cell (EBFC)-based aptasensor was developed for the sensitive and selective detection of 17 β-estradiol (E2). A flexible polyvinyl alcohol (PVA)-tannic acid‑carbon nanotube/reduced graphene oxide (PTCR) substrate was modified with gold nanoparticles (AuNPs) and thiolated aptamer 1 (Apt1) to yield Apt1@AuNPs/PTCR. A copper-based metal-organic framework (Cu-MOF) with peroxidase mimicking activity was employed to anchor glucose oxidase (GOD) and Apt2, forming the Cu-MOF@GOD/Apt2 tag. When E2 was recognized by Apt1, the anchored E2 quantitatively recognized Cu-MOF@GOD/Apt2 to create a Cu-MOF@GOD/Apt2-E2-Apt1 sandwich structure for glucose oxidation to generate electrical power. Increased E2 concentrations enhanced Cu-MOF@GOD/Apt2 capture and amplified the electrical signal. The electrical power increased linearly as the E2 concentration increased from 1.0 pM to 1.0 nM. The sensor was successfully applied to various food samples and blood serum detection. This work promoted the application of novel self-powered biosensors for food safety analysis.
Aptamer-Based Optical Biosensor for Rapid and Sensitive Detection of 17Β-Estradiol in Water Samples

Nimet Yildirim,Feng Long,Ce Gao,Miao He,Han-Chang Shi,April Z. Gu

DOI: https://doi.org/10.1021/es203624w

IF: 11.4

2012-01-01

Environmental Science & Technology

Abstract:Required routine monitoring of endocrine disrupting compounds (EDCs) in water samples, as posed by EPA Unregulated Contaminant Regulation (UCMR3), demands for cost-effective, reliable and sensitive EDC detection methods. This study reports a reusable evanescent wave aptamer-based biosensor for rapid, sensitive and highly selective detection of 17β-estradiol, an EDC that is frequently detected in environmental water samples. In this system, the capture molecular, β-estradiol 6-(O-carboxy-methyl)oxime-BSA, was covalently immobilized onto the optical fiber sensor surface. With an indirect competitive detection mode, samples containing different concentrations of 17β-estradiol were premixed with a given concentration of fluorescence-labeled DNA aptamer, which highly specifically binds to 17β-estradiol. Then, the sample mixture is pumped to the sensor surface, and a higher concentration of 17β-estradiol leads to less fluorescence-labeled DNA aptamer bound to the sensor surface and thus to lower fluorescence signal. The dose-response curve of 17β-estradiol was established and a detection limit was determined as 2.1 nM (0.6 ng mL(-1)). The high specificity and selectivity of the sensor were demonstrated by evaluating its response to a number of potentially interfering EDCs. Potential interference of real environmental sample matrix was assessed by spiked samples in several tertiary wastewater effluents. The sensor can be regenerated with a 0.5% SDS solution (pH 1.9) over tens of times without significant deterioration of the sensor performance. This portable sensor system can be potentially applied for on-site real-time inexpensive and easy-to-use monitoring of 17β-estradiol in environmental samples such as effluents or water bodies.
Fluorescence and colorimetric analysis of β-estradiol based on aptamer assembled spherical nucleic acids

Leyuan Chen,Aijiao Yuan,Dapeng Zhang,Wenjing Xie,Hanyong Peng

DOI: https://doi.org/10.1039/d4ay01283f

IF: 3.1

2024-08-28

Analytical Methods

Abstract:Detecting β-estradiol (E2) in environmental monitoring is a complex task due to its status as a significant environmental contaminant. The detection methods require precision, sensitivity, and the ability to be conducted on-site without expensive instrumentation. Herein, we developed a novel approach using E2 aptamer assembled spherical nucleic acids (SNAs), which combines the sensitivity of fluorescence and the simplicity of colorimetry. Initially, a fluorescein (FAM)-labeled DNA aptamer is attached to the surface of gold nanoparticles (AuNPs) through hybridization with thiol-labeled DNA, resulting in fluorescence quenching. However, when E2 is present, the aptamer specifically binds to it, displacing from the thiol-DNA and releasing from the AuNP's surface. This leads to the recovery of fluorescence, allowing for quantitative detection of E2 by measuring the increase in fluorescence signal. Additionally, E2 detection can also be achieved visually using ultraviolet light. For colorimetric analysis, we introduce another set of AuNPs modified with thiol-DNA complementary to the DNA remaining on the surface of the previous AuNPs. When E2 triggers the release of the aptamer, the DNA on both AuNPs hybridized to each other, causing the aggregation of AuNPs and resulting in a distinct color change from red to purple. The detection limits for fluorescence and colorimetric analyses are 1 nM and 5 nM, respectively. We successfully applied this biosensing strategy to determine E2 concentrations in tap water and serum samples. Furthermore, our assay exhibits high selectivity towards E2 over other estrogens. Overall, this innovative approach provides an effective and versatile method for convenient on-site monitoring of E2.

spectroscopy,chemistry, analytical,food science & technology
Competitive ECL immunosensor for ultrasensitive 17β-estradiol detection based on synergistic promotion strategy using CdSe–ZnSe nanocomposites

Romana Manzoor,Aniqa Sehrish,Huan Wang,Ren Xiang,Yuyang Li,Dan Wu,Qin Wei

DOI: https://doi.org/10.1016/j.talanta.2023.125160

IF: 6.1

2023-09-06

Talanta

Abstract:A novel competitive ECL immunosensor for detection of 17β-Estradiol (E2) has been fabricated successfully. CdSe–ZnSe nanocomposites (CdSe–ZnSe NCs) with high catalytic properties, large surface area and good conductivity were used synergistically as the ECL nanocarriers of Pt nanoparticles (PtNPs). The ECL intensity of CdSe–ZnSe NCs increased and stabilized with luminol-PtNPs (luminol-PtNPs@CdSe–ZnSe NCs) because of electron transfer. To achieve the successful assembling of competitive ultrasensitive ECL immunosensor with high sensitivity and synergistic effect, Ag@TiO 2 core-shell was introduced as label. Ag@TiO 2 acted as a signal amplifier and also exhibited the high catalytic activity towards H 2 O 2 . This firmly anchored the E2 Antigen with covalent bond and converted the longer wavelength radiations to shorter wavelength. Under optimized conditions, our proposed strategy quantify the selective and reliable analysis of E2 with detection limit of 2.51 fg/mL (S/N = 3) within the linear range of 0.0001–30 ng/mL. The assembled synergistic strategy-based ECL immunosensor manifested the promising sensitivity, selectability along with high level of repeatability. Thus, the fabricated ECL immunosensor has potential valuable application for E2 detection along with many other environmental pollutants.

chemistry, analytical
Dual-Mode Sensing Platform Guided by Intramolecular Electrochemiluminescence of a Ruthenium Complex and Cationic N , N -Bis(2-(trimethylammonium iodide)propylene) Perylene-3,4,9,10-tetracarboxydiimide for Estradiol Assay

Jingwei Xue,Qinqin Zhao,Lei Yang,Hongmin Ma,Dan Wu,Lei Liu,Xiang Ren,Huangxian Ju,Qin Wei

DOI: https://doi.org/10.1021/acs.analchem.0c04563

IF: 7.4

2021-04-07

Analytical Chemistry

Abstract:Herein, a dual-mode sensing platform using cationic N,N-bis(2-(trimethylammonium iodide)propylene)perylene-3,4,9,10-tetracarboxydiimide (PDA+)-assembled DNA strands as a quencher was suggested for estradiol (E2) detection. The aptamer chain was initially anchored with the Ru(II) novel molecule (Ru complex), which was recombined with carbohydrazide (CON4H6) and tris(4,4'-dicarboxylicacid-2,2'-bipyridyl)ruthenium(II) dichloride [Ru(dcbpy)32+] modified on copper oxide (CuO) nanospheres. Intramolecular electrochemiluminescence (ECL) occurring between CON4H6 and Ru(dcbpy)32+ effectively improved the reaction rate and increased the ECL efficiency. By employing effective van der Waals' force, PDA+ was endowed with an efficient ECL quenching probe on an electrode. The signal on the ECL interface can be converted into quenching because of energy transfer between the intercalator and the emitter. Notably, cationic PDA+ possessing a large planar π-π skeleton improved advantageous activity of redox and DNA aptamer indurative loading capacity and directly generated a well-defined cathodic peak to execute the EC bio-detection. This method not only avoids the difficulty of assembling various signal indicators but also improves the sensitivity greatly using the quenching mechanism. In addition, disparate double-response signals coming from different principles of transduction are in a position to verify each other to improve the accuracy. Hence, examination areas of 0.001-100 nM with E2 for ECL and EC were obtained, supplying a novel sensing strategy with promising ideas and perspectives of detection platform construction.

chemistry, analytical
Electrochemical Integrated Paper-Based Immunosensor Modified with Multi-Walled Carbon Nanotubes Nanocomposites for Point-of-care Testing of 17Β-Estradiol.

Yang Wang,Jinping Luo,Juntao Liu,Xinrong Li,Zhuang Kong,Hongyan Jin,Xinxia Cai

DOI: https://doi.org/10.1016/j.bios.2018.02.012

2018-01-01

Abstract:17β-estradiol (17β-E2) plays a critical role in regulating reproduction in human, there is therefore an urgent need to detect it sensitively and precisely in a cost-effective and easy method. In this paper, a label-free integrated microfluidic paper-based analytical device was developed for highly sensitive electrochemical detection of 17β-E2. The microfluidic channel of the paper-based sensor was fabricated with wax printing and the three electrodes, including working, counter and reference electrode were screen-printed. Multi-walled carbon nanotubes (MWCNTs)/ thionine (THI)/ gold nanoparticles (AuNPs) Nano composites were synthesized and coated on screen-printed working electrode (SPWE) for the immobilization of anti-E2. In this electro-chemical system of paper-based immunoassay, THI molecules serving as an electrochemical mediator while MWCNTs and AuNPs, due to their excellent electrical conductivities, could accelerate electron transfer for the signal amplification. Experimental results revealed that the immunoassay is able to detect 17β-E2 as low as 10 pg mL-1, with a linear range from 0.01 to 100 ng mL-1. This microfluidic paper-based immunosensor would provide a new platform for low cost, sensitive, specific, and point-of-care diagnosis of 17β-E2.
Enzymatic biofuel cells-based self-powered electrochemical biosensor for detection of 17β-estradiol based on dual-enzyme cascade amplification and bioconjugate

Jinfei Yi,Dan Luo,Hua Meng,Yongju Wu,Lihong Ma,Yanli Zhang,Hongbin Wang,Wenrong Yang,Pengfei Pang

DOI: https://doi.org/10.1016/j.snb.2024.136269

IF: 9.221

2024-07-15

Sensors and Actuators B Chemical

Abstract:Self-powered electrochemical biosensors (SPEB) based on enzymatic biofuel cells (EBFC) have garnered significant attention due to their distinctive characteristic of not necessitating the source of external power supply. This study developed a novel EBFC-based SPEB by incorporating dual-enzyme cascade amplification and bioconjugate for extremely precise detection of 17β-estradiol (E2). The carbon nanocages/gold nanoparticles composite was employed as substrate to immobilize bilirubin oxidase (BOD) and complementary ssDNA (csDNA) to form bioconjugate. The carbon nanotubes/gold nanoparticles composite was used in the EBFC device as the electrode material, through which glucose oxidase (GOD) and E2 aptamer were wired to form the bioanode and biocathode, respectively. The biocathode further linked with bioconjugate via a hybridization reaction between E2 aptamer and csDNA. The bioconjugate integrates the recognition and signal probes for homogeneous electrochemical assay of targets, which released from biocathode once the target E2 was recognized and hindered the transfer of electrons produced by GOD on bioanode. Thus, the open-circuit voltage ( E OCV ) of the EBFC-based SPEB dramatically decreased, exhibiting exceptional sensitivity for the detection of E2 over a concentration range from 10 pg mL −1 to 20 ng mL −1 , with a detection limit of 3.3 pg mL −1 ( S/N = 3). Furthermore, the prepared EBFC-based SPEB showed significant potential for implementation as a viable prototype for a mobile and an on-site bioassay system in food and environmental safety applications.

chemistry, analytical,electrochemistry,instruments & instrumentation
Design and Validation of a Short Novel Estradiol Aptamer and Exploration of Its Application in Sensor Technology

Hongyan Jin,Yan Cheng,Fanli Kong,He Huang,Zhenjun Yang,Xinyi Wang,Xinxia Cai,Jinping Luo,Tao Ming

DOI: https://doi.org/10.3390/molecules29020535

2024-01-01

Abstract:The specific and sensitive detection of 17β-estradiol (E2) is critical for diagnosing and treating numerous diseases, and aptamers have emerged as promising recognition probes for developing detection platforms. However, traditional long-sequence E2 aptamers have demonstrated limited clinical performance due to redundant structures that can affect their stability and recognition ability. There is thus an urgent need to further optimize the structure of the aptamer to build an effective detection platform for E2. In this work, we have designed a novel short aptamer that retains the key binding structure of traditional aptamers to E2 while eliminating the redundant structures. The proposed aptamer was evaluated for its binding properties using microscale thermophoresis, a gold nanoparticle-based colorimetric method, and electrochemical assays. Our results demonstrate that the proposed aptamer has excellent specific recognition ability for E2 and a high affinity with a dissociation constant of 92 nM. Moreover, the aptamer shows great potential as a recognition probe for constructing a highly specific and sensitive clinical estradiol detection platform. The aptamer-based electrochemical sensor enabled the detection of E2 with a linear range between 5 pg mL–1 and 10 ng mL–1 (R2 = 0.973), and the detection capability of a definite low concentration level was 5 pg mL–1 (S/N = 3). Overall, this novel aptamer holds great promise as a valuable tool for future studies on the role of E2 in various physiological and pathological processes and for developing sensitive and specific diagnostic assays for E2 detection in clinical applications.
Optical-fiber sensor for 17β-Estradiol-binding aptamer evaluation and specific detection of 17β-Estradiol in serum at physiological concentrations

Shang Ren,Yanqi Feng,Yi Zhang,Yulin Liu,Jiaxing Zhao,Xiaoqi Li,Jinming Li,Haijing Jia,Zhongfeng Li,Xinhui Lou

DOI: https://doi.org/10.1016/j.talanta.2024.127320

IF: 6.1

2024-12-07

Talanta

Abstract:Methods for evaluation of immobilized-small molecule-binding aptamers are rare. In this study, taking the evaluation of 17β-Estradiol (E2) aptamers as an example, we first summarized the reported affinity and specificity results of 16 E2 aptamers, highlighting the issues of insufficient and inconsistent results and the lacking of evaluation of immobilized aptamers. We further exemplified the limited application scope of current affinity techniques by testing the two most widely-applied E2 aptamers, Kim76 and Alsa35, using the three label-free fluorescence assays and two nuclease protection assays. Subsequently, we evaluated the affinity of immobilized-E2 aptamers, Alsa35 and E09, using fiber optic evanescent wave aptasensor (FOEW) based on the competitive binding of target and fluorophore-labeled complementary strand with the fiber surface immobilized-aptamer. The results revealed that Alsa35 had the better affinity and specificity than E09. Using Alsa35-based FOEW, the enzyme-free detection of E2 spiked in river water and human serum was respectively realized with the unprecedented limits of detection (LOD, S/N = 3) of 4.75 (undiluted river water) and 206 pM (undiluted serum). FOEW is a valuable addition to analytical approaches for evaluation of immobilized-aptamers and a general platform for ultrasensitive target detection.

chemistry, analytical
Electrochemical aptasensor utilizing pulsed-electrodeposition of MXene film for estradiol detection

Seonki Min,Daegwon Noh,Eunsoon Oh

DOI: https://doi.org/10.1007/s40042-024-01006-w

2024-02-21

Journal of the Korean Physical Society

Abstract:Detection of endocrine disrupting chemicals is important for human and animal safety. 17β-estradiol (E2) is a female hormone, which may affect premature puberty. Milk, or certain medicines contain E2 hormone, and various E2 sensors have been developed. We investigated an electrochemical sensor that utilizes aptamers to detect the E2 hormone. For an active layer of the aptasensor, we deposited a Ti 3 C 2 T x MXene film using pulsed-electrodeposition (PED) on an ITO substrate. An XRD pattern of the PED-MXene film indicated that it was preferentially aligned along (002) direction. We compared electrochemical sensing performance of the PED-MXene aptasensor with an aptasensor without MXene. Before we immobilized E2-binding aptamers, the electrode surfaces were modified with carboxyl groups (-COOH) using succinic anhydride. After the surface modification, we immobilized the E2-binding aptamer on the electrode surfaces via EDC/NHS reaction. We observed a significant improvement in the sensitivity utilizing the MXene electrode, and we were able to successfully detect E2 below 1 pM concentration.

physics, multidisciplinary
Electrochemical Sensor Based on Molecularly Imprinted Membranes at Platinum Nanoparticles-Modified Electrode for Determination of 17Β-Estradiol.

Lihua Yuan,Jun Zhang,Ping Zhou,Jiaxing Chen,Ruoyu Wang,Tingting Wen,Yun Li,Xuemin Zhou,Huijun Jiang

DOI: https://doi.org/10.1016/j.bios.2011.07.058

IF: 12.545

2011-01-01

Biosensors and Bioelectronics

Abstract:In this paper, an electrochemical sensor for 17β-estradiol (E2) based on the molecular imprinting polymer (MIP) membranes had been constructed. 6-mercaptonicotinic acid (MNA) and E2 were first assembled on the surface of platinum nanoparticles-modified glassy carbon electrode (PtNPs/GCE) by the formation of Pt–S bonds and hydrogen-bonding interactions, and subsequently the polymer membranes were formed by electropolymerization. Finally, a novel molecularly imprinted sensor (MIS) was obtained after removal of E2. Experimental parameters such as deposition time, scan cycles, pH value and accumulation condition were optimized. Under optimal conditions, the MIS exhibited a large adsorption capacity and high selectivity. A good linearity was obtained in the range of 3.0×10−8–5.0×10−5molL−1 (r=0.996) with an estimated detection limit of 1.6×10−8molL−1. MIS had been successfully used to analyze E2 in water samples without complex pretreatment. Meanwhile, the average recoveries were higher than 93.9% with RSD<3.7%. All results above reveal that MIS is an effective electrochemical technique to determine E2 real-time in complicated matrix.

A–Z of Musculoskeletal and Trauma Radiology: Multiple myeloma

A signal-off photoelectrochemical aptasensor for ultrasensitive 17β-estradiol detection based on rose-like CdS@C nanostructure and enzymatic amplification

Ultrasensitive detection and application of estradiol based on nucleic acid aptamer and circulating amplification technology

Electrochemical aptasensor based on electrodeposited poly(3,4-ethylenedioxythiophene)-graphene oxide coupled with Au@Pt nanocrystals for the detection of 17β-estradiol

Photoelectrochemical competitive immunosensor for 17β-estradiol detection based on ZnIn2S4@NH2-MIL-125(Ti) amplified by PDA NS/Mn:ZnCdS

Self-powered Photoelectrochemical Aptasensor Based on AgInS2@Co/Ni-UiO-66@CDs Photoelectrode for Estradiosl Detection

Folding Paper-Based Aptasensor Platform Coated with Novel Nanoassemblies for Instant and Highly Sensitive Detection of 17Β-Estradiol.

Label-free and sensitive electrochemiluminescence aptasensor for the determination of 17β-estradiol based on a competitive assay with cDNA amplification

An ultrasensitive dual-mode stagey for 17β-estradiol assay: Photoelectrochemical and colorimetric biosensor based on a WSe2/TiO2-modified electrode coupled with nucleic acid amplification

A self-powered electrochemical aptasensor for detection of 17β-estradiol based on carbon nanocages/gold nanoparticles and DNA bioconjugate mediated biofuel cells

Novel self-powered sandwich type Aptamer sensor for estrogen detection assisted with peroxidase mimic Cu-MOF

Aptamer-Based Optical Biosensor for Rapid and Sensitive Detection of 17Β-Estradiol in Water Samples

Fluorescence and colorimetric analysis of β-estradiol based on aptamer assembled spherical nucleic acids

Competitive ECL immunosensor for ultrasensitive 17β-estradiol detection based on synergistic promotion strategy using CdSe–ZnSe nanocomposites

Dual-Mode Sensing Platform Guided by Intramolecular Electrochemiluminescence of a Ruthenium Complex and Cationic N , N -Bis(2-(trimethylammonium iodide)propylene) Perylene-3,4,9,10-tetracarboxydiimide for Estradiol Assay

Electrochemical Integrated Paper-Based Immunosensor Modified with Multi-Walled Carbon Nanotubes Nanocomposites for Point-of-care Testing of 17Β-Estradiol.

Enzymatic biofuel cells-based self-powered electrochemical biosensor for detection of 17β-estradiol based on dual-enzyme cascade amplification and bioconjugate

Design and Validation of a Short Novel Estradiol Aptamer and Exploration of Its Application in Sensor Technology

Optical-fiber sensor for 17β-Estradiol-binding aptamer evaluation and specific detection of 17β-Estradiol in serum at physiological concentrations

Electrochemical aptasensor utilizing pulsed-electrodeposition of MXene film for estradiol detection

Electrochemical Sensor Based on Molecularly Imprinted Membranes at Platinum Nanoparticles-Modified Electrode for Determination of 17Β-Estradiol.