Investigations on saturable absorption characteristic of PdS 2 and its application to high-peak-power sub-nanosecond intracavity OPO
Chao Han,Hongwei Chu,Tianli Feng,Shengzhi Zhao,Dechun Li,Jia Zhao,Weiping Huang
DOI: https://doi.org/10.1016/j.optmat.2024.115689
IF: 3.754
2024-06-17
Optical Materials
Abstract:In this work, a unique pentagonal TMD material, palladium disulfide (PdS 2 ) nanosheets were fabricated by the liquid-phase exfoliation (LPE) process, and the physical characteristics were also investigated. The nonlinear transmittance is measured by the power scanning method and the modulation depth is fitted to be 15.3%. Based on the transmittance curve, the saturable absorption parameters of PdS 2 are calculated, including 5.85 × 10 −19 cm 2 ground-state absorption cross-section, 1.63 × 10 −19 cm 2 excited-state absorption cross-section, and 683.5 μs excited-state lifetime. By employing both PdS 2 as a saturable absorber (SA) and an acousto-optic modulator (AOM), a doubly Q-switched and mode-locked (QML) laser-pumped intracavity KTiOPO4 (KTP) optical parametric oscillator (OPO) was realized. The pulse energy and the pulse width of the Q-switched envelope for signal wave have been measured. At higher pump power, the high-peak-power low-repetition-rate sub-nanosecond mode-locking pulse of signal wave is generated, in which there is only one mode-locked pulse underneath a Q-switched envelope. The measured shortest signal pulse duration is 530 ps, corresponding to a peak power of 337 kW, at an incident pump power of 9.81 W and an acousto-optic modulator (AOM) repetition rate of 1 kHz. In addition, by considering the Gauss distribution of intracavity photon density, a set of coupled rate equations for a doubly QML laser-pumped intracavity OPO was given and the numerical simulations agreed with the experimental results. These results indicate that PdS 2 is a promising nonlinear optical material for optical applications in the near-infrared (NIR) region.
materials science, multidisciplinary,optics