Psychological predictors of weight loss after bariatric surgery: a review of the recent research.

C. L. Wimmelmann,F. Dela,Erik Lykke Mortensen

DOI: https://doi.org/10.1016/j.orcp.2013.09.003

2014-07-01

Abstract:

What problem does this paper attempt to address?

Design Intervention for Sole Cutting Operation in Hand-Sewn Kolhapuri Footwear Manufacturing in India

Ganesh S. Jadhav,M. Arunachalam,Urmi R. Salve,Suman Devadula,Hemant K. Shete,Sandeep A. Thorat

DOI: https://doi.org/10.1007/s40032-022-00844-6

2022-06-20

Journal of The Institution of Engineers (India): Series C

Abstract:Handcrafted footwear is a vital segment of leather industries worldwide. Among all handcrafted footwear, Kolhapuri handcrafted footwear is notable for its craft and design in India. This article presents design intervention in hand-sewn footwear of Kolhapur, India, to improve the well-being (in terms of better posture, and force exertion) of artisans and productivity (in terms of reduced time of task/work). Observations on field indicate that the sole (base and heel) cutting operation requires considerable manual effort and time. This motivated this study on the need for a design intervention to reduce/eliminate manual effort required in Kolhapuri footwear manufacturing without affecting craftsmanship. Evaluation of manual sole-cutting activity was performed using production and ergonomics techniques (i.e. task-time, two-handed process chart, posture and force exertion). Based on this identification of most felt needs, a novel design for Sole-cutting machine is conceptualized, developed and evaluated using production and ergonomics techniques. The evaluation of design intervention indicated its effectiveness in sole-cutting operations. This novel footwear Sole-cutting machine mounted as a workstations satisfy the ergonomics characteristics and end-user requirements of artisans, thereby improving their well-being.
Managing ergonomic risk assessment among assembly operators in the small‐scale fabrication sector

Nor Izliana Mohd Nizan,Nina Fatma Ali,Siti Aslina Hussain

DOI: https://doi.org/10.1002/prs.12585

2024-02-06

Process Safety Progress

Abstract:In the small‐scale fabrication sector, employee health and safety are the most important aspects for improving productivity and quality. There is a lack of risk assessment and limited information on human handling and ergonomic approaches in the working environment of the small‐scale fabrication sector. This study aims to analyze the association of human handling risk factors with work‐related musculoskeletal disorder (WMSD) symptoms among assembly operators and to evaluate the proposed ergonomic intervention for a high‐risk work task using ergonomic risk assessment tools such as Rapid Upper Limb Assessment (RULA) and Rapid Entire Body Assessment (REBA). A questionnaire survey and observation were conducted across seven work categories. The analysis using RULA and REBA revealed that cleaning, fitting, and assembling have a high‐risk level that requires ergonomic intervention. The virtual design of the proposed ergonomic workstation for high‐risk work tasks was created using CATIA software and evaluated using RULA and REBA analyses. Job and organizational factors were found to be the main contributors to WMSD, while individual factors, awareness levels, and ergonomic risk assessment had insignificant effects on WMSD. Based on RULA and REBA scores, the proposed ergonomic intervention significantly reduces risk by 30%–47%, improving overall health and safety for operators in diverse work activities.

engineering, chemical
Practical lean for physician leaders.

D. Joshi

2013-07-01

Abstract:
Tyrosine-Specific Chemical Modification with in Situ Hemin-Activated Luminol Derivatives.

Shinichi Sato,Kosuke Nakamura,Hiroyuki Nakamura

DOI: https://doi.org/10.1021/acschembio.5b00440

IF: 4.634

2015-09-18

ACS Chemical Biology

Abstract:Tyrosine-specific chemical modification was achieved using in situ hemin-activated luminol derivatives. Tyrosine residues in peptide and protein were modified effectively with N-methylated luminol derivatives under oxidative conditions in the presence of hemin and H2O2. Both single and double modifications of the tyrosine residue occurred in the reaction of angiotensin II with N-methylated luminol derivative 9. Tyrosine-specific chemical modification of the model protein bovine serum albumin (BSA) revealed that the surface-exposed tyrosine residues were selectively modified with 9. We succeeded in the functionalization of several proteins using azide-conjugated compound 18 using alkyne-conjugated probes by copper(I)-catalyzed azide-alkyne cycloaddition (CuAAC) or dibenzocyclooctyne (DBCO)-mediated copper-free click chemistry. This tyrosine-specific modification was orthogonal to conventional lysine modification by N-hydroxysuccinimide (NHS) ester, and dual functionalization by fluorescence modification of tyrosine residues and PEG modification of lysine residues was achieved without affecting the modification efficiency.
Ergonomics and efficient workplace design for hand-sewn footwear artisans in Kolhapur, India

Ganesh Suresh Jadhav,M Arunachalam,Urmi Ravindra Salve

DOI: https://doi.org/10.3233/WOR-203230

Work

Abstract:Background: The footwear manufacturing industry is one of the significant sectors of leather businesses in India. In the Indian footwear production industry, there is an enormous potential for employment, export, and development. Kolhapuri footwear is a popular handmade craft in India. It is a well-designed craft used by Indian people for many years. Artisans using traditional tools manufacture this footwear manually. Workers of this craft use traditional methods and work in cottage-based enterprises where organized laws and legislations are not applicable. Therefore, any occupational hazard-related documentation is not available. Due to the nature of the job, workers occupy various apparent non-optimal postures that may cause multiple work-related disorders such as musculoskeletal disorders (MSDs). Objective: The main objective was to study and assess different footwear manufacturing workstations and working postures. The work further aimed to improve the design of current workstations and evaluate the proposed design using virtual ergonomic assessment techniques. Methods: An anthropometric database for the Kolhapuri footwear making population was developed. This work measured 35 different body dimensions of the footwear manufacturing artisans. Rapid Upper Limb Assessment (RULA) was used for postural analysis of the artisans. Results: It was observed that the entire footwear making activity was carried out in awkward postures. RULA scores suggested that 'a change in posture' to improve the efficiency of artisans was required for most of the workstations. This work proposed a novel workstation design to reduce the high risk of MSDs. The design was evaluated for thigh clearance, vision analysis and RULA analysis with the help of Digital Human Modelling (DHM). The virtual ergonomics assessment of this design revealed that the vision, thigh clearances, and RULA scores were satisfactory in the new design. Conclusion: The anthropometric database proposed in this study is likely to be useful in designing Kolhapuri footwear manufacturing tools. The proposed workstation and work layout are helpful to improve the accessibility of required tools and materials to footwear workers. It also helps to reduce occupational risks by easing uncomfortable work positions.
Postural analysis and ergonomic intervention of unorganized workers in indian construction sectors

Guru Prakash Kumar,Ramesh Babu Thangavelu

DOI: https://doi.org/10.3233/WOR-220557

2024-09-11

Work

Abstract:Background: In India's fast-growing economy, the construction sector offers significant developments with huge employment opportunities but poses risks due to poor working environments and uncomfortable postures. Traditional methods, such as manual material handling, can lead to health hazards and musculoskeletal disorders such as overexertion, low back pain, etc. Objective: The purpose of this study was to analyze the working postures of unorganized employees engaged in residential buildings using Ergofellow software and to recommend changes in their unsafe working postures. Methods: Participants' working positions were video recorded and the postures were analyzed using Rapid Upper Limb Assessment (RULA), Rapid Entire Body Assessment (REBA) and Ovako Working Posture Analysis (OWAS). Paired sample t-tests were used to analyze significant differences between the RULA and REBA scores after the ergonomic interventions were implemented. Results: From the analysis of RULA, REBA and OWAS, the working postures showed a high risk of potential injury and required an immediate change in employees' working postures. The RULA and REBA scores were subsequently lower after the ergonomic interventions, which were based on ergonomic and safety principles. The paired sample t-tests with p-values of less than 0.05 demonstrated decreased risks after ergonomic interventions. Conclusion: Working postures of the construction workers exposed to musculoskeletal disorders were examined and the ergonomic interventions were implemented. According to the recommendations, working positions were changed, and employee well-being was enhanced by reduced operational risks.
Ergonomic Design and Development of Poultry Dressing Table for Hygienic Processing

Tanbir Ahmad,Nilesh N. Gaikwad,Yogesh Kumar,Rahul K. Anurag

DOI: https://doi.org/10.52151/jae2016533.1609

2024-02-09

Abstract:Traditional manual poultry processing accounts for approximately 95% of all poultry meat consumed in India. Indian poultry processing sector almost operates as a live-bird market. Poultry processing in these markets is characterized by poorly designed dressing table, floor dressing, non-separation of clean and unclean area, improper carcass washing leading to unhygienic meat processing. An arc shaped table was designed taking into consideration both ergonomics and hygiene requirements for the dressing of poultry carcasses. The workspace envelope and reach of a person influenced the design in terms of shape, height, length and width of the table. The height of table was adjustable in the range of 910±100 mm at the table top to accommodate the variation in human height. The width of the table was variable, and at the centre it was 490 mm while at both ends it was 640 mm. The length of arc of the table at the outer and inner edge was 2220 mm and 900 mm, respectively. The main utilities fixed on the table were a sink, water tap, dicing board, temporary meat holding bowl, weighing balance, and money box. Two dressing hooks were provided over the sink for dressing poultry in hanging position.
CONCEPTUAL DESIGN, FABRICATION AND VALIDATION ON PROTOTYPE OF INDUSTRIAL ERGONOMIC TROLLEY-LIFTER FOR WOOD FURNITURE INDUSTRY

Nurhanisah Mohd Hawari,Ruhaizin Sulaiman,Che Me Rosalam

DOI: https://doi.org/10.47836/ac.16.2.paper08

2023-12-28

Design

Abstract:Over the past several decades, ergonomics design has been demanded and considered as a main factor of efficiency and effectiveness in optimising production. Recently, a lot of research has paid attention to the risk factors on WMSDs and its prevention strategies. However, little attention has been paid to physical ergonomic intervention and its validation. This study was conducted among ten woodworkers in a medium-sized woodworking workshop in Selangor, Malaysia. Through this study, demographic surveys, QEC, and REBA were examined before and after the ergonomic intervention of the industrial ergonomic trolley-lifter. The results of QEC and REBA as well as the survey indicated that comfort perception improved when postural measurement in task performance was at an acceptable range. In addition, work time with external load was reduced by 75% due to the proposed trolley. The trolley-lifter offers an alternative solution to lifting activity by providing a lifting product to assist the handling of wood board in efficiency and occupational safety and health conditions.
A Data Analytic End-to-end Framework for the Automated Quantification of Ergonomic Risk Factors Across Multiple Tasks Using a Single Wearable Sensor

Saeb Ragani Lamooki,Sahand Hajifar,Jiyeon Kang,Hongyue Sun,Fadel M. Megahed,Lora A. Cavuoto

DOI: https://doi.org/10.1016/j.apergo.2022.103732

2022-01-01

Abstract:Existing ergonomic risk assessment tools require monitoring of multiple risk factors. To eliminate the direct observation, we investigated the effectiveness of an end-to-end framework that works with the data from a single wearable sensor. The framework is used to identify the performed task as the major contextual risk factor, and then estimate the task duration and number of repetitions as two main indicators of task intensity. For evaluation of the framework, we recruited 37 participants to complete 10 simulated work tasks in a laboratory setting. In testing, we achieved an average accuracy of 92% for task identification, 7.3% error in estimation of task duration, and 7.1% error for counting the number of task repetitions. Moreover, we showed the utility of the framework outputs in two ergonomic tools to estimate the risk of injury. Overall, we indicated the feasibility of using data from wearable sensors to automate the ergonomic risk assessment in workplaces.
Design of Table and Chairs for Packaging Tempe Chips Work Station for Reducing the Risk of Occupational Diseases in Putra Tunggal Home Industry Wonosobo

Ahmad Saifulloh Faqih,Guntarti Tatik Mulyati,Wagiman Wagiman

DOI: https://doi.org/10.22146/aij.v11i1.93911

2024-07-15

Abstract:Home Industry Putra Tunggal Wonosobo is a tempeh chip industry whose production process is manual, so it can have a negative impact on worker ergonomics. Preliminary research was conducted by interviewing pain complaints and assessing work posture using the OWAS method. The tempeh chips packaging workstation was the workstation that had the most pain complaints at 67.86% (19 of 28 body parts) and the highest OWAS score at 4, so this was at high risk of experiencing musculoskeletal disorders. The next study used the NBM questionnaire to analyze the level of pain due to work and RULA for work posture. CATIA software was used to design tables and chairs, as well as assess the posture of the design results using the RULA method. Worker performance will be compared before and after using tables and chairs based on the level of body pain due to work (NBM) and work posture (RULA). The research results showed a decrease in the risk of work-related diseases by 80 and 78 to 40 and 44 (from high to low-risk levels) as well as a decrease in the RULA score from 7 (dangerous posture) to 2 (good posture).
A User-Centered Ergonomic Design of Cashew Nut Sheller to Mitigate Musculoskeletal Disorders Among Cashew Nut Shelling Workers

Mallampalli, Krishna Chaitanya

DOI: https://doi.org/10.1007/s40032-023-00966-5

2023-06-17

Journal of The Institution of Engineers (India): Series C

Abstract:The present study focused on designing a user-centered ergonomic cashew nut sheller (i.e., a mechanical device to crack the hard-shelled cashew nuts) to mitigate musculoskeletal disorders among cashew nut shelling (CNS) workers. This study consisted of three separate phases. In the first phase, identification of user requirements based on group discussions, screening of gathered user requirements, and questionnaire survey were conducted. Based on the insights from the first phase, three preliminary design concepts were generated and screened down to one final concept by users' consensus. Eventually, the prototype of selected concept of ergonomic cashew nut sheller was developed by applying anthropometric data of users. In the third phase, the ergonomic evaluation of the newly developed ergonomic cashew nut sheller was performed using Rapid Upper Limb Assessment (RULA) and Rapid Entire Body Assessment (REBA) methods. Results showed improvement in RULA and REBA scores, indicating that the musculoskeletal risk was minimized with new ergonomic cashew nut sheller compared to existing sheller. The study demonstrated that the user-centered ergonomic cashew nut sheller design is useful for mitigating WMSDs among CNS workers.

English Else
Data-Driven Ergonomic Risk Assessment of Complex Hand-intensive Manufacturing Processes

Anand Krishnan,Xingjian Yang,Utsav Seth,Jonathan M. Jeyachandran,Jonathan Y. Ahn,Richard Gardner,Samuel F. Pedigo,Adriana,Blom-Schieber,Ashis G. Banerjee,Krithika Manohar

2024-03-06

Abstract:Hand-intensive manufacturing processes, such as composite layup and textile draping, require significant human dexterity to accommodate task complexity. These strenuous hand motions often lead to musculoskeletal disorders and rehabilitation surgeries. We develop a data-driven ergonomic risk assessment system with a special focus on hand and finger activity to better identify and address ergonomic issues related to hand-intensive manufacturing processes. The system comprises a multi-modal sensor testbed to collect and synchronize operator upper body pose, hand pose and applied forces; a Biometric Assessment of Complete Hand (BACH) formulation to measure high-fidelity hand and finger risks; and industry-standard risk scores associated with upper body posture, RULA, and hand activity, HAL. Our findings demonstrate that BACH captures injurious activity with a higher granularity in comparison to the existing metrics. Machine learning models are also used to automate RULA and HAL scoring, and generalize well to unseen participants. Our assessment system, therefore, provides ergonomic interpretability of the manufacturing processes studied, and could be used to mitigate risks through minor workplace optimization and posture corrections.

Human-Computer Interaction,Machine Learning
A combined approach of design for Six Sigma, generic product development process and ergonomics-safety philosophy to reduce musculoskeletal disorder problems

Md Shohel Parvez,Palash Saha

DOI: https://doi.org/10.1108/ijlss-02-2024-0019

2024-11-10

International Journal of Lean Six Sigma

Abstract:Purpose The purpose of this paper is to decrease musculoskeletal disorder (MSD) problems using a combined approach including design for Six Sigma, generic product development process, and ergonomic-safety philosophies. Design/methodology/approach A total of 550 students voluntarily participated in this study. Kolmogorov–Smirnov and t-tests were used to analyze the collected anthropometry. A cause-and-effect diagram, Pareto's chart, a brainstorming session, and a priority matrix were also used to extract the 22 design parameters of the product. Moreover, Cronbach's alpha values were determined to verify the validity of qualitative and quantitative data. Findings Results showed that students are at a high risk of developing MSD issues. The most serious MSD problems among the students were neck pain (74%), back pain (73%), muscle and joint pain (67%), knee pain (57%), leg pain (54%), etc. Besides, all anthropometrics of males are higher than females except Hip Breadth. Among 12 anthropometries, two measurements and one measurement showed statistical significance at p < 0.01 and p < 0.05, respectively. Six design parameters of the mounted desktop (Seat Height, Desk Height, Seat to Desk Clearance, Seat Width, Seat Depth, and Backrest Height) are the most crucial design parameters to design and develop the product. Practical implications The proposed design of the mounted desktop can be used in different tertiary educational institutes to reduce MSDs among students. Originality/value To the best of the authors' knowledge, this is the first attempt that introduces a combined approach to reduce MSD issues by applying Six Sigma, a generic product development process, and ergonomics-safety philosophy to design and measurement of 22 design parameters of mounted desktop for university students.

engineering, industrial,management
Designing a lifting tool work using SNQ and anthropometry

R Ginting,D Nurhadi,A F Malik

DOI: https://doi.org/10.1088/1755-1315/452/1/012091

2020-04-01

IOP Conference Series: Earth and Environmental Science

Abstract:Abstract The production process at PT. Florindo Makmur the operator manually raised 400 sacks during 1 work shift. The sack weight is 25 kg and the number of workers is 5 workers. The problem is that there is a workload on activities at packing stations that have an impact on operator health and safety. Based on the background described, there is a workload that results from a poor work posture which results in complaints from operators. The improvements are needed with the Ergonomics approach. Based on data processing and problem-solving analysis, activities carried out by operators on the production floor using manual methods result in complaints of the pain of the body section. Improvements after measurements of REBA are needed as soon as possible to improve work posture. The work facility that will be designed is an ergonomic hand truck that can ease the work at the packing station. The height of the hand truck is adjusted based on the operator’s standing elbow height which is 79cm because the operator can reach the right and left parts. The hand truck is also equipped with wheels.
Hand Tool Intervention for Rubber Tappers Using Modified Michie Golledge Knife

Abi Varghese,Vinay V Panicker

DOI: https://doi.org/10.1080/1059924X.2024.2404847

2024-09-16

Abstract:Background and objectives: Rubber tapping is a physically demanding and skilled agricultural operation that can cause musculoskeletal disorders (MSDs). This research investigated the impact of using an ergonomically modified rubber tapping knife on the hand posture of rubber tappers. Methods: Initially, a postural assessment was conducted using CATIA V6 modelling software followed by a non-randomized longitudinal study with 32 rubber tappers. In the second phase, the study used a custom-modified Standard Nordic Questionnaire, video recordings, and direct observations. The study compared the results of the ergonomically modified rubber tapping knife with the traditional tapping knife, evaluating hand grip strength, endurance time chip thickness, time required to complete 300 trees, and posture using the Rapid Upper Limb Assessment (RULA) tool. Results: Compared to pre-tapping values, the mean reduction in grip strength after tapping was significantly less with the modified rubber tapping knife than with the traditional tapping knife (2.96 kg, SD 0.85 kg vs 7.31 kg SD 2.13 kg). Similarly, the reduction in hand endurance time was less with the modified knife than with the traditional knife (1.78 seconds, SD 0.47 seconds vs 3.34 seconds, SD 0.87 seconds). The study also indicated that the modified knife did not significantly affect chip thickness. Additionally, a slight increasing in tapping time was observed with the ergonomically modified knife, which may be attributed to a learning curve phenomenon. This suggests that as rubber tappers become more accustomed to the new tool, their efficiency may improve over time. Conclusion: The hand grip strength and endurance time was significantly lower with the ergonomically modified tapping knife. The study concluded that using an ergonomically modified tapping knife led to a significant improvement in hand posture among rubber tappers.
Ergonomic Evaluation and Work Table Design for Wood Furniture Manufacturing Industry

Ashish Kumar Singh,Rahul Jain,Bharat Singh,Makkhan Lal Meena

DOI: https://doi.org/10.1007/978-981-15-9054-2_43

2021-01-01

Abstract:Indian wooden furnitures are generally manufactured in small-scale workshops, where most exercises are performed manually. This examination was led among the laborers of furnishing wooden workshops to check pervasiveness of musculoskeletal disorders (MSDs). The objective of this study was to understand the MSDs and postures involved among the workers during furniture manufacturing. Survey questionnaire and indices were statistically analyzed to investigate further problems in the workers. In this study, 103 male workers working in workshops located in Jodhpur district were randomly selected for participation in the study. The Modified Nordic Musculoskeletal Questionnaire and checkpoints consisting of 11 body regions were used as information assortment tools. A VAS score was calculated for each section of the listing. Ergonomic evaluation of postures from 150 still photographs from 30 workers was done using ImageJ freeware and awkward posture of workers identified to improve the posture. Rapid Upper Limb Assessment (RULA) technique was used for the postural assessment. Work table modeling in Autodesk Inventor with adjustable height was done, and the postures were reanalyzed. The highest prevalence of symptoms was reported within the lower back (71.5%), upper back (52.17%). Lower back was among the highest priority as it has the highest VAS score following the upper back and knee. It was found that the RULA score for modified work table indicated reduction by around 87% when compared to the conventional postures. After modification of table, the worker’s priority scores (mean 3.1; SD 0.58) were curtailed to an extent.
Effective Office Ergonomics Awareness: Experiences from Global Corporates

Kishore P Madhwani,P K Nag

DOI: https://doi.org/10.4103/ijoem.IJOEM_151_17

Abstract:Background: Use of laptops and hand-held devices increase the risk of musculoskeletal disorders (MSDs). More time spent on this activity adopting faulty postures, higher the risk of developing such injuries. This study addresses training on office ergonomics with emphasis on sustainable behavior change among employees to work in safe postures, as this is a top priority in the corporate environment, today. Aim: To explore training intervention methods that ensure wider coverage of awareness on office ergonomics, thereby promoting safer working and suggesting sustainable programs for behavior change and job enrichment. Materials and methods: A cross-sectional study was conducted (2012 - 2017), encompassing corporate office employees of multinational corporations selected from India, Dubai (U.A.E), Nairobi (East Africa), Durban (South Africa), South East Asian countries (Philippines, Vietnam, Indonesia, Singapore, Malaysia, Thailand and Sri Lanka).Participant employees (n = 3503) were divided into two groups to study the effect of interventions'; i.e., (a) deep training: 40 minute lecture by the investigator with a power point presentation (n = 1765) using a mock workstation and (b) quick training: live demonstrations of 10 minutes (n = 1738) using a live workstation. Results: While deep training enhanced awareness in 95.51% and quick training in 96.59% globally, the latterwas much appreciated and educated maximum employees. From statistical analysis, quick training was found superior in providing comprehensive training and influencing behavior modification in India, but all over the world it was found highly superior in knowledge enlargement, skills enrichment in addition to providing comprehensive training (P < 0.05). In countries, located to West of India, it significantly influenced behavior modification. Conclusion: As because few employees attend deep training lectures, the quick 10-minute program is highly promising as it is practical, replicable, yields increased awareness with wider employee coverage in a much shorter time, instilling a feeling of caring and confidence amongst them towards a robust office ergonomics program. This could lead to propose as a best practice for corporate offices globally.
Safety management practices in small and medium enterprises in India

Seema Unnikrishnan,Rauf Iqbal,Anju Singh,Indrayani M Nimkar

DOI: https://doi.org/10.1016/j.shaw.2014.10.006

Abstract:Background: Small and medium enterprises (SMEs) are often the main pillar of an economy. Minor accidents, ergonomics problems, old and outdated machinery, and lack of awareness have created a need for implementation of safety practices in SMEs. Implementation of healthy working conditions creates positive impacts on economic and social development. Methods: In this study, a questionnaire was developed and administered to 30 randomly chosen SMEs in and around Mumbai, Maharashtra, and other states in India to evaluate safety practices implemented in their facilities. The study also looked into the barriers and drivers for technology innovation and suggestions were also received from the respondent SMEs for best practices on safety issues. Results: In some SMEs, risks associated with safety issues were increased whereas risks were decreased in others. Safety management practices are inadequate in most SMEs. Market competitiveness, better efficiency, less risk, and stringent laws were found to be most significant drivers; and financial constraints, lack of awareness, resistance to change, and lack of training for employees were found to be main barriers. Conclusion: Competition between SMEs was found to be major reason for implementation of safety practices in the SMEs. The major contribution of the study has been awareness building on safety issues in the SMEs that participated in the project.
The Prevention of Industrial Manual Tool Accidents Considering Occupational Health and Safety

Ricardo P. Arciniega-Rocha,Vanessa C. Erazo-Chamorro,Gyula Szabo

DOI: https://doi.org/10.3390/safety9030051

2023-07-27

Safety

Abstract:The industrial sector is improving its management systems and designing healthy workspaces by focusing on selecting the best ways to reduce accidents and optimize financial and human resources. Hand tools represent the general equipment used in a significant range of industrial jobs. This research aims to develop a tool selection method to help users, managers, and tool designers ensure awareness and care regarding ergonomics based on the anthropometrics of employees, considering the main risk factors for tool selection. The information, which relates to hand security risk factors and the established parameters set by official international institutions, is evaluated during the study. This paper also presents a safety risk assessment framework based on criteria collected through a survey from 10 experts to rate the initial risk value and determine its importance using the analytical hierarchy process (AHP). As a result, the analysis identified the possibility of injury (with 73.06% accuracy) as the biggest concern for companies due to its immediate effects on workers' health. It provides a decision regimen—a tool for decision-makers to design and plan prevention activities to reduce accidents, injuries, and possible illnesses. It further lays out a methodical and analytical model to be used by managers to ensure correct hand tool selection. This model can be used to reduce the possibility of illnesses or injuries for workers and tailor the ergonomic design of each workstation according to specific hand anthropometric data for the worker.
Analysis of the Reduction of Ergonomic Risks through the Implementation of an Automatic Tape Packaging Machine

Ruan C M Teixeira,Walter P S Guimarães,Josiel G Ribeiro,Rubens A Fernandes,Lennon B F Nascimento,Israel G Torné,Fábio S Cardoso,Gabriella R Monteiro

DOI: https://doi.org/10.3390/ijerph192215193

2022-11-17

Abstract:Many industrial sectors still lack automation resources to optimize their production processes, aiming to make manufacturing leaner and offer better working conditions to operators. Without these improvements, workers can suffer physical and even psychological damage from the ergonomic risks of the activities performed. Thus, the aim of this paper is to present the ergonomic evaluation of packaging tapes workstation before and after the implementation of an automatic packaging machine, called Guzzetti. In the Guzzetti context, the paper shows the implementation of an electrical system based on controlling a mechanical device powered by servomotors and controlled by a PLC is necessary. For ergonomic evaluation, the paper presents the application of three methods: Suzanne Rodger, Strain Index, called Moore and Garg and REBA (Rapid Entire Body Assessment). With the results collection, was possible to obtain improvements in ergonomic risks that changed from the intermediate level to low level in all methods.

Psychological predictors of weight loss after bariatric surgery: a review of the recent research.

Design Intervention for Sole Cutting Operation in Hand-Sewn Kolhapuri Footwear Manufacturing in India

Managing ergonomic risk assessment among assembly operators in the small‐scale fabrication sector

Practical lean for physician leaders.

Tyrosine-Specific Chemical Modification with in Situ Hemin-Activated Luminol Derivatives.

Ergonomics and efficient workplace design for hand-sewn footwear artisans in Kolhapur, India

Postural analysis and ergonomic intervention of unorganized workers in indian construction sectors

Ergonomic Design and Development of Poultry Dressing Table for Hygienic Processing

CONCEPTUAL DESIGN, FABRICATION AND VALIDATION ON PROTOTYPE OF INDUSTRIAL ERGONOMIC TROLLEY-LIFTER FOR WOOD FURNITURE INDUSTRY

A Data Analytic End-to-end Framework for the Automated Quantification of Ergonomic Risk Factors Across Multiple Tasks Using a Single Wearable Sensor

Design of Table and Chairs for Packaging Tempe Chips Work Station for Reducing the Risk of Occupational Diseases in Putra Tunggal Home Industry Wonosobo

A User-Centered Ergonomic Design of Cashew Nut Sheller to Mitigate Musculoskeletal Disorders Among Cashew Nut Shelling Workers

Data-Driven Ergonomic Risk Assessment of Complex Hand-intensive Manufacturing Processes

A combined approach of design for Six Sigma, generic product development process and ergonomics-safety philosophy to reduce musculoskeletal disorder problems

Designing a lifting tool work using SNQ and anthropometry

Hand Tool Intervention for Rubber Tappers Using Modified Michie Golledge Knife

Ergonomic Evaluation and Work Table Design for Wood Furniture Manufacturing Industry

Effective Office Ergonomics Awareness: Experiences from Global Corporates

Safety management practices in small and medium enterprises in India

The Prevention of Industrial Manual Tool Accidents Considering Occupational Health and Safety

Analysis of the Reduction of Ergonomic Risks through the Implementation of an Automatic Tape Packaging Machine