Abstract:Building Services Engineering Research and Technology, Ahead of Print. Indoor air quality and heating energy consumption are closely linked, especially in densely occupied spaces, as classrooms. In a classroom of Rennes University, a transient thermal simulation highlights the impact of ventilation on heating consumptions for different cases: (1) without controlled mechanical ventilation (CMV), (2) with a single flow CMV (SF CMV) of a regulatory flow of 18 m3.h−1. person−1 during periods of occupancy, and (3) a double flow CMV (DF CMV) whose flow is during periods of occupancy either equal to 18 m3.h−1. person−1 or (4) to 35 m3.h−1.person−1. The infiltration flowrate was evaluated experimentally using CO2 concentration measurements in the first case, which corresponds to the actual situation. In the normal use of the classroom with 30 persons inside, CO2 concentration exceeds 5000 ppm and the heating energy consumption is equal to 52 kWh.m−2.year−1. In case (2) and (3), CO2 concentration has a maximum level of 1350 ppm and the energy consumption is equal to 65 and 53 kWh.m−2.year−1, respectively. In case (4), the maximum CO2 concentration stays in the range 800-900 ppm without excessive heating consumption (58 kWh.m−2.year−1). Finally, by limiting the fresh air flowrate to 18 m3.h−1.person−1 in DF CMV and coupling it to a façade insulation (extra Case 5), the heating consumption is reduced to 32 kWh.m−2.year−1. These results are valuable within the context of the upcoming energy renovation strategy of the campus.Practical applicationIn most schools, in France and elsewhere, insufficient ventilation flowrates are often observed compared to regulatory requirements. If compliance with ventilation standards and the subsequent revision of CMV installations are necessary to ensure the health of users, it is important to evaluate the energy cost of these renovations, and to identify the best choice to reduce heating consumptions. Our contribution is to compare different renovation choices in terms of two indicators: energy consumption and indoor air quality evaluated using CO2 concentration.

Estimating Air Change Rate in Mechanically Ventilated Classrooms Using a Single CO 2 Sensor and Automated Data Segmentation

Estimating Air Change Rate in Mechanically Ventilated Classrooms Using a Single CO2 Sensor and Automated Data Segmentation

Robustness of point measurements of carbon dioxide concentration for the inference of ventilation rates in a wintertime classroom

The impact of real-time carbon dioxide awareness on occupant behavior and ventilation rates in student dwellings

Indoor air quality in classrooms: Environmental measures and effective ventilation rate modeling in urban elementary schools

Evaluation of Different Natural Ventilation Strategies by Monitoring the Indoor Air Quality Using CO2 Sensors

Development of a Bayesian inference model for assessing ventilation condition based on CO2 meters in primary schools

Low-cost sensor-based investigation of CO 2 and volatile organic compounds in classrooms: Exploring dynamics, ventilation effects and perceived air quality relations

Spatial features of CO2 for occupancy detection in a naturally ventilated school building

Examination and Optimization of Classroom Indoor Environments in China’s Hot Summer and Cold Winter Regions

Improving the ventilation of a classroom to achieve heating energy savings and better indoor air quality

Estimation of children's CO 2 generation rates in naturally ventilated educational buildings

Association of Indoor Temperature and Air Quality in Classrooms Based on Field and Intervention Measurements

Carbon Dioxide (CO2) Demand-Controlled Ventilation in University Computer Classrooms and Possible Effects on Headache, Fatigue and Perceived Indoor Environment: an Intervention Study

Comparative Analysis of CO2 Tracer Gas Methods for the Measurement of Air Change Rates in Student Dormitory Rooms with Open/closed Window Statuses

Implementing Bayesian inference on a stochastic CO2-based grey-box model for assessing indoor air quality in Canadian primary schools

Monitoring and Modelling Indoor Air Quality and Ventilation in Classrooms within a Purpose-Designed Naturally Ventilated School

Multi-zone Outdoor Air Coordination Through Wi-Fi Probe-Based Occupancy Sensing

Preventing mold growth and maintaining acceptable indoor air quality for educational buildings operating with high mechanical ventilation rates in hot and humid climates

Optical portable instrument for the determination of CO2 in indoor environments

An Ips-Calibrated Outdoor Air Flow Control Strategy in Multizone Commercial Space