Abstract:With the raw materials of poly(vinylidene-co-hexafluoropropylene) (P(VDF-HFP)) and polyamide 6 (PA6, nylon 6), a sandwich-structured composite membrane, PA6/P(VDF-HFP)/PA6, is fabricated via sequential layer-by-layer electrospinning. The nylon-based composite exhibits high absorption to organic liquid electrolyte (270 wt%) owing to its high porosity (90.35%), good mechanical property (17.11 MPa), and outstanding shut-down behavior from approximately 145 to 230 degrees C. Moreover, the dimensional shrink of a wet PA6 porous membrane immersed into liquid electrolyte is cured due to the existence of the P(VDF-HFP) middle layer. After swelling by the LiPF6-based organic liquid electrolyte, the obtained PA6/P(VDF-HFP)/PA6-based gel polymer electrolytes (GPE) shows high ionic conductivity at room temperature (4.2 mS cm(-1)), a wide electrochemical stable window (4.8 V), and low activation energy for Li(+)ion conduction (4.68 kJ mol(-1)). Benefiting from the precise porosity structure made of the interlaced electrospinning nanofibers and the superior physicochemical properties of the nylon-based composite GPE, the reversible Li(+)ion dissolution/deposition behaviors between the GPE and Li anode are successfully realized with the Li/Li symmetrical cells (current density: 1.0 mA cm(-2); areal capacity: 1.0 mAh cm(-2)) proceeding over 400 h at a polarization voltage of no more than 70 mV. Furthermore, the nylon-based composite GPE in assembled Li/LiFePO(4)cells displays good electrochemical stability, high discharge capacity, good cycle durability, and high rate capability. This research provides a new strategy to fabricate gel polymer electrolytes via the electrospinning technique for rechargeable lithium batteries with good electrochemical performance, high security, and low cost.

Electrospinning-assisted porous skeleton electrolytes for semi-solid Li-O2 batteries

Electrospun gel composite electrolyte of solvent-free SiO 2 nanofluids coupled polyacrylonitrile nanofibers for high-rate lithium-metal batteries

Electrospun Polyacrylonitrile (PAN)-Based Polymer Gel Electrolytes for Lithium-Ion Batteries

In-Situ Synthesized Gel Polymer Electrolyte Enable High Capacity and Long-Cycle-Life Lithium Metal Batteries

Interconnected Three-Dimensional Porous Alginate-Based Gel Electrolytes for Lithium Metal Batteries

Advancements in Performance Optimization of Electrospun Polyethylene Oxide-Based Solid-State Electrolytes for Lithium-Ion Batteries

In‐situ construction of poly(tetraisopentyl acrylate) based gel polymer electrolytes with LixLa2‐xTiO3 for high energy density lithium‐metal batteries

Electrospun Polyethylene Oxide (PEO)-Based Composite polymeric nanofiber electrolyte for Li-Metal Battery

Gel Polymer Electrolytes Based on Silica-Added Poly(ethylene oxide) Electrospun Membranes for Lithium Batteries

3D nanofiber framework based on polyacrylonitrile and siloxane-modified Li6.4La3Zr1.4Ta0.6O12 reinforced poly (ethylene oxide)-based composite solid electrolyte for lithium batteries

Electrospun octa(3-chloropropyl)-polyhedral oligomeric silsesquioxane-modified polyvinylidene fluoride/poly(acrylonitrile)/poly(methylmethacrylate) gel polymer electrolyte for high-performance lithium ion battery

In Situ Nano-SiO2 Electrospun Polyethylene-Oxide-Based Nano-Fiber Composite Solid Polymer Electrolyte for High-Performance Lithium-Ion Batteries

Tailor-Made Electrospun Multilayer Composite Polymer Electrolytes for High-Performance Lithium Polymer Batteries

Engineering the Structural Uniformity of Gel Polymer Electrolytes via Pattern‐guided Alignment for Durable, Safe Solid‐state Lithium Metal Batteries

An Advanced Gel Polymer Electrolyte for Solid-State Lithium Metal Batteries

Gel electrolyte and anode material derived from electro-spun polyacrylonitrile/polysilsesquioxane composite and application in advanced lithium-ion batteries

In Situ Polymerization Derived from PAN-Based Porous Membrane Realizing Double-Stabilized Interface and High Ionic Conductivity for Lithium-Metal Batteries

Nylon-Based Composite Gel Membrane Fabricated via Sequential Layer-By-Layer Electrospinning for Rechargeable Lithium Batteries with High Performance

Composite Solid Electrolyte with Continuous and Fast Organic-Inorganic Ion Transport Highways Created by 3D Crimped Nanofibers@functional Ceramic Nanowires

Supramolecular Network Structured Gel Polymer Electrolyte with High Ionic Conductivity for Lithium Metal Batteries

The Effects of Electrospinning Structure on the Ion Conductivity of PEO-Based Polymer Solid-State Electrolytes