Abstract:The removal of phosphate from water has attracted increasing attention because of the dominant role of phosphate in eutrophication. In this study, a novel nanoscale hybridized adsorbent, , was fabricated by immobilizing nanosized lanthanum carbonate (NLC) into the pores of the macro-porous polyacrylic anion exchanger D213 through an in-situ precipitation method for phosphate adsorption from wastewater. exhibited excellent pH tolerance and possessed a high selectivity for phosphate in the presence of competing anions (Cl–, NO3–, SO42–, SiO32–, and HCO32–) and organic acids (humic, tannic, and gallic acids). The maximum phosphate adsorption capacity reached 53.64 mg P/g at 30 °C. Moreover, fixed-bed column adsorption experiments demonstrated that could effectively treat 2400 bed volumes of real secondary effluent (phosphate concentration decreased from 2.0 to <0.5 mg P/L). The exhausted could be regenerated easily using a binary solution of NaCl (1.5 mol/L)–Na2CO3 (3 mol/L), and no significant capacity loss was observed during the recycling for column adsorption–desorption. The underlying mechanism of phosphate adsorption was investigated by a combination of Fourier-transform infrared, transmission electron microscopy, and X-ray photoelectron spectroscopy, and the formation of LaPO4·xH2O was suggested to be the main pathway in the separation process of phosphate from real secondary effluent.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.jced.0c00352?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.jced.0c00352</a>.Effect of lanthanum chloride concentration on phosphate adsorption; chemical structure of D213 and D201; SEM images of D213 and ; XPS analysis of ; FTIR spectra of D213, , and after P adsorption; phosphate species distribution versus pH; adsorption isotherm of phosphate by ; La dissolution from ; XRD diffractograms; TEM image of after P saturation; Langmuir and Freundlich model isotherm parameters of phosphate adsorption onto ; comparison of phosphate adsorption capacity for different La-based materials; and thermodynamic parameters of sorption for phosphate (<a class="ext-link" href="/doi/suppl/10.1021/acs.jced.0c00352/suppl_file/je0c00352_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

High-performance electrosorption of lanthanum ion by Mn3O4-loaded phosphorus-doped porous carbon electrodes via capacitive deionization

Facile preparation of dual La-Zr modified magnetite adsorbents for efficient and selective phosphorus recovery

Effective electrosorption and recovery of phosphorus by capacitive deionization with a covalent organic framework-membrane coating electrode

Unlocking Bimetallic Active Centers via Heterostructure Engineering for Exceptional Phosphate Electrosorption: Internal Electric Field-Induced Electronic Structure Reconstruction

Capacitive deionization exploiting La-based LDH composite electrode toward energy efficient and selective removal of phosphate

Efficient removal and selective recovery of phosphorus by calcined La-doped layered double hydroxides

Great enhancement in phosphate uptake onto lanthanum carbonate grafted microfibrous composite under a low-voltage electrostatic field

Construction of lanthanum modified MOFs graphene oxide composite membrane for high selective phosphorus recovery and water purification

Lanthanum-Integrated Porous Adsorbent for Effective Phosphorus Removal

Incorporation of edge-N into La-doped hierarchical carbon framework enables high-efficiency phosphate electrosorption: Boosting accessible active centers and bridging charge transfer paths

Efficient Recovery of Phosphate by Fe3O4/La-MOF: an Insight of Adsorption Performance and Mechanism from Electrochemical Properties

Fabrication of sodium alginate doped phosphoric acid composite hydrogel and its application of the adsorption of La (III) in wastewater

In-situ Construction of Abundant Active Centers on Hierarchically Porous Carbon Electrode Toward High-Performance Phosphate Electrosorption: Synergistic Effect of Electric Field and Capture Sites

PVA/PEI crosslinked electrospun nanofibers with embedded La(OH)3 nanorod for selective adsorption of high flux low concentration phosphorus

Deciphering heterojunction layered double hydroxide-polyaniline-carbon nanotubes for phosphorus capture in capacitive deionization

Facile synthesis of la2(co3)3-diatomite composites for the continuous removal of low-concentration phosphate

Facile Synthesis of Lanthanum-Doped Fe-Based MOF for Phosphate Removal from Water: High Adsorption Capacity, Tuneability, and Reproducibility

Activation of Lattice Oxygen in LaFe (oxy)hydroxides for Efficient Phosphorus Removal

Nanoscale Lanthanum Carbonate Hybridized with Polyacrylic Resin for Enhanced Phosphate Removal from Secondary Effluent

Vacancy engineering of FeP dispersed N, P-doped porous carbon for high-performance capacitive deionization